Art:

• Full active 2 channel speaker level line output converter.
• Unique on the market and an absolute top seller from JL Audio!

Features:

• Fully active two-channel speaker level line output converter with automatic power on.
  
• Designed by JL Audio Sr. engineer Bruce Macmillan, the LoC-22 is a two-channel active processor designed for applications requiring the conversion of factory audio signals for use with aftermarket amplifiers and signal processors.
  
• The LoC-22 uses a fully regulated, switching MOSFET power supply and an all-analog circuit design to provide flat frequency response at any signal level (3 Hz - 32 kHz, +0, -1dB) without altering bass response at high levels, as is the case with many passive line output converters.
  
• Designed to combat induced cable noise, the LoC-22 features a differential input architecture that makes it compatible with virtually any analog audio signal.
• The LoC-22 can handle up to 40 V RMS per channel (equivalent to 400 W into 4 ohms) and easily handles the most powerful factory amplifier outputs.
• A built-in dual-range input load switch allows compatibility with most factory amplifiers that use impedance sensing to mute channels.
  
• Ideal for full-range or low-frequency applications, the LoC-22 is equipped with a pair of line-level RCA analog output jacks (up to 8 V RMS) for feeding audio signals into your aftermarket system. The analog outputs are compatible with most types of aftermarket signal processors or amplifiers.
• Adjusting output levels is super simple and easy thanks to a specially calibrated, built-in clipping meter that works with test tones or music.
• The LoC-22 offers two automatic power-up methods (DC offset detection or signal detection) and provides a positive 12V power-up output for activating aftermarket amplifiers or other downstream electronics.

General Specifications:

• Power supply type : Switching, MOSFET PWM, Regulated.
  
• Operating voltage : 9 - 16 V DC
  
• Standby current consumption : <1.6 mA
  
• Operating current consumption: 0.13 A at 13.8 V
  
• Frequency response : 3 Hz - 32 kHz (+0 dB, -1dB)
  
• S/N ratio at 2V RMS : gain at min: 118 dB gain at max: 103 dB (20 kHz bandwidth)
  
• Remote output capacity : 100 mA (maximum)
  
• Recommended fuse value : 1 A
  
• Recommended fuse type : Fast acting, ATO/ATC or similar
  
• Input channels : Two
  
• Input type : Differential-balanced
  
• Input voltage : 40V RMS per channel (maximum)
  
• Input impedance : Normal: 20kΩ
• Turn-on threshold : Signal detection : 5 mV On/3.5 mV Off at 1 kHz (left input) DC offset: 4.5 V
  
• Output channels : Two
  
• Analog output : unbalanced, stereo RCA jacks
  
• Max. Unbalanced output 8V RMS
  
• Output impedance : 450 Ω
  
• Gain range : -27.3 dB (full CCW) to +3.2 dB (full CW)
  THD+N 0.01% at 2V RMS (1kHz)

Physical specifications:

• Height (H) : 1.23 in / 31 mm
  
• Width (W): 120 mm (4.72 in)
  
• Depth (D) : 3.04 in / 77 mm
  
• Net weight : 2.58 lb / 1.17 kg