Audison Great APK 130

Beschreibung

The Prima APK 130 is an excellent 5" (13cm) front system set from Audison that impresses with its quality and performance. It is a 2-way system equipped with an AP 1 tweeter and an AP 5 woofer. Thanks to the included APCX TW crossover, you can optimally adapt the response to your needs. The set impresses with a peak power of 225W and an impedance of 4 ohms. For easy and quick installation, this front system set is supplied with high-current quick-connect terminals. The Prima APK 130 is therefore an excellent choice if you are looking for a reliable and high-quality audio solution for your vehicle.

 

TECHNICAL DATA

• Woofer Size 130 mm
• Tweeter Size 26 mm
• Woofer voice coil diameter 32 mm
• Tweeter voice coil diameter 20 mm
• Crossover type HP @ 3.5 kHz - 6 dB Oct
• Magnet size woofer 85 x 40 x 13
• load capacity - peak 225 W
• Load capacity - continuous operation 75 W
• impedance 4 ohms
• frequency response 70  - 20k
• Adjustment Tweeter Level +2; 0
• Woofer Cone Diameter 107 mm
• Xmax Woofer 2 mm

ELECTRO-ACOUSTIC PROPERTIES

• Re Woofer 3.1 Ohm
• Fs Woofer 90 Hz
• Le Woofer mH @ 1 kHz 0.25
• Vas Woofer 4 l
• Mms Woofer 9 g
• Cms Woofer 0.34
• Bxl Woofer 4.6
• Qts Woofer 0.68
• Qms Woofer 8
• Spl Woofer 93 dB

GENERALLY

• Weight Woofer 0.65 kg
• Weight Tweeter 0.04 kg

CHARACTERISTICS

• The AP1 tweeter with a 26 mm diameter membrane and a broadband surround ensures maximum efficiency and a reduced resonance frequency.
• AP 1 tweeter with acoustic lens to compensate and fine-tune anomalies in the vehicle's frequency response in the 10kHz-13kHz range caused by restrictive OEM grilles at critical OEM positions.
• APCX TW is a very compact passive tweeter crossover optimized for OEM integration and features an attenuation switch (0 dB, +2 dB) to adjust the response in the vehicle according to different installation conditions.
• Passive crossovers are supplied with OEM integration compatible quick connectors. The ends, which differ in each of the two poles, eliminate possible connection errors and speed up the required installation time.
• AP 5 woofer with 32 mm pure copper voice coil for high power handling and excellent low frequency control.
• AP 5 woofer with water-repellent treated paper cone, whose profile was developed using FEM simulation technology (finite element method) and optimized with the Klippel R&D Scan Vibrometer.
• AP5 woofers with reduced mounting depth for easy installation in OEM locations.
• AP5 woofer with TPU (thermoplastic polyurethane) surround, with the exclusive, flat triple-wave profile for maximum excursion linearity.
• AP 5 woofer with compact basket, protected by an abrasion and scratch resistant coating, the motor is attached with damping epoxy adhesive.
• AP 5 woofer with high-current quick-connect terminal with double contact on the positive and negative pole for high flexibility and quick connection. The terminal is provided with a temperature-resistant plastic cover that protects it from accidental short circuits.
• Developed with the KLIPPEL suite.