SB Acoustics SB16PFC25-4-COAX
6.5" (16.5cm) coaxial speaker
/Piece
Nur
48,45€
mit 5% Skonto
5% Skonto bei: Vorkasse
Du sparst 5% auf diesen Artikel, indem du beim Bestellvorgang die Zahlungsart Vorkasse (Banküberweisung) wählst Der Rabatt wird automatisch abgezogen!
Günstiger gesehen?
„Wir halten mit - garantiert!" Nutze die Tiefpreisgarantie! Wenn du einen Artikel auf einer Internetseite innerhalb der EU günstiger findest, ziehen wir mit dem Preis der Konkurrenz gleich und legen einen Artikel aus unserem Zubehörsortiment bei.
Beschreibung
The SB Acoustics SB16PFCR25-4-COAX 6.5" (16.5cm) coaxial speaker fiber/paper composite is driven by a powerful ferrite magnet. The resonance frequency of around 40 Hz is far outside the usable range, which means that the driver is extremely linear in the usable range and can be used optimally in the broadband range. The generously ventilated centering spider optimizes the rear compression behavior to a maximum and provides additional cooling. The flattened basket ensures the smallest possible surface area on the baffle, which makes it easier to install the driver in small housings or tight positions in the car.
Features:Â
- Ventilated, reinforced plastic chassis
- Proprietary cone material with natural fibers from our own production
- Soft rubber surround with low damping for improved transient response
- Optimized engine system
- Non-resonant, durable connecting wires
- Compact dome tweeter with large surround
- Frequency range: 75Hz - 20kHz
Woofer dataÂ
- nominal impedance 4 Ω
- DC resistance, Re 3.2 Ω
- Inductance of the voice coil, Le 0.31 mH
- Effective membrane area, Sd 119 cm2
- Diameter of the voice coil 25.4 mm
- Height of the voice coil 14.3 mm
- height of the air gap 5 mm
- Linear coil stroke (pp) 9.3 mm
- Magnetic flux density 1.1 T
- Weight of the magnet 0.36 kg
- net weight 0.95 kg
- Free air resonance, Fs 36 Hz
- Sensitivity (2.83V/1m) 90 dB
- Mechanical Q-factor, Qms 2.6
- Electrical Q factor, Qes 0.35
- overall Q-factor, Qts 0.31
- Moving mass including air, Mms 12.5 g
- force factor, Bl 5.1 Tm
- Equivalent volume, Vas 31.3 liters
- Compliance, Cms 1.56 mm/N
- Mechanical loss, Rms 1.1 kg/s
- Nominal load capacity* 40 W
- * IEC 268-5, T/S parameters measured on retracted drives.
Tweeter data
- nominal impedance 4 Ω
- DC resistance, Re 3.0 Ω
- voice coil diameter 12.4 mm
- Height of the voice coil 1.2 mm
- height of the air gap 1.5 mm
- resonance of free air, Fs 1300 Hz
- Sensitivity (2.83V/1m) 89 dB
- Nominal load capacity* 10 W
- Magnetic flux density 1.05 T
- Weight of the magnet 0.003 kg
- Net weight 0.014 kg
Dimensions
Datenblatt herunterladen
