If you want to replace the OEM radio in your vehicle-specific, CAN Bus controlled vehicle with an aftermarket radio, you will need a specific CAN Bus adapter.

Specific and universal CAN bus adapters convert relevant digital data from the respective vehicle-specific data bus into analog signals. Various signals and comfort functions such as ignition plus, lighting, reverse gear signal, or speed signal are read out and provided in analog form for various retrofitting solutions.

Compare the illustrated plugs of the adapter with those in your vehicle and ensure that they fit both visually and technically.

Please also check if one of the specified original factory radios was installed in your vehicle.

"Before you permanently install the adapter, please check the functions of your vehicle and the vehicle settings to ensure that everything works perfectly. This can help prevent any potential problems from the outset."

Note

• CAN-Bus
• Connection: ISO / Mini ISO / 10 Pin ISO Mercedes
• Connection: OEM Antenna ISO(m) > DIN(m)
• Vehicles Mercedes with Audio 5 / Audio 10 1-DIN OEM device
• Vehicles Mercedes with Audio 30 APS 1-DIN OEM Navigation
• Vehicles VW Crafter with RCD 2001 1-DIN OEM device
• 'Vehicles Mercedes / VW with radio preparation > Check connection and pin assignment before installation with OEM device:*'
• Vehicles with differing comfort interior CAN bus connection:
• brown-red twisted: CAN high
• brown twisted: CAN low
• CAN Bus and CAN Bus Distributor Threshold Strip
• CAN Bus and Climate Control
• CAN Bus in Mini ISO connector: Pin 1 Can low / Pin 2 Can high
• CAN Bus in 8 Pin ISO Power Connector: Pin 7 CAN High / Pin 6 CAN Low
• CAN Bus in 18 Pin AMP Connector: Pin 8 CAN low / Pin 9 CAN high / not Robert-Bosch CAN
• OEM devices with ISO block connection
• ISO Extension Speaker 10cm > Item: 1322-02
• Vehicles with 10 Pin ISO / ISO speaker connector OEM sound system without D2B OEM sound system:
• Active system adapter various vehicles ISO>ISO > Article: 13-1190-50

Suitable for the following vehicles

• Mercedes A-Class (W169) 10/2004 - 04/2012
• Mercedes A-Class (C169) 11/2004 - 07/2011
• Mercedes B-Class (T245) 06/2005 - 06/2011
• Mercedes C-Class (W203) 03/2000 - 01/2005
• Mercedes CLK-Class (C208) 07/1999 - 03/2003
• Mercedes CLK-Class (C209) 03/2002 - 05/2005
• Mercedes E-Class (W210) 06/1999 - 12/2002
• Mercedes SL-Class (R230) 08/2001 - 02/2006
• Mercedes SLR (C199) 13/2003 - 12/2009
• Mercedes Sprinter (W906) 04/2006 - 08/2013
• Mercedes Sprinter (W906) 08/2013 - 05/2018
• Mercedes Vito/Viano (W639) 07/2003 - 08/2010
• Mercedes Vito/Viano (W639) 07/2003 - 08/2010
• Mercedes Vito/Viano (W639) 09/2010 - 03/2014
  
• VW
• VW Crafter I (2EC/2EK/2F) 03/2006 - 07/2011
• VW Crafter I (2EC/2EK/2F) 07/2011 - 11/2016
• VW
• VW Crafter I (2EC/2EK/2F) 03/2006 - 07/2011
• VW Crafter I (2EC/2EK/2F) 07/2011 - 11/2016

The following signals are provided.

• Reimport vehicles or vehicles with differing software may be incompatible in functions.
• pink: +12V ignition terminal 15 1.5A max.
• orange: +12V lighting terminal 58 0.1A max.
• white: +12V reverse signal 1.5A max.
• yellow/green yellow/red: speed signal

General Installation Instructions

• The connections, connection changes, alternative connections, connections of loose cables, or connection extensions of loose cables specified in the instructions or the operating manual are intended solely for orientation and information for trained professional personnel.
• "Connections, changes to the cable configuration of the wiring harness, or use of alternative connections or connection extensions"
• 1: Connections and modifications are to be carried out exclusively by trained professionals.
• 2: Connections and modifications must be checked for any manufacturer approvals or any manufacturer warranty conditions that may be affected by the modifications before connection.
• 3: Connections and modifications must be checked for functionality and accuracy before connection by measuring and by matching against the vehicle's wiring diagram.
• 4: Connections and changes are made at your own risk without any guarantee of functionality.
• 5: Connections and modifications are made at your own risk without any guarantee against damage to the vehicle, the retrofit device, or the interface.
• 6: Changes to the pre-assembled wiring harness will void the product warranty.