Dayton Audio CX120-8
4" (10cm) coaxial speaker
/Piece
Nur
34,20€
mit 5% Skonto
5% Skonto bei: Vorkasse
Du sparst 5% auf diesen Artikel, indem du beim Bestellvorgang die Zahlungsart Vorkasse (Banküberweisung) wählst Der Rabatt wird automatisch abgezogen!
Günstiger gesehen?
„Wir halten mit - garantiert!" Nutze die Tiefpreisgarantie! Wenn du einen Artikel auf einer Internetseite innerhalb der EU günstiger findest, ziehen wir mit dem Preis der Konkurrenz gleich und legen einen Artikel aus unserem Zubehörsortiment bei.
Beschreibung
Discover the Dayton Audio CX120-8, a full-size 4-inch (10cm) coaxial speaker that features precise bass and extended high frequency response. The CX120-8 features a coaxially mounted 3/4-inch silk dome tweeter and an open cast frame for improved airflow and minimal power compression. With its 4-inch polycone woofer and a rubber half-shell surround, the speaker offers high power handling and a smooth frequency response. Optimized by a rubber surround for reduced midrange breakup, the CX120-8 delivers clear and natural sound.
highlights
- Full-range speaker with precise bass and extended treble range
- Coaxially mounted 3/4" silk dome tweeter
- Open cast frame for improved airflow and minimal power compression
- 4" curved polycone woofer with rubber half-shell surround
Features of the 4" woofer
- 1" voice coil, wound on an aluminum carrier for high power handling
- The curved, linear shaped poly diaphragm offers a good balance between stiffness, low mass and damping, resulting in a natural sounding driver with a smooth frequency response
- Optimized rubber surround for reduced breakup in the midrange
- Attractive, rigid, open cast frame to minimize reflections and resonances and improve airflow
- High-energy ceramic magnet for greater cone control and improved efficiency
- Power handling: 40 watts RMS/80 watts max
- VCdia: 1"
- Le: 0.62 mH
- Impedance: 8 Ohm
- Re: 6.2 Ohm
- Frequency response: 90-5,500 Hz
- Fs: 87.5 Hz
- SPL: 88.5 dB 2.83V/1m
- Vas: 0.10 cu. ft. (2.99 liters)
- Qms: 2.89
- Qes: 0.57
- Qts: 0.48
- Xmax: 3.0 mm
- Dimensions:
- Overall diameter: 4-3/4"
- Cutout diameter: 3-7/8"
- Depth: 2"
3/4" tweeter
- Silk dome ensures richness of detail and clarity of the high frequencies
- Coaxially mounted on the pole piece of the woofer membrane
- Optimized placement and trimmed flanging to reduce phase problems in interaction with the woofer
- Strong neodymium magnet
- Trimmed flared throat to minimize phase issues causing suck-out with woofer
- High-pass filter required (not included)
- Power handling: 20 watts RMS/40 watts max
- VCdia: 3/4"
- Le: 0.04 mH @ 10 kHz
- Impedance: 8 Ohm
- Re: 5.6 Ohm
- Frequency response: 4,500-20,000 Hz
- Fs: 2745 Hz
- SPL: 89.2 dB 2.83V/1m
- Qms: 2.20
- Qes: 7.91
- Qts: 1.72
specifications
- load capacity RMS 40 watt
- load capacity Max 80 watt
- Impedance (Z) 8 Ohm
- Sensitivity 88.5 dB 2.83V/1m
- Frequency response 90 to 20,000 Hz
- voice coil diameter 1"
- DC resistance (Re) 6.22 ohm
- Voice coil induction (Le) 0.63 mH
- resonance frequency (Fs) 87.5 Hz
- Mechanical quality (Qms) 2.89
- Electrical quality (Qes) 0.57
- overall quality (Qts) 0.48
- Moving mass (Mms) 4.82g
- Suspension compliance (Cms) 0.765 mm/N
- Membrane area (Sd) 52.51 cm²
- force factor (BL) 5.08 Tm
- Equivalent volume (Vas) 3.0 liters
- Maximum deflection (Xmax) 3.0 mm
- Membrane material polypropylene
- beading material rubber
- voice coil wire material CCA
- voice coil mold material aluminum
- Basket / frame material Cast Aluminum
- magnetic material ferrite
- outer diameter 12.1cm
- total depth 9.84cm
- cutout diameter 10.95cm
- mounting holes 4
- Closed volume 1.3 liters
- Closed F3 156 Hz
- bass reflex volume 4.1 liters
- bass reflex F3 80 Hz
Dimensions & Housing
Datenblatt herunterladen
