Vehicle Search
Prima APS 8 R
Technical Highlights
- Peak power 500W, impedance 4 Ohm, Xmax 8.8mm.
- Compact design, high performance, low installation depth.
- Special geometry, optimized cooling, reflex housing.
- More technical details
Availability for pickups could not be loaded.
Shipping cost calculator
Shipping cost calculator
Rob
Max
Unsure if this product fits your car?
We help you – quickly, personally, and without obligation.
Fill out the form and we'll send you a personalised offer
This product is not universally compatible. Send us your vehicle details and we will check fitment for your model free of charge.
Prima APS 8 R by Audison
Audison Prima APS 8 R is an 8-inch (200 mm) Subwoofer with 4 Ohm, 250 W continuous power handling, and 500 W peak power handling. Designed for bass reflex enclosures starting from 8.5 liters with a tuning between 30 and 40 Hz. The special cone dust cap basket geometry allows for high excursion at a low height, supported by venting openings below the spider and a novel cooling circuit. The ultra-flat profile measures 79 mm; the voice coil is 40 mm, Xmax is 8.8 mm, and Xmech is 16.5 mm. The magnet material is High Density Flux Ferrite, and the cone is made of water-repellent, pressed paper; the motor assembly and cone profile are optimized with FEM and Klippel Scan Vibrometer. Includes steel grille and plastic gasket. Designed for bridged operation with Audison AP8.9 bit or AP4.9 bit/AP4 D. Weight is 3.04 kg and dimensions are A 222 mm, B 187 mm, C 94.6 mm, and D 79 mm.
- 8-inch (20 cm) Subwoofer
- Impedance 4 Ohm
- RMS power 250 W
- Peak power 500 W
- Size 200 mm
- Ultra-flat profile 79 mm
- For bass reflex enclosures starting from 8.5 liters
- Tuning 30–40 Hz
- Special cone dust cap basket geometry for high excursion
- Venting openings on the basket below the spider; central bottom venting is omitted
- Novel cooling circuit
- Massive, FEM-optimized motor assembly
- Water-repellent, pressed paper cone; profile optimized with FEM simulation and Klippel
- Mounting close to the rear wall of the enclosure is possible
- Includes steel grille and plastic gasket
- Combination with Audison AP8.9 bit (2 CH bridged) or AP4.9 bit/AP4 D (2 CH bridged)
- Voice coil Ø 40 mm
- Magnet material High Density Flux Ferrite
- Xmax 8.8 mm
- Xmech 16.5 mm
- D 173 mm
- Driver displacement volume 0.67
- Re 3.7 Ohm
- Fs 32 Hz
- Vas 26.5 l
- Mms 80 g
- Cms 0.33 mm/N
- BL 11.5 T·m
- Qms 5.1
- Qes 0.43
- Qts 0.41
- Le 1.45 mH
- Sound pressure level 84 dB
- Weight 3.04 kg
- Dimension A 222 mm
- Dimension B 187 mm
- Dimension C 94.6 mm
- Dimension D 79 mm

