If you want to replace your factory radio with an aftermarket radio, you should ensure that the original steering wheel remote control functions are retained.

However, it is possible that depending on the vehicle equipment as well as the functionality and software of the retrofit device, certain operating functions may be omitted or replaced by other functions.

Compare the illustrated plugs of the adapter with those in your vehicle and ensure that they fit visually and technically.

Please also check if one of the specified original factory radios was installed in your vehicle.

Before the final assembly, you should check the functions of your vehicle, the vehicle settings, and the steering wheel remote control for functionality to ensure that everything works perfectly.

Note

• CAN Bus
• Connection: 40 Pin Quadlock PSA Connector > Article: 42cx30
• Check dip switch setting for retrofit device
• Vehicles with RD4 / RD45 1-DIN OEM device
• Vehicles without Bosch OEM device
• Vehicles without Magneti Marelli RT3 / RT6 / Harman Becker OEM Navigation with volume control knob
• Vehicles without JBL sound system
• Vehicle settings via steering wheel remote control supported (see user manual)
• Vehicles with ECO mode > +12V permanent power connection terminal 30 battery fused
• Vehicles with PDC at the rear additionally > Article 42cxpdc

Suitable for the following vehicles

• Citroen
• Citroën Berlingo (7) 06/2008 - 03/2012
• Citroën Berlingo (7) 04/2012 - 05/2015
• Citroën Berlingo (7) 06/2015 - 06/2018
• Citroën C2 (J) 12/2004 - 12/2009
• Citroën C3 (F) 10/2005 - 01/2010
• Citroën C3 (S) 01/2010 - 01/2017
• Citroën C4 (L) 11/2004 - 08/2010
• Citroën C5 (D) 10/2004 - 04/2008
• Citroën C8 (E) 01/2008 - 07/2012
• Citroën C8 (E) 07/2012 - 06/2014
• Citroën DS3 (S) 03/2010 - 07/2014
• Citroen Jumpy (X) 02/2007 - 05/2016
• Citroen Nemo (A) 08/2008 - 12/2015
• Citroen Xsara Picasso (C) 03/2004 - 02/2010
• Fiat
• Fiat Scudo (ZAF 270) 02/2007 - 07/2016
• Peugeot
• Peugeot 207 (WC) 06/2006 - 06/2009
• Peugeot 207 (W) 06/2009 - 07/2015
• Peugeot 208 (C) 04/2012 - 04/2015
• Peugeot 307 (3/ 3 Break/ 3 SW/3 CC) 06/2005 - 03/2009
• Peugeot 308 (4/4 GTI/4 SW/4 CC) 09/2007 - 07/2015
• Peugeot 407 (6/6 SW/6 Coupe) 05/2004 - 07/2008
• Peugeot 407 (6/6 SW/6 Coupe) 02/2006 - 03/2011
• Peugeot 807 (E) 07/2002 - 02/2008
• Peugeot 807 (E) 02/2008 - 06/2014
• Peugeot 3008 (oU) 06/2009 - 10/2013
• Peugeot 5008 Van (O) 10/2009 - 10/2013
• Peugeot Bipper (A) 12/2007 - 12/2015
• Peugeot Expert (X) 02/2007 - 08/2016
• Peugeot Partner (7) 05/2008 - 03/2012
• Peugeot RCZ (4J) 04/2010 - 09/2015
• Toyota
• Toyota Proace 03/2013 - 08/2016

The following signals are provided.

• Reimport vehicles or vehicles with differing software may be incompatible in functions.
• rose: +12V ignition terminal 15 1.5A max.
• orange: +12V lighting terminal 58 0.1A max.
• white: +12V reverse signal 1.5A max.
• yellow/green yellow/red: speed signal
• steering wheel remote control
• Vehicle settings supported

Connection cable for the following radio manufacturers

• Multilead diverse devices: 42arc100
• Alpine 3.5mm jack connection: 42arc101
  
• Blaupunkt 2010> 3.5mm jack connection: 42arc107
• Blaupunkt 2010> Key1 / Key2 / (GND) connection: 42arc000
• China HU Key1 / Key2 / (GND) connection: 42arc000
• Clarion 3.5mm jack connection: 42arc104
• Digital Dynamics Single Cable Connection: 42arc108
• ESX Key1 / Key2 Connection: 42arc000
• JVC 3.5mm jack connection: 42arc104
• JVC Single Cable Connection: 42arc105
• Kenwood single cable connection: 42arc105
• Kenwood 2017> 3.5mm jack connection: 42arc107
• Kenwood 2020> Key1 / Key2 / GND connection: 42arc000
• Pioneer 3.5mm jack connection: 42arc107
• Snooper Key1 / Key2 Connection: 42arc000
• Sony 3.5mm jack: 42arc107
• XZent single-cable connection: 42arc108
• Zenec Single Cable Connection: 42arc108

General Installation Instructions

• Connection and connection sequence
• 1: Make settings and configuration of the interface without voltage
• 2: Check configuration of the radio connection cable
• 3: Connect the radio connection cable according to the operating instructions of the retrofit device.
• 4: Connect all other connections according to the operating instructions of the retrofit device.
• 5: Connection of the overall installation to the vehicle with live connection last.
• 6: Configuration of the retrofit device according to the operating instructions of the retrofit device steering wheel remote control/camera/telephone hands-free system/antenna phantom power supply and more
• Changes to the configuration of the interface and the radio connection cable
• 1: Carry out changes without tension
• 2: Connection after change see above 5 and 6
• The connections, connection changes, alternative connections, connections of loose cables, or connection extensions of loose cables specified in the instructions or the operating manual are intended solely for orientation and information for trained professional personnel.
• "Connections, changes to the cable configuration of the wiring harness, or use of alternative connections or connection extensions"
• 1: Connections and modifications are to be carried out exclusively by trained professionals.
• 2: Connections and modifications must be checked for any manufacturer approvals or any manufacturer warranty conditions that may be affected by the modifications before connection.
• 3: Connections and modifications must be checked for functionality and accuracy before connection by measuring and by matching against the vehicle's wiring diagram.
• 4: Connections and changes are made at your own risk without any guarantee of functionality.
• 5: Connections and modifications are made at your own risk without any guarantee against damage to the vehicle, the retrofitting device, or the interface.
• 6: Changes to the pre-assembled wiring harness will void the product warranty.