If you want to replace your factory radio with an aftermarket radio, you should ensure that the original steering wheel remote control functions are retained.

However, please note that depending on the vehicle equipment, functionality, and software of the retrofit device, certain operating functions may be omitted or replaced by other functions.

Compare the illustrated plugs of the adapter with those in your vehicle and ensure that they fit visually and technically.

Please also check if one of the specified original factory radios was installed in your vehicle.

Before you permanently install the retrofit radio, we recommend that you check the functions of your vehicle, the vehicle settings, and the steering wheel remote control for their functionality to ensure that everything works smoothly.

Note

• Analog
• Connection: ISO / Mini ISO yellow > Mini ISO connector 6 Pin wired
• Vehicles with Tuner List / Update List OEM device with display in the device
• Vehicles without external display
• Vehicles without Carminat device
• Vehicles without Cabasse sound system

Suitable for the following vehicles

• Dacia
• Dacia Duster (SD) 04/2010 - 11/2013*
• Dacia Sandero (SD) 06/2008 - 12/2012*
• Nissan
• Nissan NV400 (X62) 09/2010 - 06/2014
• Nissan NV400 (X62) 07/2014- 07/2020**
• Nissan Primastar (X83) 11/2002 - 09/2006
• Nissan Primastar (X83) 09/2006 - 05/2015**
• Opel
• Opel Movano B (X62) 05/2011 - 05/2019**
• Opel Vivaro A (X83) 01/2001 - 09/2005
• Opel Vivaro A (X83) 09/2006 - 12/2010
• Opel Vivaro A (X83) 09/2011 - 07/2014**
• Renault
• Renault Clio II (B) 09/1998 - 03/2002
• Renault Clio II (B) 07/2001 - 09/2005
• Renault Clio II (B) Campus 09/2005 - 04/2009
• Renault Kangoo I (KC) 01/1998 - 04/2003
• Renault Kangoo I (KC) 04/2003 - 12/2009
• Renault Master II 03/1998 - 09/2002
• Renault Master II (JD) 02/2002 - 02/2010
• Renault Master III (M) 09/2014 - 09/2019**
• Renault Megane I (BA/DA) 03/1999 - 09/2003
• Renault Megane II (CM/EM) 10/2002 - 12/2005
• Renault Trafic II (J/JL) 01/2001 - 10/2006
• Renault Trafic II (I/JL) 10/2005 - 12/2010*
• Renault Trafic II (I/JL) 01/2011 - 08/2014**
• Renault Twingo I (C06) 09/1998 - 09/2003
• Renault Twingo I (C06) 01/2003 - 07/2007
• Renault Twingo II (N) 09/2007 - 12/2011**
• Renault Twingo II (N) 01/2012 - 08/2014**

The following signals are provided.

• steering wheel remote control
• *Vehicles with Blaupunkt 1-DIN OEM device
• **Vehicles with 1-DIN OEM device AUX front/ 1 rotary knob

Connection cable for the following radio manufacturers

• LFB InCartec Cable > Blaupunkt/China HU/Kenwood: 42k-000
• LFB InCartec Cable > Multilead various devices: 42k-025
• LFB InCartec Cable > Alpine: 42k-100
• LFB InCartec Cable > Blaupunkt/Kenwood/Pioneer: 42k-300
• LFB InCartec Cable > XZent/ Zenec: 42k-400
• LFB InCartec Cable > Sony: 42k-600
• LFB InCartec Cable > Kenwood: 42k-700a
• LFB InCartec Cable > Clarion: 42k-800
• LFB InCartec Cable > JVC: 42k-900

General Installation Instructions

• Review
• 1: Review of all operating functions and vehicle adjustment functions of the OEM device
• 2: Carry out the disassembly of the OEM device without voltage.
• 3: Check all interface connections for correctness and continuity without voltage.
• Connection and connection sequence
• 1: Make settings and hardware configuration of the interface without voltage.
• 2: Check the configuration of the radio connection cable
• 3: Connect the radio connection cable according to the operating instructions of the retrofit device.
• 4: Connect all other connections according to the operating instructions of the retrofit device.
• 5: Connection of the complete installation to the vehicle with live connection last.
• 6: Software configuration of the interface according to the instructions in the article text and in the BDA
• 7: Configuration of the retrofit device according to the operating instructions of the retrofit device steering wheel remote control/camera/telephone hands-free system/antenna phantom power supply and more
• 8: Function test steering wheel remote control and vehicle
• Changes to the hardware configuration of the interface and the radio connection cable
• 1: Carry out changes without tension
• 2: Connection after change see above 5 to 8
• In case of malfunction of the interface or the vehicle
• 1: Reversion to the OEM device
• 2: Operate OEM device
• 3: Establish CAN Bus idle
• 4: Review of the hardware configuration of the interface
• 5: Connection to CAN Bus idle see above 5 to 8
• The connections, connection changes, alternative connections, connections of loose cables, or connection extensions of loose cables specified in the instructions or the operating manual are intended solely for orientation and information for trained professional personnel.
• Further connections, changes to the cable configuration of the wiring harness, or use of alternative connections or connection extensions.
• 1: Connections and modifications are to be carried out exclusively by trained professionals.
• 2: Connections and modifications must be checked for any manufacturer approvals or any manufacturer warranty conditions that may be affected by the modifications before connection.
• 3: Connections and modifications must be checked for functionality and accuracy before connection by measuring and by matching against the vehicle's wiring diagram.
• 4: Connections and modifications are made at your own risk without guarantee of functionality.
• 5: Connections and modifications are made at your own risk without any guarantee for damages to the vehicle, the retrofitting device, or the interface.
• 6: Modifications to the pre-assembled wiring harness may result in the expiration of the product's warranty.