JL Audio MX600/3

Discover the powerful MX600/3 3-channel amplifier from JL Audio. This amplifier is a compact powerhouse with its highly corrosion-resistant aluminum housing and the ability to deliver a lot of clean sound without putting a strain on the loading system. With 100 watts on two channels and an additional 400 watts for a subwoofer system, the MX600/3 offers an all-in-one solution for your entire audio system - all from a single, ultra-compact chassis. Built-in filters, a variety of input voltage levels, and a robust, powder-coated finish also make this device unique.

• 3-channel system amplifier in Class D, 100 W x 2 + 400 W x 1 @ 2 Ω / 75 W x 2 + 250 W x 1 @ 4 Ω - 14.4V
  
• The MX600/3 3-channel amplifier uses JL's high-speed switching design NexD™ to deliver plenty of clean power without putting a strain on the charging systems.
• Its tiny, cast aluminum housing is highly corrosion-resistant and IPX7 waterproof.
  
• Delivering 75W x 2 into 4 ohms plus 400W for a subwoofer system, the MX600/3 is a great all-in-one solution for driving a complete audio system from a single, ultra-compact chassis.
  
• Integrated filters include a 12 dB/octave high-pass crossover for the main channels and a dedicated 24 dB/octave low-pass crossover for the subwoofer channel.
• Other features include a bass boost EQ, a variable infrasound filter and a polarity switch for the subwoofer output.
• A dual-range input section accepts a variety of input voltage levels, from line level to high-power speaker level signals.
  
• This amplifier features a durable powder-coated finish, a sealed control cover, and stainless steel hardware for long-lasting durability.

• Main channels @ 4 Ω : 75 W RMS x 2
  
• Main channels @ 2 Ω : 100 W RMS x 2
• Main channels - bridged @ 4Ω :200 W RMS x 1
  
• Subwoofer channel @ 4Ω: 250W RMS x 1
  
• Subwoofer channel @ 3Ω: 300W RMS x 1
  
• Subwoofer channel @ 2Ω: 400W RMS x 1
  
• Subwoofer channel @ 1.5 Ω : N/A

• Main channels @ 4 Ω : 50 W RMS x 2
  
• Main channels @ 2 Ω : 80 W RMS x 2
  
• Main Channels - Bridged @ 4Ω : 100 W RMS x 1
  
• Subwoofer channel @ 4Ω: 200W RMS x 1
  
• Subwoofer channel @ 3Ω: 250W RMS x 1
  
• Subwoofer channel @ 2Ω: 300W RMS x 1
  
• Subwoofer channel @ 1.5 Ω : N/A

• Frequency response: 20 Hz - 20 kHz (+0, -1dB)
  
• S/N ratio, based on the highest rated power: >88 dB below the rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping factor @ 4 Ω : >92 / 50 Hz
  
• Damping factor @ 2 Ω : >43 / 50 Hz
  
• THD+N @ rated power (main channels): <1% @ 2 Ω per Ch.
  
• THD+N @ rated power (subwoofer channels):<1% @ 2 Ω per Ch.
  
• Input voltage range @ RCA inputs : switchable from 250 mV - 4 V RMS (low) to 580 mV - 14 V RMS (high)
  
• Minimum cable diameter  : 25mm²
  
• Fuse rating: 60 A (AFS, AGU or MaxiFuse™ )

• Filter slope: 12 dB/octave
  
• Filter frequency range: Channels 1 & 2 (front) 35 Hz - 300 Hz
  
• Filter frequency range: Subwoofer channel: 40 Hz - 400 Hz
  
• Filter mode: Channels 1 & 2 (front) : high pass only
  
• Filter mode: Subwoofer channel: Low pass only
  
• Calibrated filter frequency potentiometer: Yes
  
• Filter defeat function: Yes
  
• Remote control of subwoofer level control : Optional (RBC-1)
• Channel input mode switch : Yes (2/4 channel)
  
• Pass-through preamp output : None

• Height (H) : 1.77 inches / 45 mm
  
• Width (W) : 237 mm (9.33 inches)
  
• Depth (D) : 115 mm (4.50 inches)