Vehicle Search
Prime R2-750X5
Technical Highlights
- 700W 5-channel, Class-D, CLEAN setting, RLC level remote control.
- Balanced inputs, variable infrasonic filter, RCA pass-through.
- Fully adjustable switches, short circuit and overcurrent protection.
- More technical details
Availability for pickups could not be loaded.
Shipping cost calculator
Shipping cost calculator
Rob
Max
Unsure if this product fits your car?
We help you – quickly, personally, and without obligation.
Fill out the form and we'll send you a personalised offer
This product is not universally compatible. Send us your vehicle details and we will check fitment for your model free of charge.
Prime R2-750X5 by Rockford Fosgate
The Rockford Fosgate Prime R2-750X5 is a 5-Channel Amplifier in full-range Class-D with an aluminum die-cast heat sink. Equipped with balanced differential inputs, RCA pass-through, and high-level inputs, as well as a 2/4/5-channel input selector switch. Auto-sense bypass for RAP, C.L.E.A.N. setting, and an RLC level remote control are integrated. Fully adjustable 12 dB/octave high-pass and low-pass Butterworth filters, variable infrasonic filter, and a continuously variable on-board punch EQ. Short circuit and overcurrent protection, rollback protection, CEA-2006 and CE compliance, top-mounted control panel, and convection cooling. Frequency response 20 Hz to 20 kHz, operating voltage 9 to 16 VDC, recommended fuse 120 A, and dimensions 4.9 cm x 17.3 cm x 28.5 cm.
- 5-Channel Amplifier
- Full-range Class-D
- Balanced differential inputs with RCA pass-through outputs
- High-level input compatible
- 2/4/5-channel input selector switch
- Auto-sense bypass switch for vehicles with RAP (Retained Accessory Power)
- C.L.E.A.N. setting
- Includes RLC level remote control
- Variable infrasonic filter
- Continuously variable on-board punch EQ
- Front, rear, and sub variable input gain adjustment
- Top-mounted control panel
- Short circuit and overcurrent protection
- Rollback protection
- Fully adjustable 12 dB/octave high-pass and low-pass Butterworth filters
- CEA-2006 compliant
- CE compliant
- Frequency response: 20 Hz - 20 kHz
- RMS power: 50 Watts x 4 + 200 Watts x 1 @ 4 Ω
- RMS power: 100 Watts x 4 + 350 Watts x 1 @ 2 Ω
- RMS power: 200 Watts x 2 @ 4 Ω (Bridged/Mono)
- Dynamic power: 70 Watts x 4 + 241 Watts x 1 @ 4 Ω
- Dynamic power: 114 Watts x 4 + 426 Watts x 1 @ 2 Ω
- Dynamic power: 234 Watts x 2 @ 4 Ω (Bridged/Mono)
- Bridgable: Yes
- Input sensitivity Low-Level: 150 mV - 4 V
- Input sensitivity High-Level: 450 mV - 12 V
- Circuit topology: Class-D
- Signal input Front Low-Level: 2 RCA
- Signal input Front High-Level: 4-Pin Molex
- Signal input Rear Low-Level: 2 RCA
- Signal input Rear High-Level: 4-Pin Molex
- Signal input Sub Low-Level: 2 RCA
- Signal input Sub High-Level: 4-Pin Molex
- Input switch: 2/4/5 inputs (RCA/Hi-Level)
- Sound control: 0 to +18 dB at 45 Hz
- Front high-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth
- Front low-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth
- Rear high-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth
- Rear low-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth
- Sub low-pass: 50 Hz - 250 Hz @ 12 dB/octave Butterworth
- Sub infrasonic: 15 Hz - 40 Hz @ 12 dB/octave Butterworth
- Remote controls: Yes
- Cable diameter: 20 mm²
- Speaker cable diameter: 8 mm²
- Cooling: Convection
- Operating voltage: 9 - 16 VDC
- Recommended fuse: 120 A
- Max. current draw (13.8 V RMS): 71 A
- Dimensions (H x W x D): 4.9 cm x 17.3 cm x 28.5 cm

