Accuton C173-6-096

Beschreibung

The Accuton C173-6-096 is a 7-inch woofer/midrange driver with high efficiency for 3-way designs. It has a large voice coil with a 55 mm titanium voice coil former for high resolution in the midrange range. Its large, 120 mm neodymium magnet system ensures very low distortion.

Short description:

• 16 cm bass-midrange driver with ceramic membrane. A magnet system with neodymium magnets drives the loudspeaker. The under-hang voice coil remains completely in the magnetic field in linear operation. It has a rear-ventilated voice coil.

Mechanical data

• Total diameter / front panel 173  mm
  
• hole cutout 146  mm
  
• Minimum front panel thickness 6.35 mm
• height 102  mm
• magnet height 49.5  mm
  
• magnet diameter 120  mm
  
• Screw holes for screws according to Din 7984 / Ø 4.50 mm
• Weight (pair) 8.5 Kg

Thiele-Small parameters

• Sensitivity SPL 93 dB
• Resistance (DC) Re 6.77 Ohm
• free-air resonance frequency Fs 50 Hz
  
• Equivalence Volume Vas 16.99 Ltr
  
• Mechanical quality Qms 4.68
  
• Electrical quality Qes 0.24
  
• overall quality Qts 0.22
  
• Effective membrane area Sd 130 cm2
  
• Moving mass Mms 14.4 gr
  
• Compliance Membrane tension Cms 0.7 Mm/N
  
• Mechanical resistance Rms 0.96 Kg*S

Voice coil parameters

• load capacity P 120 watts
  
• impedance 6 ohms
• Linear deflection Xmax +/-5  mm
  
• Voice coil diameter 55  mm
  
• voice coil former material Ti
  
• conductor material Cu
  
• Inductance of the voice coil Le 0.32  mH
  
• force factor Bl 11.4 N/A
  
• drive variant underhung

Housing recommendation Closed

• Vb: 4.1L, -18dB @ 40Hz, F-3dB: 175Hz, Q: 0.50 (clean transient response)
  Vb: 11L, -15dB @ 40Hz, F-3dB: 170Hz, Q: 0.38 (extended bass for active systems)

Enclosure recommendation bass reflex

• Vb: 8L, Fres: 25Hz with passive radiator, -18dB @ 25Hz, Q: 0.38 (optimal A/V alignment)
• Vb: 4.1L, Port diameter: 50mm, Length: 170mm, Fres: 82Hz, F-3dB: 85Hz, Q: 0.50 (typical A/V alignment)
• Vb: 11L, port diameter : 50mm, Length: 150mm, Fres: 53Hz, F-3dB: 55Hz, Q: 0.34 (extended bass)

Frequency response

Notice

: Not suitable for use in vehicles.

• This loudspeaker chassis was specially designed for use in  home and studio applications  developed. For  the uses in  automotive sector we recommend the use of the special automotive series  from Accuton, which is offered by Masori upon request.
• The automotive version (Accuton Carhifi Version) from Accuton meets the strict automotive standards and is specially designed for use in cars and a wide variety of other vehicles. It is resistant to vibrations, weather influences, heat and cold that can occur in an automotive environment. This ensures optimal audio quality and reliability.
• Contact us at Masori for more information about the Carhifi Automotive version of Accuton. We will help  You  happy to help you find the right solution for  Your  requirements in the automotive sector and to provide an optimal sound experience in  your  vehicle.