Morel Hybrid 63

Beschreibung

The passive Morel Hybrid 63 3-way  6.5 " (16.5cm) speaker system takes its name from the ferrite and neodymium magnets that drive the damped 6.5" polymer woofer. The woofer benefits massively from its robust one-piece dust cap and diaphragm structure, and Morel uses new Hexatech aluminum voice coil technology for better heat dissipation and efficient performance.
Morel's Hybrid Series component speakers are known for their reliability and distinctive sound. The MT300 soft dome tweeter, fitted with an Acuflex™ compound for maximum damping, adds to the definition of this speaker system with its warm highs. This system's external MXR crossovers provide the ideal mix of highs and lows for an incredible stereo image. In addition, the tweeter has two levels of control so you can tailor the sound to your vehicle's environment. The CDM700 dome midrange driver rounds out the system and provides incredibly smooth transitions from lows to highs.

characteristics

> characteristics

• 3-way component speaker system
  
• Contains two tweeters, two midrange speakers, two woofers, two crossovers
  
• 6-1/2" one-piece dampened polymer cone (DPC)
  
• 2.1" midrange driver with flat silk dome
  
• 1.1" Acuflex coated silk dome tweeter
  
• External crossover with two level settings for the tweeter
  
• Load capacity up to 140 watts RMS (600 watts peak power)
  
• Frequency response: 35-25,000 Hz
  
• Sensitivity: 91 dB at 2.83 V
  
• Installation depth midrange speaker:  2.2cm
  
• Installation depth tweeter:  1.3cm
  
• Installation depth woofer:  6.2cm
  
• Diameter of the woofer cutout:  14.1cm
  
• including grille

Scope of delivery 

• Morel Hybrid 63 User Manual
  
• Two MW6 mkII woofer
  
• Two CDM700 midrange speakers
  
• Two MT300 tweeters (with included 7" speaker cable)
  
• 2 MXR300.4 crossovers
  
• 2 woofer grilles (installed)
  
• 2 midrange grilles (installed)
  
• 2 tweeter grilles (installed)
  
• 2 tweeter housings for flush installation (with built-in tweeters)
  
• 2 brackets for flush mounting
  
• 2 angled tweeter enclosures for surface mounting
  
• 2 rubber feet for the surface-mounted housing
  
• 8 mounting brackets for midrange speakers
  
• Twelve 3/4" screws
  
• Four 1" screws
  
• Eight 1-1/4" screws
  
• 8 clips for high speed
  
• 6 small speed clamps
  
• putty for the grid
  
• Eight 0.25" crimp-on quick-release fasteners
  
• Two 0.187" crimp quick-release fasteners
  
• Two 0.110" crimp quick-release fasteners
  
• Two 0.187" insulation covers for quick slide valves
  
• Two insulating covers with 0.110" quick release fasteners
  
• installation instructions
  
• warranty card