Audison Thesis TH 3.0 II voce

Beschreibung

The Thesis TH 3.0 II voce from Audison is an outstanding 3" (8 cm) midrange speaker that stands out for its optimal clarity in the midrange range. Audison has specially developed this device to offer the human ear maximum sensitivity and selectivity. With a peak power of 110 W, a diameter of 70 mm and an impedance of 4 ohms, this midrange speaker stands out for its extreme linearity, its custom-made N38 H-Grade neodymium magnet and its transparent TPX® Material also stands out for its high quality and sophistication. Since the human ear is sensitive in the mid-range frequency range, the Thesis TH 3.0 II Voce reproduces every sound flawlessly. Choose the Thesis 3.0 II Voce to capture the smallest nuances in your music or verbal communication.

 

TECHNICAL DATA

• size 70 mm
• load capacity - peak 110 W
• Load capacity - continuous operation 55 W
• impedance 4 ohms
• frequency response 110  - 5700 Hz
• Magnet material SPECIAL NEODYMIUM N38H
• voice coil Ø 30.5 mm
• Voice coil material CCAP - COPPER CLAD ALLUMINIUM RIBBON
• woofer Qes 0.52
• Xmax 3.3 mm

ELECTRO-ACOUSTIC PROPERTIES

• D 66.75 mm
• Re 3.4 Ohm
• Fs 100 Hz
• Vas 1.01 l
• Mms 4.3 g
• Cms 0.59 mm/N
• BL 4.2 T•m
• Qms 5.5
• Qts 0.48
• Le Standard 0.18 mH
• Spl 85.6 dB

GENERALLY

• Weight 0.25 kg

DIMENSIONS

• Dimension A 84 mm
• Dimension B 73.5 mm
• Dimension C 45 mm
• Dimension D 37 mm
• Dimension E 89 mm
• dimension F 18

CHARACTERISTICS

• 30.5 mm mobile voice coil made of CCAR (Copper Clad Aluminum Ribbon)
  wound with flat wire to maximize power factor and heat dissipation. 
• Aluminum demodulation ring for linearization of the high deflection
  Intermodulation distortion that cancels out sound coloration.
• Aluminum demodulation ring that linearizes intermodulation distortion at high excursions
  Intermodulation distortion is linearized and sound colorations are eliminated.
  better control of mobile personnel and higher thermal stability. 
• The engine geometry was designed using finite element simulation software to
  to optimize efficiency by concentrating the magnetic field in the gap. 
• membrane made of TPX® , a transparent material that
  Irregularities in the frequency response and offers an insight into the interior of the
  the speaker. 
• Membrane geometry designed with simulation software to achieve
  homogeneous directivity.
• Optimized cone/space resolution with extensive simulations for
  to linearize the frequency response at medium frequencies.
• Basket made from a single piece of die-cast aluminium with four pairs of
  Spokes for maximum stiffness without slowing down airflow. 
• Suspension and spider with very high deflection, optimized with
  Simulations of the multiphysical behavior of the loudspeaker.
• eID technology for the traceability of TH 3.0 II articles from production to
  Purchase.