SIP Ultra 2.1 - 8x(50x33cm)
Insulation
/8 piece
Nur
75,05€
mit 5% Skonto
5% Skonto bei: Vorkasse
Du sparst 5% auf diesen Artikel, indem du beim Bestellvorgang die Zahlungsart Vorkasse (Banküberweisung) wählst Der Rabatt wird automatisch abgezogen!
Günstiger gesehen?
„Wir halten mit - garantiert!" Nutze die Tiefpreisgarantie! Wenn du einen Artikel auf einer Internetseite innerhalb der EU günstiger findest, ziehen wir mit dem Preis der Konkurrenz gleich und legen einen Artikel aus unserem Zubehörsortiment bei.
Beschreibung
- 2.1mm thick, highly rigid aluminum butyric package
- Consisting of
- Application areas: doors, roof, engine bulkhead, wheel arches, trunk, bonnet
- Sufficient for insulating 2 doors.
- Material thickness: 2.1mm
- Mechanical loss factor: >0.22
- Pack size: 1.32 m²
- Package content: 8 mats
- Mat size: 500 x 330 mm
- Sheet metal parts such as door panels, vehicle roofs, vehicle floors, air ducts…
- Plastic parts such as trim parts in the vehicle
- PC case
- any kind of machinery
- Closing and sealing the inside of the door or other openings
- Forms of water protection via loudspeakers in the door area
- Fixation and shaping during filling work
The Ultra 2.1 - 8x (50x33cm) from SIP, a specialist in the field of insulation, is an innovative solution in the form of a composite material. This consists of a solid aluminum foil and a self-adhesive damping layer based on butyl rubber. The material is easy to shape and impresses with excellent sound deadening and damping properties while being lightweight. In addition, the solid aluminum foil provides a stiffening and stabilizing effect. The Ultra 2.1 can be used in a variety of ways, for example in vehicle parts, PC cases and machines. Be excited about this great solution that can make a decisive difference in your construction and renovation projects.
characteristics
8 plates
-
with the dimensions (500mm x 330mm x 2.1mm)
Data
The application areas of SIP Ultra21
The main areas of application for Ultra2.1 are where a vibration-damping or noise-dampening function is desired.
Also suitable for
Due to its extreme adhesive properties and temperature resistance, the Ultra2.1 can be used overhead without any problems, even in multiple layers.
The processing instructions for SIP Alubutyl
Press Ultra2.1 firmly onto the entire surface without any air pockets, preferably with a
Pressure roller. The adhesive strength depends crucially on the contact pressure.
Surface must be free of grease, wax and dust.
It should not be installed below +15°C.
Be careful when processing, the edges are very sharp.
