Art:

  • 12" TW3 flat subwoofer with 400W and dual 8 ohms.

Features:

  • Built on JL's core TW5 thin-line subwoofer technology, the TW3s offer a powerful combination of shallow mounting depth and high excursion. They are even capable of greater excursion than the W3v3 subwoofers.
  • To enable this remarkable performance, JL Audio's patented thin-line woofer technology compresses the TW3's architecture through a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a full-ring spider while allowing the large motor structure to be placed further forward in the speaker than conventional designs.
  • The TW3s are optimized for small enclosures and feature JL's tab mounting design to maximize the cone area within their mounting surface.
  • Very small mounting depth (3.50 inches)
  • Very small sealed enclosure volume requirements
  • Very long linear excursion (0.60 in / 15.2 mm, one-way linear excursion)
  • DMA-optimized motor designs
  • Cast alloy frame
  • Injection molded mica filled polypropylene diaphragm
  • Rubber surround
  • Aluminum alloy dust cap and rear cover with JL Audio logo
  • Precision-manufactured in the USA at the JL Audio factory in Miramar, Florida, using global components

    General Specifications:

    Power Chart for 12TW3 Subwoofer with ideal Power Range of 100 - 400 W

    • Continuous power handling (RMS) : 400 W
    • Recommended amplifier power (RMS) : 200 - 400 W
    • Rated impedance (Znom) : Dual 8 Ω

    Physical Specifications:

    Lineart Bottom-View and Side-View of 12TW3 Subwoofer with dimension labels A-E

    • Nominal diameter : 12 in / 300 mm
    • Overall diameter (A) : A1: 335 mm / 13.2 in.
    • Minimum A2 : 318 mm / 12.5 in.
    • Mounting diameter (B) : 295 mm / 11.625 in.
    • Bolt circle diameter (C) : 318 mm / 12.5 inch
    • Engine outside diameter (D) : 156 mm / 6.125 inch
    • Installation depth (E) : 89 mm (3.5 in.)
    • Volume Displacement : 0.029 cu ft / 0.82 L
    • Net weight : 14.9 lb / 6.8 kg

    Parameters:

    • Free Air Resonant Frequency (Fs) : 32,660 Hz.
    • Electrical "Q" (Qes) : 0.558
    • Mechanical "Q" (Qms) : 10.071
    • Total quality "Q" (Qts) : 0.668
    • Equivalent volume (Vas) : 1.205 cu ft / 34.12 L
    • One-way linear excursion (Xmax) : 0.6 in / 15.2 mm
    • Efficiency (1 W / 1 m) : 84.23 dB SPL
    • diaphragm area (Sd) : 0.0539 square meter
    • DC resistance (Re) : 14,800 Ω

    Enclosed cabinet specifications:

    Lineart diagram of empty enclosure for 13TW5 with Height (H), Width (W) and Depth (D) dimension labels

    • Wall thickness: 19 mm / 0.75 in.
    • Front baffle thickness : 19 mm / 0.75 in.
    • Volume (Net Int.) : 1.00 cu ft / 28.3 L
    • Outer Width (W) : 635 mm / 25 in.
    • Outer Height (H) : 422 mm / 16.625 in.
    • Outer Depth (D) : 6.5 inches / 165 mm
    • F3 : 38.27 Hz
    • Fc : 48.50 Hz
    • Qtc : 0.9919

    Bass reflex enclosure specifications:

    Lineart diagram of empty thin ported enclosure with physical specification labels

    • Wall thickness: 19 mm / 0.75 in.
    • Front baffle thickness : 19 mm / 0.75 in.
    • Volume (Net Int.) : 1.3 cu ft / 36.8 L
    • Outer Width (W): 864 mm / 34 in.
    • Outer height (H): 432 mm (17 in.)
    • Outer depth (D): 171 mm / 6.75 in.
    • Internal slot port width (SW): 133 mm / 5.25 in.
    • Internal slot port height (SH): 60 mm / 2.375 in.
    • Internal slot port length (SL): 610 mm (24 in.)
    • Port extension length (EL) : 560 mm (22.0625 in / 560 mm)
    • Tuning frequency (Fb) : 29.79 Hz
    • F3 : 32 Hz
    Rated 5/5 based on 28 customer reviews
    Benedikt Golla - by , Feb 07, 2021

    12TW3-D8

    JL Audio 12TW3-D8 12" (30cm) Subwoofer
    JL Audio 12TW3-D8 12" (30cm) Subwoofer
    JL Audio 12TW3-D8 12" (30cm) Subwoofer
    JL Audio 12TW3-D8 12" (30cm) Subwoofer
    JL Audio 12TW3-D8 12" (30cm) Subwoofer
    JL Audio 12TW3-D8 12" (30cm) Subwoofer
    JL Audio 12TW3-D8 12" (30cm) Subwoofer
    JL Audio 12TW3-D8 12" (30cm) Subwoofer

    12TW3-D8

    ✅ EMPFOHLEN

    JL Audio

    Regular price €515,00

    inkl. MwSt., zzgl. Versand

    Art:

    • 12" TW3 flat subwoofer with 400W and dual 8 ohms.

    Features:

    • Built on JL's core TW5 thin-line subwoofer technology, the TW3s offer a powerful combination of shallow mounting depth and high excursion. They are even capable of greater excursion than the W3v3 subwoofers.
    • To enable this remarkable performance, JL Audio's patented thin-line woofer technology compresses the TW3's architecture through a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a full-ring spider while allowing the large motor structure to be placed further forward in the speaker than conventional designs.
    • The TW3s are optimized for small enclosures and feature JL's tab mounting design to maximize the cone area within their mounting surface.
    • Very small mounting depth (3.50 inches)
    • Very small sealed enclosure volume requirements
    • Very long linear excursion (0.60 in / 15.2 mm, one-way linear excursion)
    • DMA-optimized motor designs
    • Cast alloy frame
    • Injection molded mica filled polypropylene diaphragm
    • Rubber surround
    • Aluminum alloy dust cap and rear cover with JL Audio logo
    • Precision-manufactured in the USA at the JL Audio factory in Miramar, Florida, using global components

      General Specifications:

      Power Chart for 12TW3 Subwoofer with ideal Power Range of 100 - 400 W

      • Continuous power handling (RMS) : 400 W
      • Recommended amplifier power (RMS) : 200 - 400 W
      • Rated impedance (Znom) : Dual 8 Ω

      Physical Specifications:

      Lineart Bottom-View and Side-View of 12TW3 Subwoofer with dimension labels A-E

      • Nominal diameter : 12 in / 300 mm
      • Overall diameter (A) : A1: 335 mm / 13.2 in.
      • Minimum A2 : 318 mm / 12.5 in.
      • Mounting diameter (B) : 295 mm / 11.625 in.
      • Bolt circle diameter (C) : 318 mm / 12.5 inch
      • Engine outside diameter (D) : 156 mm / 6.125 inch
      • Installation depth (E) : 89 mm (3.5 in.)
      • Volume Displacement : 0.029 cu ft / 0.82 L
      • Net weight : 14.9 lb / 6.8 kg

      Parameters:

      • Free Air Resonant Frequency (Fs) : 32,660 Hz.
      • Electrical "Q" (Qes) : 0.558
      • Mechanical "Q" (Qms) : 10.071
      • Total quality "Q" (Qts) : 0.668
      • Equivalent volume (Vas) : 1.205 cu ft / 34.12 L
      • One-way linear excursion (Xmax) : 0.6 in / 15.2 mm
      • Efficiency (1 W / 1 m) : 84.23 dB SPL
      • diaphragm area (Sd) : 0.0539 square meter
      • DC resistance (Re) : 14,800 Ω

      Enclosed cabinet specifications:

      Lineart diagram of empty enclosure for 13TW5 with Height (H), Width (W) and Depth (D) dimension labels

      • Wall thickness: 19 mm / 0.75 in.
      • Front baffle thickness : 19 mm / 0.75 in.
      • Volume (Net Int.) : 1.00 cu ft / 28.3 L
      • Outer Width (W) : 635 mm / 25 in.
      • Outer Height (H) : 422 mm / 16.625 in.
      • Outer Depth (D) : 6.5 inches / 165 mm
      • F3 : 38.27 Hz
      • Fc : 48.50 Hz
      • Qtc : 0.9919

      Bass reflex enclosure specifications:

      Lineart diagram of empty thin ported enclosure with physical specification labels

      • Wall thickness: 19 mm / 0.75 in.
      • Front baffle thickness : 19 mm / 0.75 in.
      • Volume (Net Int.) : 1.3 cu ft / 36.8 L
      • Outer Width (W): 864 mm / 34 in.
      • Outer height (H): 432 mm (17 in.)
      • Outer depth (D): 171 mm / 6.75 in.
      • Internal slot port width (SW): 133 mm / 5.25 in.
      • Internal slot port height (SH): 60 mm / 2.375 in.
      • Internal slot port length (SL): 610 mm (24 in.)
      • Port extension length (EL) : 560 mm (22.0625 in / 560 mm)
      • Tuning frequency (Fb) : 29.79 Hz
      • F3 : 32 Hz

      Regular price €515,00

      inkl. MwSt., zzgl. Versand

      1 piece
      5% discount at: Payment in advance, PayPal
      Lieferzeit 1-3 Tage