miniDSP Harmony DSP 8x12 Dirac Live

The all-digital miniDSP Harmony DSP 8x12 DSP amplifier features a six-channel digital audio input via USB, an optical stereo input (TOSLINK), Dirac Live® acoustic correction and 12 output channels.

Hardware features specifically tailored to the vehicle environment include an on-board isolated power supply, remote trigger input/output and a wired remote control with OLED display for the dashboard or console. Flexible output configurations provide for a variety of system configurations: Each output can be a 40-watt power amplifier or a line-level output to drive external amplifiers. In addition, each output pair can be configured in parallel BTL mode for 80 W power to 2 Ω loads.

In addition to Dirac Live, the Harmony DSP 8x12 includes miniDSP's powerful, easy-to-use audio processing: parametric EQs, compressors, adjustable time delay, crossovers up to 48 dB/octave and an advanced matrix mixer with rear/center function. Four complete processing configurations are stored in flash memory and can be recalled with a wired or infrared remote control.

• 12-channel digital signal processor incl. 12-channel amplifier
• Max. Output level : 4.5 V
• Dirac Live Acoustic Correction
  
• RCA inputs: 6
• RCA outputs: 12
• Analog (High/Low) 
• digital (SPDIF) inputs
• 400MHz 32bit Sharc floating point processor, up to 192kHz processing
  
• 32bit DAC/ADC chipsets
  
• THD+N 0.0007%, 115dB SNR
  
• Digital and analog inputs (low/high level), 12 analog outputs
  
• Flexible DSP processing blocks, rear fill processing (L-R, L+R..) thanks to
• internal matrix
  
• Fully differential, balanced inputs
  
• Optional Dirac Live Upgrade (Read here for more info)
  
• Windows/Mac compatible GUI
  
• Remote control for preset/master/sub volume control included!

• Digital signal processor
  
• 400 MHz,
• 32-bit floating point SHARC digital signal processor (ADSP21489)
• Internal sampling rate: 48 kHz.
• Control Driverless USB 2.0 control interface for control from Windows or Mac
• Digital audio inputs
  
• USB audio, up to 6 channels at 44.1 or 48 kHz
• TOSLINK stereo audio, 44.1 to 192 kHz
• A2B® Multichannel Audio (future option via firmware upgrade)
• Digital audio outputs A2B® multichannel for connecting amplifiers (future option via firmware upgrade)
• Output power
• 12 x 40 W RMS (4 Ω load, BTL mode)
• 6 x 80 W RMS (2 Ω load, PBTL mode)
• THD+N < 0,03 % (f = 1 kHz, 30 mW bis 40 W, 4 Ω-Last, BTL-Modus)
• SNR >107 dB (f = 1 kHz, A-weighted, 40 W at 4 Ω)
• Frequency response: 20 Hz - 20 kHz ± 0.5 dB
• Übersprechen: < -80 dB (1 kHz)
• Analog output mode
• Selectable analog output mode from the plug-in:
• BTL mode for the control of over 2 Ω loads (4 Ω
• PBTL mode for the control of 1 - 2 Ω loads (2 Ω)
• Line Out mode for controlling an external amplifier as a line level signal
• Specifications of the Line Out mode
  
• Max. Output level: 5 V RMS balanced (in line out mode)
• THD+N < 0,03 % (f = 1 kHz, digitaler Eingang 0 dB)
• SNR >102 dB (f = 1 kHz, A-weighted)
• Frequency response: 20 Hz - 20 kHz ± 0.2 dB
  
• DSP processing
• Dirac live correction (8 ch),
• Matrix mixer, miniDSP processing on all 12 outputs
• Configuration presets Four onboard stored presets for Dirac Live and miniDSP processing
• External wired remote control
• (RJ11 cable for power and data) selects the active preset, master volume and master mute, Dirac Live on/off; OLED status display.
• Power supply / REM in&out
  
• 10 -16 V DC compliant
  
• REM in (4 V DC trigger level)
  
• Dimensions (W x D x H) 321 x 150 x 45 mm (main device), 102 x 23 x 41 (wired remote control)
  
• Housing: Powder-coated steel with aluminum heat sink

• 1 x Harmony 8x12 car amplifier
  
• 1 x Dirac Live license
  
• 2 x loudspeaker wiring harness
  
• 1 x 1m USB cable
  
• 1 x UMIK-1 (if option selected in shopping cart)
  
• 1 x Control GUI plugin is automatically made available under User - Downloads upon purchase
  
• 1 x 5m remote control cable + OLED remote control module