FaitalPro HF146R
Horn tweeter
/Piece
Inkl. MwSt. Exkl. MwSt. inkl. Versandkosten exkl. Versandkosten
Du sparst 5% auf diesen Artikel, indem du beim Bestellvorgang die Zahlungsart Vorkasse (Banküberweisung) wählst Der Rabatt wird automatisch abgezogen!
Günstiger gesehen?
„Wir halten mit - garantiert!" Nutze die Tiefpreisgarantie! Wenn du einen Artikel auf einer Internetseite innerhalb der EU günstiger findest, ziehen wir mit dem Preis der Konkurrenz gleich und legen einen Artikel aus unserem Zubehörsortiment bei.
Beschreibung
The FaitalPro HF146R tweeter is a high-quality speaker solution that offers impressive performance and a wide frequency range. With an impedance of 8 ohms, it delivers 90 dB and an efficiency of 108 dB and can reproduce frequencies up to 20 kHz. The HF146R enables amazing audio quality and consistent sound reproduction.
_msttexthash="438607" _msthash="1" TECHNICAL PARAMETERS - 8 Ohm
- nominal impedance 8 ohms
- Minimum impedance 6.8 ohms
- RMS power above 0.9 kHz 80 W
- RMS power above 0.65 kHz 40 W
- Maximum power above 0.9 kHz 160 W
- Maximum power above 0.65 kHz 80 W
- Minimum crossover frequency 0.9 kHz
- Sensitivity (1W/1m) 109 dB
- frequency range 0.7-18 kHz
- voice coil diameter 65 mm
- winding material Al
- Former material Kapton
- membrane material ketone polymer
- membrane-shaped dome
- winding depth 3.75 mm
- Magnetic gap depth 4.2 mm
- flux density 1.7 T
- Magnet Neodymium Slug Crown
- Re 5.5 Ohm
- phase plug design ring-shaped
- Exit angle (5) 29° conical
- NET air volume filled with HF driver 0.55 dm^3 (0.019 ft^3)
SPECIFICATIONS
- neck diameter 35.6 mm
- total diameter 123 mm
- 90° mounting holes diameter (4xM6) 102 mm
- depth 63.5 mm
- net weight 2 kg
TECHNICAL PARAMETERS - 16 Ohm
- nominal impedance 16 ohms
- Minimum impedance 15 ohms
- RMS power above 0.9 kHz 80 W
- RMS power above 0.65 kHz 40 W
- Maximum power above 0.9 kHz 160 W
- Maximum power above 0.65 kHz 80 W
- Minimum crossover frequency 0.9 kHz
- Sensitivity (1W/1m) 109 dB
- frequency range 0.7-18 kHz
- voice coil diameter 65 mm
- winding material Al
- Former material Kapton
- membrane material ketone polymer
- membrane-shaped dome
- winding depth 3 mm
- Magnetic gap depth 4.2 mm
- flux density 1.7 T
- Magnet Neodymium Slug Crown
- Re 11 Ohm
- phase plug design ring-shaped
- Exit angle (5) 29° conical
- NET air volume filled with HF driver 0.55 dm^3 (0.019 ft^3)