ACV-LFB Alfa Romeo ISO CAN Bus/Mini ISO analog-Lenkradfernbedienung-Masori.de

ACV LFB Alfa Romeo ISO CAN Bus/Mini ISO analogue

Steering wheel remote control

99,00€

/Stück

(/)

Inkl. MwSt. Exkl. MwSt. inkl. Versandkosten exkl. Versandkosten

Available, in 4-6 days with you

Vollständige Lieferbedingungen

Günstiger gesehen?

„Wir halten mit - garantiert!" Nutze die Tiefpreisgarantie! Wenn du einen Artikel auf einer Internetseite innerhalb der EU günstiger findest, ziehen wir mit dem Preis der Konkurrenz gleich und legen einen Artikel aus unserem Zubehörsortiment bei.

Die Menge überschreitet den verfügbaren Bestand.
paypal master visa klarna amazon payments scalapay
Beschreibung

    When replacing the factory radio with an aftermarket radio, keep the original steering wheel remote control functions.

    However, depending on the vehicle equipment, range of functions and software of the retrofit device, individual operating functions may be omitted or replaced by other functions.

    Compare the adapter plugs shown with those in your vehicle and make sure that they fit visually and technically.

    Please also check whether one of the specified original factory radios was installed in your vehicle.

    Before final assembly, please check the vehicle functions, the vehicle settings and the steering wheel remote control to ensure they are working properly.

Notice

    • Analog
CAN bus
    • Connection: ISO / Mini ISO connector
    • Vehicles with CAN bus power ISO connector
    • Vehicles with analog steering wheel remote control RC-A/GND/RC-B Mini-ISO connector C2 Pin 10/11/12
    • Vehicles with Blue&Me > Silverbox module must remain installed
    • Vehicles with BOSE OEM sound system*
    • +12V Amp Amplifier Remote > Mini ISO Chamber C1 Pin 6
    • Vehicles without +12V ignition current terminal 15

Suitable for the following vehicles

    • Alfa Romeo 147 (973) 09/2007 - 04/2010
    • Alfa Romeo GT (937) 02/2004 - 10/2010

The following signals are provided

    • Reimported vehicles or vehicles with different software may be functionally incompatible.
    • red: +12V ignition terminal 15
    • orange: +12V lighting terminal 58
    • purple/white: +12V reverse signal
    • green: ground GND handbrake signal
    • Total output load capacity: 100 mA max.
Current requirement greater than 100 mA
    • 1 relay coil resistance 75 Ohm min.
    • 2 relays coil resistance 150 Ohm min.
  • steering wheel remote control
  • *Active system adapter Alfa Romeo/Lancia ISO>ISO > Article: 13-1001-50
  • *Active system adapter various vehicles ISO>ISO > Article: 13-1190-50

Connection cables for the following radio manufacturers

    • LFB cable 42s/acv > Alpine jack: 42ctalpinelead
    • LFB cable 42s/acv > Parrot 4 Pin: 42ctasteroidlead
    • LFB cable 42s/acv > Bosch-Blaupunkt  >2010 Mini ISO: 42ctblaupunktlead
    • LFB cable 42s/acv > Blaupunkt/China HU/Kenwood 3 cable: 42ctchinahulead
    • LFB cable 42s/acv > Clarion jack: 42ctclarionlead
    • LFB cable 42s/acv > JVC 1 cable/jack: 42ctjvclead
    • LFB cable 42s/acv > Kenwood 1 cable: 42ctkenwoodlead
    • LFB cable 42s/acv > Multilead various devices: 42ctmultilead
    • LFB cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead3
    • LFB cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead5
    • LFB cable 42s/acv > Panasonic 1 cable: 42ctpanasoniclead
    • LFB cable 42s/acv > Blaupunkt/Kenwood/Pioneer jack: 42ctpioneerlead
    • LFB cable 42s/acv > Pioneer AVH/DMH/SPH 2022> Jack loose: 42ctpioneerlead2
    • LFB cable 42s/acv > Devices with LFB learning function: 42ctsmartlead
    • LFB cable 42s/acv > Blaupunkt/Kenwood/Sony jack: 42ctsonylead
    • LFB cable 42s/acv > XZent/Zenec 1 cable: 42ctzeneclead