ZAPCO DSP-IV Series - ADSP-Z8 IV-6AT

The ZAPCO  ADSP-Z8 IV-6AT DSP amplifier from the DSP-IV Series, is a high end 8-channel DSP with  built-in 6-channel amplifier. The Zapco  DSP amplifier uses the most advanced ADC and DAC converters for maximum sound quality, achieving an extremely high signal-to-noise ratio of 106-110dB with a dynamic range of -120dB to 140dB. A remote control for controlling the DSP is included in delivery.

A system can only sound as good as its source material, and the DSP-Z8 IV AT Series greatly expands the potential for the best possible source material. The new coaxial and optical inputs accept the digital signal from your head unit or a portable HD player. The DSP-IV AT units also feature a connection for HD Bluetooth streaming (with the optional HD-BT module). An interactive digital connection expands your possibilities even further. The connection accepts the control input from the included remote control, allowing you to change the input source, select your song, adjust the master volume, and even control the output of your system's bass amplifiers.

The new ADSP-Z8 IV-6AT amplifier has 6 amplified channels and 2 RCA outputs, while the ADSP-Z16IV 12-A (with 16-channel DSP) has 12 amplified channels and 4 RCA outputs. As for the graphical user interface, the new expanded menu also features a Mixing Set and an AutoTune function (except for the 12-channel model) if you add the optional tuning microphone.

The software has dropdown menus that allow you to name each output channel to suit your system. The extended menu also offers a Mixing Set and an AutoTune  feature when you add the optional calibrated voting microphone.
The new DSP-Z8 IV AT gives you even more options for input selection. You can have up to 8 input channels, which you can set up instantly by simply selecting 2-channel, 4-channel, 6-channel or 8-channel on the Input page. If you need to sum the channels of a factory system to get a full-range input, just click SUM and the system will do it for you. If your system is more complicated than the standard, you can also go to the Advanced menu and use the Mixing Set to manually assign each channel exactly the amount of input signal that is best suited for your particular audio setup.

From simple to advanced, the Zapco DSP-Z8 IV-AT has it all.

• High End 8-channel DSP with  built-in  6-channel amplifier
• Amplifier power @ 4Ω: 6 x 80 Watt RMS
• Amplifier power at 2Ω: 6 x 120 Watt RMS
• Amplifier power @ 4Ω bridged: 3 x 240 Watt RMS
• Performance: 150 MHz/32 Bit/192 KHz
• DSP processor: Cirrus Logic CS47048
• ADC: Cirrus Logic CS47048 32bit/192KHz
• ADC dynamic range/THD: 108dB/-98dB
• DAC: Cirrus Logic CS8422 24bit/192KHz
• DAC dynamic range/THD: 140 dB/-120 dB
• Low Level (Pre)/Sensitivity: 1-5 VRMS
• High Level (Spk In)/Sensitivity: 2-20 V
• Optical digital input: 24 bit-192 KHz
• Coaxial Digital IN: 24bit-192KHz
• Freq. Frequency response (-3dB): 10 Hz - 22.5 KHz
• S/N ratio only DSP digital input: 110 dBA
• S/N ratio only DSP analog input: 106 dBA
• S/N ratio amplifier + DSP at max.Power: 95 dBA
• THD+N DSP Digital Input only: 0.002%
• THD+N DSP analog input only: 0.005%
• THD+N Gain + DSP Analog Input: 0.07%
• Crosstalk at 1 Khz DSP only: 90 dB
• Crosstalk amplifier + DSP: 45 dB
• F/R EQ: 1-6 channels Gr. & Par./31 Pole
• Effect EQ: 7-8 Channel Gr. & Par./11 Pole
• Mute/Solo: Yes, each channel
• Time adjustment (range/steps): 0/15 ms / 0.02 ms
• Max. Delay (cm/steps): 515 cm / 0.68 cm
• Polarity: 0/180°
• Includes remote control
• HD-BT streaming (with optional HD-BT)
• PC/Display port: USB/6-pin Mini DIN
• Dimensions: 213(W) x 222(L) x 50(H)mm