Electronics for the Carhifi

There are sound processors and signal processors that help to adjust the active speakers using a computer or an app. The aim is to highest sound quality to reach. High-Low Adapter are necessary to pick up the radio signal and simultaneously transmit it to the new amplifiers. Various high-low adapters are available in our range. The task is also to prevent cable noise. The popular high-low adapter "Loc-22" , was developed for full range and low frequency applications. The isolation relay is responsible for isolating the additional battery from the starter battery. This is relevant when the engine is not running. To measure clipping, frequency response or amplifier performance, take a look at our measuring devices The electronics section contains numerous electronics segments, such as the aforementioned sound processor, signal processor, DSP (digital signal processor) and the crossover. .

Audio System DSP 8.12

The Audio System DSP 8.12, for example, is a 12-channel avalanche sound processor that has eight individual and 12 output channels and controls them perfectly. DSP is simply a processor or computer that processes certain signals, in this case music. The DSP influences the audio signal during playback and is able to adapt the sounds to the acoustic conditions. The DSP amplifier combines the DSP with an amplifier as an all-in-one unit and allows the speakers to be operated directly with the device without using additional external amplifiers.

crossover

Why a crossover is needed? Wherever loudspeakers are used, a crossover is also essential, if it is not already present in an amplifier or is actively separated by a DSP. The task of the crossover is to regulate every device that emits sounds with the signals that the speaker can process; in other words: low frequencies are also only available to the so-called woofers The woofer, as the name suggests, produces the low tones. The frequency range is between 30 and 600 Hz, only after that does the midrange speakers in action. Basses obviously need more energy and more air. The crossover is a must when different speakers with different pitches are in use. The combination of these different frequency ranges and the appropriate sound distribution can only be achieved with a corresponding crossover. The so-called passive speaker sets always have a crossover on board.

batteries and isolation relays

The high-energy lithium batteries from Ultimatron , can also be used with the specially developed battery isolation relays from Stinger Elektrconics install.

Which manufacturers does Masori distribute?

In the electronics section you can currently find products from the following brands at Masori: ARC Audio, Audio System, Awave, B2 Audio, CS-Batteries, DD Audio, Deaf Bonce, ESX, Expert Electronics, FOR-X,Ground Zero, Hifonics, JuBaTec, LIONTRON, MiniDSP, Musway, Optima Batteries , Panther Batteries, Power Cell, Pride, Rockford Fosgate, SMD, Sounddigital, SPL Lab, STEG, Stetsom, Stinger, SuperB, Ultimatron and Yinlong.

Conclusion

The topic of audio for cars always fundamentally includes the field of electronics. The crossover regulates the high and low tones. Digital sound processors optimally adapt the amplifier output to the speaker requirements.Lithium batteries ensure the additional power requirement. The isolation relays reliably separate the additional battery from the starter battery. High-low adapters enable retrofit amplifiers to be connected directly to the original radio.

Electronics for the Carhifi

There are sound processors and signal processors that help to adjust the active speakers using a computer or an app. The aim is to highest sound quality to reach. High-Low Adapter are necessary to pick up the radio signal and simultaneously transmit it to the new amplifiers. Various high-low adapters are available in our range. The task is also to prevent cable noise. The popular high-low adapter "Loc-22" , was developed for full range and low frequency applications. The isolation relay is responsible for isolating the additional battery from the starter battery. This is relevant when the engine is not running. To measure clipping, frequency response or amplifier performance, take a look at our measuring devices The electronics section contains numerous electronics segments, such as the aforementioned sound processor, signal processor, DSP (digital signal processor) and the crossover. .

Audio System DSP 8.12

The Audio System DSP 8.12, for example, is a 12-channel avalanche sound processor that has eight individual and 12 output channels and controls them perfectly. DSP is simply a processor or computer that processes certain signals, in this case music. The DSP influences the audio signal during playback and is able to adapt the sounds to the acoustic conditions. The DSP amplifier combines the DSP with an amplifier as an all-in-one unit and allows the speakers to be operated directly with the device without using additional external amplifiers.

crossover

Why a crossover is needed? Wherever loudspeakers are used, a crossover is also essential, if it is not already present in an amplifier or is actively separated by a DSP. The task of the crossover is to regulate every device that emits sounds with the signals that the speaker can process; in other words: low frequencies are also only available to the so-called woofers The woofer, as the name suggests, produces the low tones. The frequency range is between 30 and 600 Hz, only after that does the midrange speakers in action. Basses obviously need more energy and more air. The crossover is a must when different speakers with different pitches are in use. The combination of these different frequency ranges and the appropriate sound distribution can only be achieved with a corresponding crossover. The so-called passive speaker sets always have a crossover on board.

batteries and isolation relays

The high-energy lithium batteries from Ultimatron , can also be used with the specially developed battery isolation relays from Stinger Elektrconics install.

Which manufacturers does Masori distribute?

In the electronics section you can currently find products from the following brands at Masori: ARC Audio, Audio System, Awave, B2 Audio, CS-Batteries, DD Audio, Deaf Bonce, ESX, Expert Electronics, FOR-X,Ground Zero, Hifonics, JuBaTec, LIONTRON, MiniDSP, Musway, Optima Batteries , Panther Batteries, Power Cell, Pride, Rockford Fosgate, SMD, Sounddigital, SPL Lab, STEG, Stetsom, Stinger, SuperB, Ultimatron and Yinlong.

Conclusion

The topic of audio for cars always fundamentally includes the field of electronics. The crossover regulates the high and low tones. Digital sound processors optimally adapt the amplifier output to the speaker requirements.Lithium batteries ensure the additional power requirement. The isolation relays reliably separate the additional battery from the starter battery. High-low adapters enable retrofit amplifiers to be connected directly to the original radio.