JL Audio XD600/6V2

The  XD600/6V2 is a high-quality 6-channel amplifier from JL Audio, known for its quality and performance. This full-range Class D amplifier offers an impressive 600W of power and is equipped with JL's innovative NexD™ Ultra-high-speed switching design, which guarantees excellent efficiency and a minimum of distortion. The XD600/6V2 impresses with its flexibility, whether as a six-channel satellite amplifier or as a bridged four-channel amplifier with staggered power. In addition, it has a 12 dB/octave filter for each channel bank and the v2 Spec functionality. An optional HD-RLC remote control enables indirect control of the gain level. All this makes the XD600/6V2 a real powerhouse, packed in a compact and elegant housing with a black powder coating and brushed aluminum cover.

• 6-channel full-range amplifier in Class D, 100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω - 14.4V
  
• The breakthrough that makes so much power possible in such a small package is JL's NexD™ Ultra-high-speed switching design that enables full-bandwidth Class D operation with extremely low distortion and excellent efficiency.
  
• Use it as a six-channel satellite amplifier with 75W x 6 @ 4Ω, or bridge two of its channels to create a four-channel amplifier with staggered power with 200W x 2 @ 4Ω for your front satellites and 75W x 2 @ 4Ω for the rear satellites. You can also  two subwoofers with 200 W each and a pair of satellites with 75 W x 2.
  
• The XD600/6v2 includes a 12 dB/octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers a continuous selection of the cutoff frequency from 50-500 Hz.
  
• The XD600/6v2 also features the v2 Spec feature set, which consists of an automatic power-on function (via signal sampling or DC offset sampling) and a differentially balanced dual-range input section capable of handling a wide range of input voltage levels.
• With an additional HD-RLC remote control (sold separately), the amplifier level can be controlled directly from the driver's seat.
  
• This amplifier features a black powder coated finish and a sealed brushed aluminum cover for the controls.

• @ 4 Ω : 75 W RMS x 6
• @ 2 Ω : 100 W RMS x 6
• Bridged @ 4Ω : 200 W RMS x 3

• @ 4 Ω : 60 W RMS x 6
• @ 2 Ω : 90 W RMS x 6
• Bridged @ 4Ω : 180 W RMS x 3

• Frequency response: 12 Hz - 22 kHz (+0, -1dB)
  
• S/N ratio, based on the highest rated power: >104 dB below the rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  
• Damping factor @ 4 Ω : >150 / 50 Hz
  
• Damping factor @ 2 Ω : >75 / 50 Hz
  
• THD+N @ rated power: <1% @ 2 Ω per Ch.
  
• Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V ​​RMS (high)
  
• Minimum cable diameter  : 25mm²
  
• Fuse rating: 50 A (AFS, AGU or MaxiFuse™ )

• Filter mode: low-pass or high-pass
  
• Filter slope: 12 dB/octave
  
• Filter frequency range: 50 Hz - 500 Hz
  
• Calibrated filter frequency potentiometer: Yes
  
• Filter defeat function: Yes
  
• Remote control: Optional (HD-RLC)
  
• Remote level modes: 2 or 4 or all channels
  
• Channel input mode switch : Yes (2/4/6 channel)
  
• Pass-through preamp output : None
  

• Height (H): 52 mm (2.05 inches)
  
• Width (W): 260 mm (10.23 inches)
  
• Depth (D) : 180 mm (7.09 inches)
  
• Net weight: 5.8 lb / 2.63 kg