Vehicle Search
Thesis TH K2 II A CORO
Technical Highlights
- Peak power 300 W, impedance 4 ohms, sensitivity 87 dB.
- Woofer size 165 mm, tweeter 38 mm, frequency response 40 Hz-26 kHz.
- Woofer voice coil 50 mm, cone material TPX®, Xmax 5.4 mm.
- More technical details
Availability for pickups could not be loaded.
Shipping cost calculator
Shipping cost calculator
Rob
Max
Unsure if this product fits your car?
We help you – quickly, personally, and without obligation.
Fill out the form and we'll send you a personalised offer
This product is not universally compatible. Send us your vehicle details and we will check fitment for your model free of charge.
Thesis TH K2 II A CORO by Audison
Thesis TH K2 II A CORO is a 6.5 inch (16.5 cm) Speaker Set from Audison featuring the TH 1.5 II Violino and TH 6.5 II Sax. Continuous power handling is 150 W, peak power handling is 300 W, impedance is 4 Ohm, sensitivity is 87 dB, and frequency response is 40 Hz to 26 kHz. The 165 mm woofer uses a TPX cone, a 50 mm CCAR flat wire voice coil, low inductance, hi-excursion suspension, and an aluminum die-cast basket with four pairs of spokes. The 38 mm tweeter features a natural silk dome and a single-layer 34 mm CCAW voice coil. Neodymium magnets N48 H-grade in the woofer and N38 H-grade in the tweeter with 1.67 T*m in the gap. Air-Loading System and Violino Tuning System with Bottom Case or Bottom Disk, FEM-optimized geometries and front plate, as well as laser vibrometer-supported optimization. Crossover Type 34 with adjustable crossover cut.
- 6.5 inch (16.5 cm) Speaker Set
- Set components: TH 1.5 II Violino tweeter and TH 6.5 II Sax woofer
- Crossover Type 34
- Adjustable crossover cut in the frequency range
- Woofer cone material TPX
- Tweeter with 38 mm natural silk dome
- Single-layer 34 mm CCAW voice coil tweeter
- 50 mm CCAR flat wire voice coil woofer
- N38 H-grade neodymium magnet tweeter, 1.67 T*m in the magnet gap
- N48 H-grade neodymium magnet woofer
- Air-Loading System
- TH 1.5 II Violino Tuning System with Bottom Case or Bottom Disk
- FEM-optimized front plate and spokes; magnet group geometry FEM-optimized
- Aluminum die-cast basket, one piece, four pairs of spokes
- Low inductance of the woofer voice coil
- Hi-excursion suspension and spider
- Membrane and radiation geometry optimized by simulation
- Sensitivity 87 dB
- Impedance 4 Ohm
- Frequency response 40 Hz - 26 kHz
- Continuous power handling 150 W
- Peak power handling 300 W
- Woofer size 165 mm
- Cone diameter woofer 130 mm
- Tweeter size 38 mm
- Voice coil diameter woofer 50 mm
- Xmax woofer 5.4 mm
- Re woofer 3.8 Ohm
- Fs woofer 55 Hz
- Le woofer 0.43 mH @ 1 kHz
- Vas woofer 8.6 l
- Mms woofer 24.2 g
- Cms woofer 0.35
- Bxl woofer 8.2
- Qts woofer 0.43
- Qms woofer 5.3
- Qes tweeter 0.83
- Spl woofer 87 dB
- Weight woofer 1.25 kg
- Weight tweeter 0.355 kg

