Germany (€)
Mosconi PICO 6|8 DSP V2
Technical Highlights
- Provides 4 x 50 watts + 2 x 80 watts of power for flexible systems.
- Highly efficient PWM power amplifiers with carrier frequency over 2 MHz.
- Digital inputs SP-Dif and BT+ support modern audio sources.
- More technical details
Availability for pickups could not be loaded.
Shipping cost calculator
Pay in instalments
Pay in 12 interest-free installments of €57,71 with Klarna.
This product is not universally compatible. Send us your vehicle details and we will check fitment for your model free of charge.
Mosconi PICO 6|8 DSP V2 is a 6-Channel DSP Amplifier from Gladen with converterless high-speed PWM output stages and a carrier frequency of over 2 MHz. The modulation occurs without a DAC directly from the 48 kHz TDM signal of the DSP, THD+N ~ 0.02 % at 1 W. Optimized for use with factory radios with six analog inputs up to 30 V, flexible routing, and 3 x input EQ and delay. Output power: 4 x 50 watts (channels 1–4) and 2 x 80 watts (channels 5–6). Two digital inputs (optical SP-Dif and coax), a Bluetooth port with SP-Dif TTL, and a BT+ extended digital audio port. Two processed line-out outputs. DSP section with 912 MHz, 32-bit audio port, 64-bit core, double precision 56 bit, and 96 kHz sample rate. Control via remote connector, BT+ control port, remote in/out, and auto-remote for high-level connection; MOLEX connectors, compact dimensions of 150 x 160 x 46 mm, weight 1150 g, and efficiency over 80 %.
- 6-Channel DSP Amplifier
- Manufacturer: Gladen
- Converterless high-speed PWM output stages with carrier frequency > 2 MHz
- Modulation without DAC directly from 48 kHz TDM signal
- Optimized for use with factory radios
- Flexible routing, 3 x input EQ and delay
- 2 x processed line-out outputs
- 1 x remote connector (analog, for RTC.2 potentiometer remote control)
- 1 x BT+ control port for MOS-BT3.0, RC-Can, MOS_USB2.0, BTS-LD4C, Gladiator Controller
- Controllable with pilot tone
- 1 x remote out, 1 x remote in, auto-remote for high-level connection
- MOLEX connectors
- Very small size with low heat generation
- 8 x analog inputs, switchable high-level/low-level, Class SB compatible, 2–30 V
- 1 x optical SP-Dif, 8–96 kHz sample rate
- 1 x coax digital, 8–96 kHz sample rate
- 1 x Bluetooth port with SP-Dif – TTL, 8–96 kHz
- Bluetooth extended digital audio port (BT+), 8–384 kHz, 2–16 channels, synchronous digital input, direct DSP access without jitter
- DSP: 912 MHz, 32-bit audio port, 64-bit core
- Double precision 56 bit filter calculation
- Sample rate: 96 kHz
- 3 x 9 band parametric input EQ, dynamic
- 6 x input delay 0–3 ms, step size 0.01 ms
- 10 x digital input level adjusters
- Flexible mixer: side-separated, summing and subtracting, 10 inputs to 4 x 2 output groups
- 6 x 30 band or 4 x 30 band + 2 x 15 band group EQ
- 8 x 10 band output filters
- Filter types: HighPass, LowPass, HighShelf, LowShelf, Notch, Allpass 1st–4th order, Speaker EQ
- 8 (10) x speaker delay 0–12 ms, step size 0.01 ms
- 8 x speaker phase switches
- Flexible phase control with calculation tool
- Integrated analysis tools
- B.A.R.N.I.E. compatible
- THD+N ~ 0.02 % at 1 W
- Output power at 4 Ohm (channels 1–4): 4 x 50 watts, 3-Ohm stable, not bridgeable
- Output power at 4 Ohm (channels 5–6): 2 x 80 watts, 2-Ohm stable, bridgeable
- Output power at 4 Ohm (channels 1–4, alternative configuration): 4 x 45 watts
- Output power at 4 Ohm (bridged channel 5+6): 1 x 210 watts
- Line out: 2 x 2 Vrms
- Input voltage: 2 Vrms (low level) – 15 Vrms (high level) standard, up to 30 Vrms (high level)
- Overall efficiency: > 80 %
- Auto-On (only high level): Off-BTL
- Dimensions: 150 x 160 x 46 mm
- Weight: 1150 g
