JL Audio XDM1000/5V2

The XDM1000/5V2 is an impressive 5-channel marine amplifier from JL Audio to discover. This high-performance amplifier delivers a sensational 100 watts RMS per channel at 2 ohms. With advanced technologies that maximize audio quality and fidelity, the M1000/5V2 is not just an amplifier, but an all-in-one solution to power a powerful marine audio system. Thanks to its sealed and anti-corrosion design, it is perfectly suited to the demands of the marine environment. Whether you want to drive two high-quality speaker systems or a dual subwoofer system, the XDM1000/5V2 is an unstoppable powerhouse that will not disappoint.

• 5-Channel Class D Marine System Amplifier, 100 W x 4 @ 2 Ω + 600 W x 1 @ 2 Ω - 14.4 V
• Here is the perfect all-in-one solution to drive a powerful 4 speaker + two subwoofer marine audio system. Delivering up to 1000W of clean power, the M1000/5v2 can comfortably drive two pairs of high quality component speaker systems at 75W x 4 @ 4Ω, while also delivering a solid 600W of power to a dual subwoofer system. The breakthrough that makes so much power possible in such a small package is our NexD switching amplifier design™ .
• The M1000/5v2 includes a 12 dB/octave high pass filter for one main channel pair, a 12 dB octave high pass or band pass filter for the other main channel pair, and a low pass filter with variable slope for the subwoofer channel. All three filters offer a continuous cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low pass filter for the subwoofer channel, a band pass filter on channels 3 and 4, and a high pass filter on channels 1 and 2. A "x10" multiplier switch on the high pass filter of Ch. 1 & 2 allows the cutoff frequency to be set from 50-500 Hz or 500-5000 Hz.
• With an additional HD-RLC remote control (sold separately), the subwoofer output level or the amplifier master volume for all channels can be controlled directly from the control station. The M1000/5v2 also features the v2 specification feature set, which consists of an automatic power-on function (via signal sensing or DC offset sensing) and a differentially balanced dual-range input section that can handle a wide range of input voltage levels.
• This amplifier features a white and gray powder coat finish, a sealed control cover, and stainless steel hardware for long life in the marine environment.

• Frequency response (main channels) 12 Hz - 22 kHz (+0, -1dB)
• Frequency response (subwoofer channel) 10 Hz - 1 kHz (+0, -1dB)
• Signal-to-noise ratio, based on the highest rated power (main channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Signal-to-noise ratio, based on 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping factor @ 4 Ω >150 / 50 Hz
• Damping factor @ 2 Ω >75 / 50 Hz
• THD+N @ rated power (main channels) <1% @ 2 Ω per channel.
• THD+N @ rated power (subwoofer channels) <1% @ 2 Ω per channel.
• Input voltage range @ RCA inputs switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V ​​RMS (High)
• minutescopper power / ground wire cross-section  25mm²
• Fuse 80 A (AFS, AGU or MaxiFuse™ )

• Main channels @ 4 Ω 75 W RMS x 4
• Main channels @ 2 Ω 100 W RMS x 4
• Main channels - bridged @ 4Ω 200 W RMS x 2
• Subwoofer channel @ 4Ω 400W RMS x 1
• Subwoofer channel @ 3Ω 500W RMS x 1
• Subwoofer channel @ 2Ω 600W RMS x 1
• Subwoofer channel @ 1.5 Ω N/A

• Main channels @ 4 Ω 60 W RMS x 4
• Main channels @ 2 Ω 90 W RMS x 4
• Main channels - bridged @ 4Ω 180 W RMS x 2
• Subwoofer channel @ 4Ω 360W RMS x 1
• Subwoofer channel @ 3Ω 480W RMS x 1
• Subwoofer channel @ 2Ω 600W RMS x 1
• Subwoofer channel @ 1.5 Ω N/A

• Filter mode(s): Channels 1 & 2 (front) Highpass only
• Filter slope(s): Channels 1 & 2 (front) 12 dB/octave
• Filter frequency range: Channels 1 & 2 (front) 50 Hz - 5 kHz
• Filter mode(s): Channels 3 & 4 (rear) high-pass or band-pass
• Filter slope(s): Channels 3 & 4 (rear) 12 dB/octave
• Filter frequency range: Channels 3 & 4 50 Hz - 500 Hz
• Filter mode(s): Subwoofer channel only low pass
• Filter slope(s): Subwoofer channel 12/24 dB/octave
• Filter frequency range: subwoofer channel 50 Hz - 500 Hz
• Locked, calibrated filter frequency potentiometer Yes
• Filter defeat function Yes
• Infrasound filter: Subwoofer channel none
• Optional remote control (HD-RLC)
• remote level modes sub-channel or all channels
• Channel input mode switch Yes (2/4/6 channels)
• Pass-through preamp output None
• Selecting the source channel for PreOuts N/A

• Height (H) 52 mm
• Width (B) 374 mm
• Depth (D) 180 mm