Mercedes subwoofer enclosure for car

Buy Cheap Mercedes Subwoofer Enclosures in the Masori Car Audio Online Shop

Those searching for perfectly matched subwoofer enclosures for Mercedes in the car audio sector will find a variety of innovative solutions at Masori. Thanks to precise manufacturing and high-quality materials such as 18mm MDF or thicker chipboard, an ideal resonance behavior is achieved. At the same time, the enclosure remains compact enough to fit in C-Class, E-Class, or even S-Class models with almost no modifications. For W212 or W205 series, the dimensions can be individually adjusted, allowing, for example, a 10-inch or 12-inch subwoofer with 2 Ohm or 4 Ohm impedance to be installed. The specially adapted internal volumes enable impressive bass reproduction.

Technical data and variants for every need

In addition to the classic bass reflex design, closed versions are also available, which are designed for a drier and more precise bass at high sound pressure levels. For plug-and-play applications in newer Mercedes models or also in Audi, VW, BMW, SEAT, or Opel, special quick-connect adapters are available. This allows for a quick installation without extensive modifications. Those with very specific performance requirements can choose from the following parameters:

• Subwoofer diameter: 8, 10, 12, or 15 inches
• Load capacity RMS: Up to 1000 watts
• Frequency range: 20 Hz to 120 Hz
• Case volume: 15 to 50 liters (depending on the model)
• Impedance: 2 Ω or 4 Ω
• Material: High-density MDF, multiplex or chipboard with reinforcements

To reduce resonances, many versions feature internal reinforcements, damping mats, and sturdy terminals. Possible surfaces include black felt, artificial leather, or carpet fabric, which visually blend seamlessly into the Mercedes interior.

Efficient assembly and useful accessories

Installation is usually very straightforward, as every Mercedes subwoofer enclosure from Masori is tailored to common installation locations. In the C-Class (W203, W204, W205), the trunk behind the rear seat backrest is often suitable, while in AMG variants, the spare wheel well is used as the mounting position. Those interested in an under-seat solution benefit from the space-saving underseat enclosures. The following tools are essential for a smooth installation:

• Amplifier cable set with 20 mm² to 35 mm² cross-section
• High-quality RCA cables for signal transmission
• Insulation material against vibrations (butyl mats, alubutyl)
• Power cap or capacitor for high voltage spikes
• Variable frequency crossover with selectable crossover points
• Stable fastening elements (screws, brackets, Velcro)

Those who prefer to entrust the complex wiring and alignment to professionals can use our Installation service in Frankfurt Oder use. Our experts professionally install the system and optimize the bass reproduction on site.

Advanced features for maximum deep bass performance

To ensure that the Mercedes subwoofer enclosure integrates seamlessly into the existing car audio system, amplifiers with sufficient power are recommended. For 2-ohm subwoofers, Class-D amplifiers with at least 400 watts RMS per channel should be connected so that the woofer can reach its full potential. For systems with high bass intensity, 1000-watt amplifiers are suitable. Technical specifications of a suitable amplifier:

With a powerful amplifier, there is enough headroom to achieve distortion-free sound even with larger woofers such as 12 or 15 inches. To avoid clipping, the gain and low-pass filter settings should be carefully configured. Additionally, a DSP processor is recommended to fine-tune the frequency response even more precisely in every Mercedes vehicle model.

Integration into the existing audio system and expert advice

Many new Mercedes models already come with OEM amplifiers and active bass modules in the rear. Our custom subwoofer enclosures can be integrated with these via high-level inputs or special MOST interface adapters. For drivers using a mass-produced radio in Audi, VW, or BMW, similar interfaces exist to integrate our enclosure plug & play. This way, the original look is preserved while achieving significantly stronger bass. If there are any uncertainties about whether a model is compatible with the respective setup, our AI chatbot is available for compatibility checks. Additionally, the Expert support from Masori for all questions regarding audio tuning.

Diverse expansion options for more sound variety

Those who want to further upgrade their Mercedes audio system will find a huge selection of speaker systems, coaxial speakers, amplifiers, and cables in the Masori car audio online shop. Flexible DSP devices are available for the crossovers, allowing precise tuning measures to be implemented. If you want to set up a three-way system or integrate additional full-range speakers, you can easily access the extensive portfolio. Here are some examples:

• Spacer rings for speaker installation in doors
• Sound processors with time adjustment and equalizing
• Multichannel amplifiers with up to six channels
• Midrange woofers in the range of 6.5 to 8 inches diameter
• Ride and Road Noise Insulations for Doors and Floor

Those who like to experiment can also tune the Mercedes subwoofer enclosure with bass reflex ports or passive radiators to better reproduce low frequencies. This allows for sound pressure levels of over 140 dB without unwanted noise interference.

Optimal service and professional installation

At Masori, you benefit from a wide selection of subwoofer enclosures for various Mercedes vehicles, excellent advice, and a perfect adaptation to your individual music taste. If you find self-installation too complicated or prefer to rely on absolute expertise, you can turn to our Installation service in Frankfurt Oder zurückgreifen. The service ranges from the initial vehicle analysis to the laying of the power and signal cables to the final tuning of the system. This ensures that your Mercedes delivers powerful and clear bass without compromising everyday usability.