100 WATT RMS

JL Audio MHD900/5-24V

5-channel amplifier

1.969,00€

/Stück

(/)

Inkl. MwSt. Exkl. MwSt. inkl. Versandkosten exkl. Versandkosten

skonto Nur 1.870,55€ mit  5% Skonto 5% Skonto bei: Vorkasse

Du sparst 5% auf diesen Artikel, indem du beim Bestellvorgang die Zahlungsart Vorkasse (Banküberweisung) wählst Der Rabatt wird automatisch abgezogen!

Available, in 3-5 days with you

Vollständige Lieferbedingungen

Günstiger gesehen?

„Wir halten mit - garantiert!" Nutze die Tiefpreisgarantie! Wenn du einen Artikel auf einer Internetseite innerhalb der EU günstiger findest, ziehen wir mit dem Preis der Konkurrenz gleich und legen einen Artikel aus unserem Zubehörsortiment bei.

Die Menge überschreitet den verfügbaren Bestand.
paypal master visa klarna amazon payments scalapay
Beschreibung

    The MHD900/5-24V is a 5-channel marine amplifier produced by JL Audio, a renowned manufacturer in the audio segment. This amplifier was specially developed for 24 V systems and is known above all for its outstanding audio performance and long service life. At the same time, the MHD900/5-24V offers the possibility of functioning as a compact "one-box solution", which makes it ideal for installations with limited space. With its four main channels and the additional subwoofer channel, this JL Audio amplifier delivers an impressive total output of 900 watts.

_msttexthash="144339" _msthash="2" overview

Only for 24 V systems
    5-Channel Class D Marine System Amplifier, 100W x 4 + 500W x 1
  • Thanks to its ability to act as a "one-box solution", the MHD900/5-24V is ideal for installations where space is at a premium and sound quality is paramount.
  • Although this amazing amplifier is extremely compact, it can comfortably drive a complete high-performance marine audio system: that is, four satellite speaker systems and a subwoofer system... with a very serious 900 watts of power!
  • Featuring our single-cycle control switching design and RIPS technology, the MHD900/5-24V delivers 100W x 4 to its four main channels, plus a very powerful 500W to its subwoofer channel. RIPS allows high power to be delivered over a wide range of load impedances, while tight power supply regulation keeps distortion low and maximizes sound quality.
  • This marine amplifier features a white and gray powder coat finish, a sealed control cover, and stainless steel hardware for long life in the marine environment.
  • This amplifier is designed to operate in containers with 24 volt negative grounded electrical systems. Using this product in containers with positive ground and/or voltages other than 24 volts may cause damage to the product and will void the warranty.

service description

    • Frequency response (main channels) 12 Hz - 28 kHz (+0, -1dB)
    • Frequency response (subwoofer channel) 12 Hz - 10 kHz (+0, -1dB)
    • Signal-to-noise ratio, based on the highest rated power (main channels) >108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    • Signal-to-noise ratio, based on 1 W (main channels) >88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    • Damping factor @ 4 Ω >400 / 50 Hz
    • Damping factor @ 2 Ω >200 / 50 Hz
    • THD+N @ rated power (main channels) <0.03% @ 4 Ω
    • THD+N @ rated power (subwoofer channel) <0.05% @ 4 Ω
    • Input voltage range @ RCA inputs switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V ​​RMS (High)
    • minutesCopper Power / Ground Wire Gauge Accepts up to 4 AWG wires
    • Fuse rating 30 A (AFS, AGU or MaxiFuseâ„¢ )

Rated continuous power (RMS) @ 28.8 V

    • Main channels @ 4 Ω 100 W RMS x 4
    • Main channels @ 3 Ω 75 W RMS x 4
    • Main channels @ 2 Ω 75 W RMS x 4
    • Main channels @ 1.5 Ω 75 W RMS x 4
    • Main Channels - Bridged @ 8 Ω 200 W RMS x 2
    • Main Channels - Bridged @ 4 Ω 150 W RMS x 2
    • Subwoofer channel @ 4Ω 500W RMS x 1
    • Subwoofer channel @ 3Ω 500W RMS x 1
    • Subwoofer channel @ 2Ω 500W RMS x 1
    • Subwoofer channel @ 1.5Ω 500W RMS x 1

Rated continuous power (RMS) @ 25 V

    • Main channels @ 4 Ω 100 W RMS x 4
    • Main channels @ 3 Ω 75 W RMS x 4
    • Main channels @ 2 Ω 75 W RMS x 4
    • Main channels @ 1.5 Ω 75 W RMS x 4
    • Main Channels - Bridged @ 8 Ω 200 W RMS x 2
    • Main Channels - Bridged @ 4 Ω 150 W RMS x 2
    • Subwoofer channel @ 4Ω 500W RMS x 1
    • Subwoofer channel @ 3Ω 500W RMS x 1
    • Subwoofer channel @ 2Ω 500W RMS x 1
    • Subwoofer channel @ 1.5Ω 500W RMS x 1

signal processing

    • Filter mode(s): Channels 1 & 2 (front) Highpass only
    • Filter slope(s): Channels 1 & 2 (front) 12/24 dB/octave
    • Filter frequency range: Channels 1 & 2 (front) 50 Hz - 500 Hz
    • Filter mode(s): Channels 3 & 4 (rear) Highpass only
    • Filter slope(s): Channels 3 & 4 (rear) 12/24 dB/octave
    • Filter frequency range: Channels 3 & 4 50 Hz - 500 Hz
    • Filter mode(s): Subwoofer channel only low pass
    • Filter slope(s): Subwoofer channel 12/24 dB/octave
    • Filter frequency range: subwoofer channel 50 Hz - 500 Hz
    • Locked, calibrated filter frequency potentiometer Yes
    • Filter defeat function Yes
    • Infrasound filter: subwoofer channel 30 Hz, switchable
    • Optional remote control (HD-RLC)
    • Remote Level Modes Sub-Channel Only
    • Channel input mode switch Yes (2/4/6 channels)
    • Pass-through preamp output None
    • Selecting the source channel for PreOuts N/A

Dimensions

    Lineart Top-View and Side-View of MHD900/5 Amplifier with Height (H), Width (W) and Depth (D) dimension labels

    • Height (H) 49 mm
    • Width (B) 273 mm
    • Depth (D) 199 mm
    • net weight 3.11 kg