JL Audio XDM500/3

The JL Audio XDM500/3 is a 5-channel marine amplifier designed to take your marine audio system to the next level. With its impressive power of up to 500 watts, this amplifier offers the possibility of driving high-quality component speaker systems and a subwoofer system with a powerful 300 watts. Built-in filter systems, stainless steel fittings for durability in marine environments and a compact housing characterize the XDM500/3. With this amplifier you will experience crystal clear sound and maximum performance on your boat.

• 3-Channel Class D Marine System Amplifier, 75 W x 2 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4 V
• This compact amplifier is ideal for a simple audiophile subwoofer/satellite system. The M500/3 lets you drive a pair of high-quality component speaker systems with plenty of clean power, while also providing a powerful 300W to a subwoofer system. The breakthrough that makes so much power possible in such a small package is our NexD switching design™ .
• The M500/3 features a 12 dB/octave high-pass filter for its main channels and a low-pass filter with variable slope for its subwoofer channel. Both filters offer a continuous cutoff frequency selection from 50-500 Hz.
• This marine amplifier features a white and gray powder coat finish, a sealed control cover, and stainless steel hardware for long life in the marine environment.

• Frequency response (main channels) 12 Hz - 22 kHz (+0, -1dB)
• Frequency response (subwoofer channel) 10 Hz - 1 kHz (+0, -1dB)
• Signal-to-noise ratio, based on the highest rated power (main channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Signal-to-noise ratio, based on 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping factor @ 4 Ω >120 / 50 Hz
• Damping factor @ 2 Ω >60 / 50 Hz
• THD+N @ rated power (main channels) <1% @ 2 Ω per channel.
• THD+N @ rated power (subwoofer channels) <1% @ 2 Ω per channel.
• Input voltage range @ RCA inputs 100 mV - 4 V RMS
• minutesCopper Power / Ground Wire Cross Section 4 AWG Wire
• Fuse rating 50 A (AFS, AGU or MaxiFuse™ )

• Main channels @ 4 Ω 75 W RMS x 2
• Main channels @ 2 Ω 100 W RMS x 2
• Main Channels - Bridged @ 4Ω 200 W RMS x 1
• Subwoofer channel @ 4Ω 180W RMS x 1
• Subwoofer channel @ 3Ω 240W RMS x 1
• Subwoofer channel @ 2Ω 300W RMS x 1
• Subwoofer channel @ 1.5 Ω N/A

• Main channels @ 4 Ω 60 W RMS x 2
• Main channels @ 2 Ω 90 W RMS x 2
• Main Channels - Bridged @ 4Ω 180 W RMS x 1
• Subwoofer channel @ 4Ω 180W RMS x 1
• Subwoofer channel @ 3Ω 240W RMS x 1
• Subwoofer channel @ 2Ω 300W RMS x 1
• Subwoofer channel @ 1.5 Ω N/A

• Filter mode(s): Channels 1 & 2 (front) Highpass only
• Filter slope(s): Channels 1 & 2 (front) 12 dB/octave
• Filter frequency range: Channels 1 & 2 (front) 50 Hz - 500 Hz
• Filter mode(s): Channels 3 & 4 (rear) N/A
• Filter slope(s): Channels 3 & 4 (rear) N/A
• Filter Frequency Range: Channels 3 & 4 N/A
• Filter mode(s): Subwoofer channel only low pass
• Filter slope(s): Subwoofer channel 12/24 dB/octave
• Filter frequency range: subwoofer channel 50 Hz - 500 Hz
• Locked, calibrated filter frequency potentiometer Yes
• Filter defeat function Yes
• Infrasound filter: Subwoofer channel none
• Optional remote control (HD-RLC)
• Remote level modes sub-channel or all channels
• Channel input mode switch Yes (2/4 channels)
• pass-through preamplifier output buffered
• Selection of the source channel for PreOuts Yes (1&2/Sum/Sub)

• Height (H) 52 mm
• width (B) 216 mm
• Depth (D) 180 mm
• Net weight: 2.18 kg