Mosconi PICO 8|10 DSP V2

The Mosconi PICO 8|10 DSP V2 is an 8-Channel DSP Amplifier from Gladen. The amplifier delivers 4 x 50 Watts at 4 Ohms (Channels 1–4, stable at 3 Ohms, not bridgeable) as well as 4 x 80 Watts at 4 Ohms (Channels 5 + 6 / 9 + 10, stable at 2 Ohms, bridgeable); additionally, it provides 4 x 45 Watts + 2 x 210 Watts in bridged operation for Channels 5 + 6 / 9 + 10. Eight switchable analog inputs (High-/Low-Level, Class SB compatible, 2–30 V) are complemented by an optical SP-Dif, a coaxial digital input, a Bluetooth port with SP-Dif – TTL, and a BT+ digital port (8–384 kHz, 2–16 channels). The DSP operates at 912 MHz, 32-Bit audio port and 64-Bit core, double precision 56-Bit filter calculation, and 96 kHz sample rate. Converterless high-speed PWM amplifiers with a carrier frequency > 2 MHz modulate directly from the 96 kHz TDM signal; THD + N ~ 0.02 % at 1 W and efficiency > 80 %. All connections are on one side; a magnetic housing cover with adjustment switches and a USB-C interface for DSP configuration are integrated. Control and connection options include Remote In/Out, Auto-Remote for high-level connection, and MOLEX connectors. Dimensions 150 x 160 x 46 mm, weight 1150 g, compact size with low heat generation.

• 8-Channel DSP Amplifier
• All connections on one side
• Magnetic housing cover with adjustment switches
• 8 x switchable analog inputs (High-Level / Low-Level), Class SB compatible, 2–30 V
• 1 x optical SP-Dif, 1 x coax digital, 1 x Bluetooth port with SP-Dif – TTL (8–96 kHz)
• Bluetooth extended digital audio port (BT+), 8–384 kHz, 2–16 channels, synchronous digital input, direct DSP access
• USB-C connection for DSP settings
• High-speed PWM amplifiers, converterless, carrier frequency > 2 MHz
• MOLEX connectors
• Auto-Remote for high-level connection
• Compact size, low heat generation

• Output power at 4 Ohms: 4 x 50 Watts (Channel 1–4), stable at 3 Ohms, not bridgeable
• Output power at 4 Ohms: 4 x 80 Watts (Channel 5 + 6 / 9 + 10), stable at 2 Ohms, bridgeable
• Output power at 4 Ohms: 4 x 45 Watts + 2 x 210 Watts (bridged Channel 5 + 6 / 9 + 10)
• Line Out: 4 x 2 Vrms (Channels 7 + 8 and 9 + 10)
• Analog inputs: 8 x switchable High-/Low-Level, Class SB compatible, 2–30 V
• Digital input: 1 x optical SP-Dif (8–96 kHz)
• Digital input: 1 x coax digital (8–96 kHz)
• Bluetooth port: SP-Dif – TTL (8–96 kHz)
• BT+ digital port: 8–384 kHz, 2–16 channels, synchronous, direct DSP access without jitter
• DSP: 912 MHz, 32-Bit audio port, 64-Bit core
• Filter calculation: double precision 56 Bit
• Sample rate: 96 kHz
• 1 x remote connector (analog, for RTC.2 potentiometer remote control)
• 1 x BT+ control port (connection MOS-BT3.0 (app control), RC-Can (CAN bus control), MOS_USB2.0 (programming dongle), BTS-LD4C high-res streaming module, Gladiator controller)
• Controllable with pilot tone
• 1 x remote out, 1 x remote in
• Amplifiers: converterless high-speed PWM, carrier frequency > 2 MHz
• Modulation: without DAC directly from the 96 kHz TDM signal of the DSP
• THD + N: ~ 0.02 % at 1 W
• Efficiency: > 80 %
• Software: 3 x 9-band parametric input EQ (de-equalizing), dynamic
• Software: 6 x input delay 0–3 ms, step size 0.01 ms
• Software: 10 x input level adjuster digital (signal conditioning)
• Software: flexible mixer for signal routing, can sum and subtract, 10 inputs to 4 x 2 output groups
• Software: 6 x 30-band or 4 x 30-band + 2 x 15-band group EQ, parametric, relative phase stable
• Software: 8 x 10-band output filters
• Filter types: HighPass, LowPass, HighShelf, LowShelf, Notch, Allpass 1st–4th order, Speaker EQ
• Speaker delay: 8(10) x 0–12 ms, step size 0.01 ms
• Speaker phase: 8 x phase switch
• Phase control: flexible with calculation tool
• Analysis tools: extensively integrated
• B.A.R.N.I.E.: compatible
• Auto-On: Off-BTL (only high level)
• Input voltage: 2 Vrms (LL) – 15 Vrms (HL) by default – 30 Vrms (HL)
• Dimensions: 150 x 160 x 46 mm
• Weight: 1150 g