Wähle dein Fahrzeug

Vehicle Search

24 Inch Subwoofer

0 Products

No products found
Use fewer filters or remove all

Jump to product grid

Buy affordable 24 inch subwoofers online at Masori

If you're looking for an oversized subwoofer for your car audio system, the 24 inch models from DD Audio at the Masori car audio online shop are the perfect solution. These XXL woofers offer an enormous cone area and deliver impressively powerful bass in your car. Thanks to the massive chassis with a sturdy basket edge and strong magnet, low frequencies are reproduced cleanly, providing an impressive sound foundation. Especially in sedans or sports cars, you can achieve a unique bass upgrade that meets even the highest performance demands. Another advantage: The subwoofers are available in different impedance versions, so they can be optimally combined with various car audio amplifiers.

Strong performance data and impressive application areas

The DD Audio 24" subwoofers are interesting for those who demand particularly high RMS values and also operate in the professional sector. Thanks to the large diaphragm diameter, enormous levels can be generated without compromising the sound quality. Typical features of these mega subwoofers are:

  • RMS power handling up to 2000 watts and more
  • Dual or single voice coils with 2 ohm or 4 ohm impedance
  • Large voice coil diameters, e.g. 4" for extreme excursion
  • High-quality ferrite magnets or neodymium systems
  • Stable aluminum spiders and reinforced diaphragm suspensions

Typical application areas include various vehicle types such as Audi, VW, BMW, Mercedes, SEAT, or Opel. Plug & play solutions can also be realized with the appropriate adapters if the installation depth and the TSP (Thiele-Small parameters) of the 24" subwoofer fit the vehicle concept. This creates powerful car audio systems that impress both in everyday use and at sound-off events.

Important installation features for optimal sound results

Anyone who wants to install a 24-inch subwoofer in their car should consider some technical points to fully exploit the potential. Particularly relevant are:

  1. Enclosure selection: The type and volume of the enclosure (sealed, ported, or bandpass) influence the bass characteristics. A sealed enclosure offers precise bass, while a ported design produces more output.
  2. Amplifier control: A monoblock amplifier with high output power and matching impedance is recommended. The amplifier should be stable at low ohm values and have sufficient reserves.
  3. Signal control: With suitable active filters and crossovers, playback can be optimized. This ensures that only the frequency range in which the subwoofer excels is amplified.
  4. Clean wiring: Thick power cables (e.g., 0–4 AWG) and high-quality RCA cables are essential for stable power supply and interference-free audio signals.

For maximum safety and best performance, professional installation is recommended. Masori offers this in Frankfurt (Oder) with a Installation service that professionally carries out the installation and perfectly coordinates all components.

Technical data at a glance

The table below shows some typical values that can occur in various 24" subwoofer models from DD Audio or comparable manufacturers. They help to choose the right parameters for your own car audio project.

Model RMS power Max. power Impedance Sensitivity (dB) Mounting depth (mm) Frequency range (Hz)
DD Audio 24-1 1500 W 3000 W 2 × 2 Ohm 90 dB 330 20–200
DD Audio 24-2 2000 W 4000 W 2 × 1 Ohm 88 dB 340 18–180
DD Audio 24-3 2500 W 5000 W 4 Ohm 92 dB 355 15–150

The values listed here may vary slightly depending on the model. Interested parties can view the full parameters on the manufacturer's pages or in the Masori car audio online shop.

Useful accessories for 24-inch subwoofers

Integrating a gigantic 24" subwoofer into the car audio system often requires special accessories and additional components. These include:

  • Amplifiers with high RMS values and low load stability
  • Power caps (capacitors) to stabilize the power supply
  • Additional batteries or powerful alternators
  • Stable enclosure construction materials (MDF, multiplex, fiberglass reinforcements)
  • Possibly damping materials like Alubutyl to minimize resonance

If you're unsure which accessories are suitable, you can always contact the expert support at Masori. There, a free FAQ & help-section as well as a practical AI chatbot that checks product compatibility with the respective vehicle.

Choosing the right variant for your own vehicle

Whether sealed, partially open, or bandpass design: every enclosure type influences the final sound. A large enclosure is usually unavoidable for 24 inches. Therefore, you should check the space in the trunk before purchase or even have a special box made. The question of the right amplifier is also important:

  • Mono amplifier: Ideal if only a single 24" subwoofer is powered.
  • Multichannel amplifier: Useful when powering multiple speakers; however, the bridge function for power boost must be suitable.
  • Load-stable amplifiers: Powerful amplifiers are indispensable at 1-ohm or 2-ohm impedance.

For users who prefer plug & play components, DD Audio also offers modules with pre-assembled cable sets to simplify installation. If you're unsure whether the chosen subwoofer will fit in the available space of an Opel, VW, or other make, you can request dimensions and installation instructions from Masori support in advance.

Care, maintenance, and long-term operation

To ensure the powerful 24-inch subwoofer maintains its peak performance for a long time, some care is advisable. In very dusty environments, it is recommended to occasionally wipe the diaphragm carefully and keep the magnet gap free of dirt particles. Those who demand maximum sound over hours should ensure sufficient cooling, for example through ventilation openings in the enclosure. In addition, correct amplifier settings are important to avoid clipping. This protects both the subwoofer coil and the amplifier from damage. In case of problems or questions, the installation service in Frankfurt (Oder) is a reliable address for diagnosis and repair.

Expert advice and individual solutions

For specific questions about integrating a 24-inch woofer into an existing car audio setup, car owners can rely on professional advice. Masori helps not only through phone and digital support, but also with detailed guides and product descriptions. In addition, the AI chatbot reveals in real time whether the desired model is technically compatible with the existing radio or amplifier. This way, music fans can find exactly the car sound solution that perfectly fits their vehicle and listening habits. DD Audio 24" subwoofers are also the first choice for high-end ambitions, as they deliver enormous deep bass and, thanks to their high-quality construction, can be used in numerous installation variants.

Wie wähle ich den passenden 24' Subwoofer für mein Fahrzeug aus?

Die Auswahl des richtigen Subwoofers hängt von verschiedenen Faktoren ab, die dein Fahrzeug und deine Soundvorlieben berücksichtigen. Zunächst solltest du den verfügbaren Platz im Fahrzeug und den Typ des Gehäuses, das du verwenden möchtest (geschlossen, portiert oder bandpass), in Betracht ziehen. Dies beeinflusst die Bauart des Subwoofers, die du wählen solltest. Ein weiteres entscheidendes Kriterium sind die technischen Spezifikationen: Achte auf die RMS-Leistung und die Impedanz des Subwoofers. Die DD Audio Subwoofer bieten z.B. eine RMS-Leistung von bis zu 1000 Watt und eine Impedanz von 2 Ohm, was für kraftvolle Bässe sorgt. Wenn du einen Subwoofer mit dualen Schwingspulen erwägst, sind das Flexibilität bei der Verkabelung und Anpassung an verschiedene Verstärker zusätzliche Pluspunkte. Insgesamt hängt die Wahl stark davon ab, ob du eine präzise Basswiedergabe oder mehr Lautstärke bevorzugst. Eine Markenwahl wie DD Audio sichert dir hohe Verarbeitungsqualität und innovative Technologie, die deine Erwartungen übertreffen kann.

Wie beeinflussen verschiedene Gehäusetypen die Bassqualität eines 24' Subwoofers?

Das Gehäusedesign ist ein zentraler Faktor für die Klangqualität und die Bassresponse deines Subwoofers. Ein geschlossenes Gehäuse bietet präzisen Bass und schnelle Reaktionszeiten, ideal für Musik mit komplexen Basslinien. Im Vergleich dazu ermöglicht ein portiertes Gehäuse einen tieferen und voluminöseren Bass, indem es die Effizienz bei spezifischen Frequenzen steigert. Dieses Design eignet sich hervorragend, wenn du den Bass richtig spüren möchtest. Ein Bandpass-Gehäuse kombiniert die Vorzüge beider Designs und bietet Flexibilität bei der Frequenzwiedergabe, was für ein breites Spektrum an Anwendungen nützlich ist. Beachte bei der Auswahl des Gehäuses auch die Innenmaterialien: Gedämmte Gehäuse reduzieren unerwünschte Vibrationen und Resonanzen, was zu einer saubereren Basswiedergabe führt. Achte darauf, dass das Gehäuse zu den Spezifikationen deines DD Audio Subwoofers passt, um die bestmögliche Performance zu erzielen. Wenn du Unsicherheiten hast, könnte die Beratung durch einen Carhifi-Experten oder der Einbauservice von Masori hilfreich sein.

Your benefits at Masori