The Prima APK 130 is an excellent 5-inch front system set from Audison, distinguished by its quality and performance. It is a 2-way system, equipped with an AP 1 tweeter and an AP 5 woofer. Thanks to the included APCX TW crossover, you can optimally adjust the response to your needs. The set impresses with a peak power of 225W and an impedance of 4 ohms. For easy and quick installation, this front system set comes with high-current quick-connect terminals. The Prima APK 130 is therefore an excellent choice if you are looking for a reliable and high-quality audio solution for your vehicle.

TECHNICAL DATA

• Woofer Size 130 mm
• Tweeter Size 26 mm
• Woofer Voice Coil Diameter 32 mm
• Tweeter Voice Coil Diameter 20 mm
• Crossover Type HP @ 3.5 kHz - 6 dB Oct
• Magnet Size Woofer 85 x 40 x 13
• Power Handling - Peak 225 W
• Power Handling - Continuous 75 W
• Impedance 4 Ohm
• Frequency Response 70 - 20k
• Tweeter Level Adjustment +2; 0
• Woofer Cone Diameter 107 mm
• Xmax Woofer 2 mm

ELECTRO-ACOUSTIC FEATURES

• Re Woofer 3.1 Ohm
• Fs Woofer 90 Hz
• Le Woofer mH @ 1 kHz 0.25
• Vas Woofer 4 l
• Mms Woofer 9 g
• Cms Woofer 0.34
• Bxl Woofer 4.6
• Qts Woofer 0.68
• Qms Woofer 8
• Spl Woofer 93 dB

GENERAL

• Weight Woofer 0.65 kg
• Weight Tweeter 0.04 kg

FEATURES

• The AP1 tweeter with a 26 mm diameter diaphragm and a wide surround ensures maximum efficiency and reduced resonance frequency.
• AP 1 tweeter with acoustic lens to compensate and fine-tune anomalies in the vehicle's frequency response in the 10kHz-13kHz range caused by restrictive OEM grilles in critical OEM positions.
• APCX TW is a very compact passive tweeter crossover optimized for OEM integration and features an attenuation switch (0 dB, +2dB) to adjust the response in the vehicle according to different installation conditions.
• Passive crossovers come with OEM integration-compatible quick connectors. The ends, which differ on each of the two poles, eliminate possible connection errors and speed up the required installation time.
• AP 5 woofer with 32 mm pure copper voice coil for high power handling and excellent control of low frequencies.
• AP 5 woofer with water-repellent treated paper cone, whose profile was developed using FEM simulation technology (Finite Element Method) and optimized with the Klippel R&D Scan Vibrometer.
• AP5 woofer with reduced mounting depth for easy installation in OEM mounting locations.
• AP5 woofer with TPU surround (Thermoplastic Polyurethane), featuring the exclusive flat triple-wave profile for maximum excursion linearity.
• AP 5 woofer with compact basket, protected by an abrasion-resistant and scratch-resistant coating; the motor is secured with damping epoxy glue.
• AP 5 woofer with high-current quick-connect terminal with double contact on the positive and negative poles for high flexibility and quick connection. The terminal is equipped with a heat-resistant plastic cover that protects it from accidental short circuits.
• Developed with the KLIPPEL suite.