Scanspeak Speakers

Scanspeak Car Audio Speakers in the Carhifi Online Shop Masori buy cheap online

Scanspeak car audio speakers offer an impressive upgrade in car hi-fi for every type of vehicle. Whether you want to upgrade your Audi or VW or enjoy the best sound in a BMW, Mercedes, SEAT, or Opel – with the versatile Scanspeak components, you achieve precise and powerful sound reproduction. Thanks to innovative technologies such as ring radiator tweeters, highly efficient diaphragm materials, and intelligent enclosure designs, outstanding sound is delivered in every car hi-fi system.

Technical highlights for car sound at the highest level

The technical specifications of Scanspeak Car Audio speakers go beyond simple power ratings and ensure a sonorous soundstage:

• High durability (up to 120 watts RMS) for distortion-free playback
• Wide frequency range (30 Hz – 40 kHz) for deep bass and finest highs
• Low distortion factor (THD below 0.5%) for precise music reproduction
• Efficient Magnetic Motors with neodymium or ferrite for precise control of the diaphragm
• Lightweight voice coils (1 inch to 2 inches) for optimal control of the diaphragm stroke

Especially in combination with powerful amplifiers, this interaction enables an unadulterated sound characteristic. For even more individuality, the system can be fine-tuned via DSP (Digital Signal Processor) to perfectly sound every car. Likewise, some models support plug & play integration, making installation in factory mounting locations easier.

Overview of the different Scanspeak series

Scanspeak presents three main series that meet different requirements in the car audio sector. Divided into Discovery, Revelator, and Illuminator, the portfolio covers a wide range. The following table gives you a quick overview of the core features:

For beginners, the Discovery speakers are ideal as they offer a good price-performance ratio. Revelator models are recommended for advanced car audio enthusiasts who value enhanced sound depth. In the top tier, Illuminator drivers provide absolute peak performance in car sound – perfect for audiophiles seeking the highest precision.

Construction details for the best sound inside the car interior

The impressive sound qualities of Scanspeak are based on numerous subtleties in the design:

• Membrane materials: From ultra-stiff Kevlar to specially coated paper membranes for minimal self-resonance.
• Ring radiator technology: Perfect radiation in the treble range and impressive fine detailing of the highs.
• Ventilated pole plates: Lower compression effects and improved heat management at high levels.
• Elaborate spider constructions: Optimized centering of the oscillating system for precise movement sequences.

Thanks to these features, distortions across the entire frequency spectrum remain extremely low, which is especially important at higher volumes in cars. Scanspeak deliberately avoids compromises to deliver a clear and detailed sound image.

Correct Use of Midrange Speakers and Woofers

Those who place great value on full coverage of the midrange should opt for separate midrange drivers (e.g., 3 inch or 4 inch). Combined with a powerful woofer (e.g., 6.5 inch or 8 inch), this results in a seamless sound spectrum. The combination with tweeters ensures that no frequency gaps occur. Profiled mid-bass drivers with a frequency response down to 30 Hz provide a solid bass foundation, which is particularly impressive with electronic music or rock tracks.

Planning and Installation in the Vehicle

An optimal installation is crucial to unleash the full performance potential of your Scanspeak Car Audio speakers. The Installation service in Frankfurt (Oder) offers you professional support. The following points should be considered for efficient installation:

• Carefully choose the installation position in the doors, the A-pillar, or the dashboard
• Door insulation using bitumen mats or Alubutyl for vibration reduction
• Suitable cable cross-section (2.5 mm² or more) to minimize losses
• Ensure correct polarity and proper impedance (typically 4 Ω)
• Use optional crossovers or DSP for precise sound tuning

When mounting, make sure that all brackets are securely attached and free from vibrations. This is especially noticeable at higher sound pressure levels (SPL over 90 dB) where proper fixation is crucial.

DSP support and AI chatbot compatibility

Those who want to play it safe when tuning their Scanspeak system should consider using a Digital Signal Processor. A DSP allows, among other things:

• Precise crossover settings
• Time alignment for precise stereo stage in the vehicle
• Equalizer adjustment to compensate for room acoustics effects

Our Expert Support is happy to assist you in selecting the right DSP solution. Additionally, the AI chatbot provides useful support when it comes to checking the compatibility of various components.

Additional installation components for your sound upgrade

Scanspeak car audio speakers unleash their full potential when all additional components are perfectly matched. Key factors include, among others:

• Suitable amplifiers: An amplifier with sufficient reserves (e.g., 2x100 watts RMS or 4x50 watts RMS) ensures that the speakers do not clip.
• Connection cable: In addition to the correct cross-section, an OFC copper conductor (Oxygen Free Copper) is worthwhile to minimize contact losses.
• Subwoofer Integration: Additional bass power can be achieved with a 10-inch or 12-inch subwoofer. For compact solutions, an 8-inch active subwoofer is recommended.
• Capacitors or auxiliary batteries: At high peak performances, such as with large amplifiers, additional capacitances stabilize the power supply.

You can find all the necessary accessories in the Masori car audio online shop. If you have any questions, we are here to assist you by phone, email, or through our chat, so you always get the right components for your car.

How to Find Your Perfect Scanspeak Component System

To find out which configuration best fits your vehicle, you should consider factors such as available space, desired sound characteristics, and budget. For an older Opel with limited door volume, a 2-way system with a compact mid-bass driver can be the ideal solution. If you drive a Mercedes or BMW with generous installation openings and want more volume, a 3-way component set with a separate midrange driver is worthwhile.

• Plug&Play solutions: Ready-made kits are available especially for newer VW models and some Audi vehicles.
• 3-way upgrades: For absolute sound perfection in sedans or coupes with sufficient space.
• Coaxial speakers: Practical all-in-one solution for quick upgrades in SEAT vehicles.

Use if needed the Expert Support or contact our AI chatbot to determine the correct chassis parameters for your car doors. Information on TSP (Thiele-Small parameters) is also helpful to determine the ideal volume for sealed or vented installation concepts.

Optimal measuring techniques for a perfect sound image

After your new Scanspeak Car Audio speakers are installed, a professional calibration is recommended. Using advanced measurement methods, the frequency response inside the vehicle cabin is analyzed and specifically optimized:

• Calibration of runtimes for optimal stereo effect
• Correction of room modes using parametric equalizers
• Fine-tuning of the crossover frequencies between woofer, midrange, and tweeter

The better the acoustics of your car are taken into account, the more intense the sound experience will be. For particularly precise results, it is worth having the speakers measured with a professional RTA tool (Real Time Analyzer). With high-end Illuminator systems, this can provide the final touch for audiophile soundscapes.

Advantages of Good Door Insulation

Regardless of the vehicle type or the speaker series used, thorough door insulation greatly improves the overall result. To minimize resonances, the following materials are often used:

• Bitumen mats for mass increase
• Alubutyl for reliable vibration damping
• Acoustic foam for absorbing sound reflections

Single-layer insulation material already reduces disturbing ambient noise and increases the efficiency of the speakers. The result is clearer bass reproduction and improved transient response in the low frequencies.

Your path to high-end sound with Scanspeak: Support and installation service

The top tier of the car hi-fi world is reached with a custom mix of Scanspeak components, a suitable amplifier, and well-thought-out vehicle acoustics. Through the professional installation on site in Frankfurt (Oder) we effectively implement your sound ideas. Also use the Support und the AI chatbot to expand or refine your system as needed. Exciting articles about speaker models and system concepts can be found in our Audio Blog, which offers tips and tricks on car audio topics.

Bullet points for a quick overview

• Scanspeak Focus on High-End Sound and Innovative Driver Designs
• Three series (Discovery, Revelator, Illuminator) for different needs
• Proper door insulation brings more peace and precise bass
• DSPs and crossovers enable individual fine-tuning
• Plug&Play offers available for many common car models
• Installation in Frankfurt (Oder) or self-assembly with expert assistance

With Scanspeak car audio speakers, you secure a first-class sound upgrade that takes the interior to new sonic realms. Whether you're specifically looking for more bass power in your Opel or want to enjoy subtle sound nuances in an Audi – Scanspeak systems offer a wide range of possibilities. In the Carhifi online shop Masori, you can buy customized solutions cheaply online and rely on high-quality car audio technology that meets every requirement.