JBL Club A5055

Beschreibung

With the Club A5055, JBL presents a 5-channel amplifier that stands out with its powerful performance and cleverly combined full-range and subwoofer performance. Whether you want to use the A5055 in 5-channel mode for the perfect all-round sound or in 3-channel mode to specifically amplify your front speakers and subwoofer, this model offers flexibility. Integrated high-pass and low-pass crossovers, a selectable bass boost and a phase switch open up options for fine-tuning the sound. The Club A5055 is also characterized by its compact size and the ability to integrate into almost any system. With the wired RBC remote control, you always have control at hand. Developed with balanced differential inputs, this model also impresses with low noise and low distortion.

Characteristics

Compact size

• The JBL Club A5055 Amplifier has a flat housing and a small footprint so that it fits even in vehicles with limited space.

high and low level inputs

• Thanks to the high and low level inputs, the club can be A5055  connect to both aftermarket and factory car radio systems.

Variable crossover and bass amplification

• Unlike many other amplifiers available at similar prices, the JBL Club A5055  variable electronic crossovers and bass boost circuits that enable precise system tuning and performance.

Low noise and low distortion

• The Club A5055  was designed with balanced differential inputs to ensure low noise and low distortion even at high output levels. This also makes it far less susceptible to line-induced motor noise.

input level control

• When using low-level inputs, this control sets the input sensitivity between 200 mVrms and 2.0 Vrms. When using high-level inputs, this control sets the input sensitivity between 2Vrms and 20Vrms.

Complete on-board protection

• The integrated circuits protect the club A5055  against short circuits, overheating, overvoltage and undervoltage. An LED display shows you when one of these conditions occurs.

phase switch

• This switch switches the input phase to inverted or non-inverted. This is particularly useful for system tuning depending on the chassis type and position in the vehicle.

Wired RBC remote control

• The wired RBC remote control is easy to install and can be mounted from the driver's seat for convenient volume control.

General Specifications

• 5-channel car amplifier
• 50 watts Rms  x 4 + 320 Watt Rms  x 1 at 4 Ohm
• 65 watts Rms  x 4 + 500 Watt Rms  x 1 at 2 Ohm
• 140 watts Rms  x 2 bridged to 4 ohms + 500 watts Rms  x 1 at 2 Ohm
• Variable high- and low-pass filters (32-320 Hz, 12 Db/octave) on the front and rear channels
• Low-pass filter (32-320 Hz, 12 Db/octave) in the subwoofer channel
• Bass boost in the subwoofer channel (0-12db at 45hz)
• Phase switch on the subwoofer channel (0, 180 degrees)
• preamplifier and speaker inputs
• fuse 3x 30a
• Power and ground cables with  20mm² recommended
• Wiring and hardware are not included with the amplifier
• WxHxD=360mm  x 51.3mm  x 180mm 

What's in the box?

• 1 x Club A5055 five-channel amplifier
• 4 x adapters from bare cables to RCA
• 6 x 30A ATO fuses (3 built-in, 3 spare fuses)
• 1 x remote control module for the bass
• 1 x 16.5' remote control cable (RJ-25 connectors on both ends)
• 2 x Self-tapping screws for the remote control (M3 x 15mm)
• 4 x mounting screws (M4 x 53 mm)
• 1 x User Manual

Datenblatt herunterladen