With the PICO V2 8|10 DSP sends MOSCONI the second generation of the PICO DSP amplifiers into the car hi-fi market. In addition to improved connectivity, the new PICO impresses with enhanced sound performance and better efficiency. All connections are now located on one side, and under a magnetic housing cover are all the relevant adjustment switches needed for operation in modern vehicles. Furthermore, all inputs are now capable of high and low level. All desired DSP settings can now be made via a USB-C connection.

Perfect OEM Integration

Powerful DSP amplifier, optimized for use with factory radios. Six analog inputs up to 30 V, flexible routing, 3 x input EQ and delay. With 4 x 50 watts + 4 x 80 watts, ideal for active and semi-active systems, as well as classic front + rear + sub applications. With two digital inputs (SP-Dif and BT+) and two processed line-outs ready for the future.

Transformerless High Speed PWM Amplifiers

Highly efficient PWM output stages with the currently fastest carrier frequency in the world (> 2 MHz), enabling HiRes audio transmission and the extremely small form factor. The modulation occurs directly from the 96 kHz TDM signal of the DSP without a DAC, resulting in a noise floor close to zero and THD + N ~ 0.02 % / 1 W.

entry page

• 8 x switchable analog inputs (High-Level / Low-Level) Class SB compatible, 2-30V
• 1 x Digital input SP-Dif optical (8 kHz – 96 kHz Sampling rate)
• 1 x Digital input Coax digital (8 kHz – 96 kHz Sampling rate)
• 1 x Bluetooth port with SP-Dif – TTL (8 kHz – 96 kHz, e.g. for Mos_BTS Bluetooth streaming module)
• Bluetooth extended digital Audio Port (BT+), flexible 8 kHz – 384 kHz synchronous digital input for audio sources with 2 – 16 channels, direct DSP access without jitter, e.g. for MOS BTS-LD4C BT streaming module or extended analog inputs.

DSP part

• 912 MHz, 32-Bit Audio-Port, 64-Bit Core
• Double Precision 56Bit Filter Calculation
• Samplerate 96kHz

control

• 1 x Remote Connector (Analog, for RTC.2 Potentiometer Remote Control)
• 1 x BT+ control port (connection MOS-BT3.0 (app control), RC-Can (CAN bus control), MOS_USB2.0 (programming dongle), BTS-LD4C high-res streaming module, Gladiator controller
• Controllable with pilot tone
• 1 x Remote Out, 1 x Remote In, Auto-Remote at High-level connection
• Connections with MOLEX® connectors.
• Very small construction size with low heat generation, ideally suited for installation behind coverings.

Software

• 3 x 9 band parametric input EQ (de-equalizing), dynamic
• 6 x Input Delay 0 – 3 ms / 0.01 ms (De-Delay)
• 10 x input level controllers digital (signal conditioning)
• Flexible mixer for signal routing, side-mounted, can add and subtract, 10 inputs to 4 x 2 output groups.
• 6 x 30 band or 4 x 30 band + 2 x 15 band group EQ, parametric, relative phase remains stable
• 8 x 10 band output filter
• HighPass / LowPass / HighShelf / LowShelf / Notch / Allpass 1st - 4th Order / Speaker-EQ
• 8(10) x Speaker-Delay 0 – 12 ms, 0.01 ms
• 8 x Speaker Phase switch
• Flexible phase control with calculation tool
• Extensive analysis tools integrated
• B.A.R.N.I.E. Compatible

Technical Data

output power

• Output power at 4 Ohms: 4 x 50 Watts (Channel: 1 - 4) 3-Ohm stable (not bridgeable!)
• Output power at 4 Ohms: 4 x 80 Watts (Channel: 5 + 6 / 9 + 10) 2-Ohm stable / bridgeable
• Output power at 4 Ohms: 4 x 45 Watts + 2 x 210 Watts (bridged channel: 5 + 6 / 9 + 10)
• Line Out: 4 x 2 Vrms Line Out outputs (Channel: 7 + 8) + (Channel 9 + 10)

data

• Input voltage: 2Vrms (LL) - 15 Vrms (HL) by default - 30 Vrms (HL)
• Efficiency above all: > 80 %
• Auto-On (only High Level): Off-BTL
• Dimensions: 150 x 160 x 46 mm
• Weight: 1150 grams