Discover the Prima APK 165 Ohm2 from Audison, a 6.5 inch (16.5cm) front system set that holds an important place in car audio equipment due to its features. As a kit with 300W peak power, it offers a versatile solution thanks to its configurable 2-way 2 Ohm setup. Notably, the two crossovers allow for easy installation and optimally adjust the frequency response to your needs. An excellent addition for improved sound quality in your vehicle.

TECHNICAL DATA

• Woofer size 165 mm
• Tweeter size 26 mm
• Woofer voice coil diameter 25 mm
• Tweeter voice coil diameter 20 mm
• Crossover type Cut Off @ 4.5 / 5 kHz
• Woofer magnet size 85 x 32 x 15
• Power handling - Peak 300 W
• Power handling - Continuous 100 W
• Impedance 2 Ohm
• Frequency response 50 - 20k
• Crossover Cut Off @ 4.5 / 5 kHz
• Tweeter level adjustment +2; 0
• Woofer cone diameter 127 mm
• Woofer Xmax 2.8 mm

ELECTRO-ACOUSTIC FEATURES

• Re Woofer 2.1 Ohm
• Fs Woofer 75 Hz
• Le Woofer mH @ 1 kHz 0.15
• Vas Woofer 8.5 l
• Mms Woofer 10.5 g
• Cms Woofer 0.4
• Bxl Woofer 3.8
• Qts Woofer 0.63
• Qms Woofer 4.8
• Spl Woofer 95 dB

GENERAL

• Weight Woofer 0.78 kg
• Weight Tweeter 0.04 kg

FEATURES

• 2 Ω impedance to fully exploit the 65 W per channel power at 2 Ω of the AP8.9-bit amplifier.
• 75 Hz resonance frequency to extend the frequency range down to low frequencies of 50 Hz and increase sound pressure level in the lower range.
• Mobile 25-mm voice coil to maximize efficiency at 95 dB.
• Mobile voice coil with 10 mm winding height to increase maximum linear excursion to 2.8 mm and minimize distortion even at high volumes.
• APCX WF 2Ω woofer crossover with low-loss voice coils that shape the frequency response for optimal tuning with the tweeter.
• APCX TW 2Ω tweeter crossover with Hi-Contour function to boost high frequencies for the right sound balance with rich low frequencies guaranteed by the woofer.
• AP 1 tweeter with an acoustic lens that balances the frequency response in the 10kHz to 13kHz range to optimize the product’s acoustic radiation in critical OEM positions where product performance is affected by the presence of the factory grille.
• Connection cable integrated into the passive crossover with Fast-on connectors matching OEM integration. The different connectors on each of the two poles eliminate possible connection errors, speed up installation, and ensure long-term safety.
• AP 6.5 2Ω woofer with water-repellent treated paper cone, whose profile was developed with FEM simulation technology and optimized with Klippel Scan Vibrometer.
• Woofer with reduced mounting depth to facilitate installation in OEM mounting locations.
• Woofer with TPU surround (thermoplastic polyurethane) and unique "Triple Wave" profile for maximum linearity of excursion.
• Woofer with compact basket protected by an abrasion-resistant and scratch-resistant coating. Damping epoxy glue ensures perfect coupling with the motor system.
• Woofer with a high-current quick-connect terminal with double contact on the positive and negative poles for high flexibility and quick connection. The terminal is equipped with a heat-resistant plastic cover that protects it from accidental short circuits.
• Developed with the KLIPPEL suite.