100 WATT RMS
JL Audio-MHD900/5-24V-5-channel amplifier-Masori.de
JL Audio-MHD900/5-24V-5-channel amplifier-Masori.de
JL Audio-MHD900/5-24V-5-channel amplifier-Masori.de
JL Audio-MHD900/5-24V-5-channel amplifier-Masori.de

JL Audio MHD900/5-24V

5-channel amplifier

Normal price Special price 1.969,00€

/piece

(/ )

VAT included. Excl. VAT incl. shipping costs excl. shipping costs

The quantity exceeds the available stock.

Your advantages with Masori

0% financing on all products

Advice from Carhifi experts

Seen this item cheaper elsewhere? Write us an email at [email protected] and you will get the same price, plus a free accessory and benefit from Masori Lifetime Support! Warranty conditions.

Description

    The MHD900/5-24V is a 5-channel marine amplifier produced by JL Audio, a renowned manufacturer in the audio segment. This amplifier was specially developed for 24 V systems and is known above all for its outstanding audio performance and long service life. At the same time, the MHD900/5-24V offers the possibility to function as a compact "one-box solution", making it ideal for installations with limited space. With its four main channels and additional subwoofer channel, this JL Audio amplifier delivers an impressive 900 watts of power in total.

_msttexthash="144339" _msthash="2"Überblick

Only for 24 V systems
    5-channel class D marine system amplifier, 100 W x 4 + 500 W x 1
  • Thanks to its ability to function as a "one-box solution", the MHD900/5-24V is ideal for installations where space is at a premium and sound quality is paramount.
  • Although this amazing amplifier is extremely compact, it can comfortably drive a complete high-performance marine audio system: that is, four satellite speaker systems and a subwoofer system... with a very serious 900 watts of power!
  • With our single cycle control switching design and R.I.P.S. technology, the MHD900/5-24V delivers 100W x 4 to its four main channels and a very powerful 500W to its subwoofer channel. Thanks to R.I.P.S., high power can be delivered over a wide range of load impedances, while tight power supply regulation keeps distortion low and maximizes sound quality.
  • This marine amplifier features a white and gray powder coat finish, a sealed cover for the controls and stainless steel hardware for long life in the marine environment.
  • This amplifier is designed for use in vessels with 24 volt negative grounded electrical systems. Use of this product in containers with positive ground and/or voltages other than 24 V may result in damage to the product and will void the warranty.

Service description

    • Frequency response (main channels) 12 Hz - 28 kHz (+0, -1dB)
    • Frequency response (subwoofer channel) 12 Hz - 10 kHz (+0, -1dB)
    • Signal-to-noise ratio, relative to the highest rated power (main channels) >108.5 dB below the rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    • Signal-to-noise ratio, relative to 1 W (main channels) >88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
    • Attenuation factor @ 4 Ω >400 / 50 Hz
    • Attenuation factor @ 2 Ω >200 / 50 Hz
    • THD+N @ Nennleistung (Hauptkanäle) <0,03% @ 4 Ω
    • THD+N @ Nennleistung (Subwoofer-Kanal) <0,05% @ 4 Ω
    • Input voltage range @ RCA inputs switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
    • Min. copper power / ground wire cross-section Accepts up to 4 AWG wires
    • Fuse rating 30 A (AFS, AGU or MaxiFuse™)

Rated continuous power (RMS) @ 28.8 V

    • Main channels @ 4 Ω 100 W RMS x 4
    • Main channels @ 3 Ω 75 W RMS x 4
    • Main channels @ 2 Ω 75 W RMS x 4
    • Main channels @ 1.5 Ω 75 W RMS x 4
    • Main channels - Bridged @ 8 Ω 200 W RMS x 2
    • Main channels - Bridged @ 4 Ω 150 W RMS x 2
    • Subwoofer channel @ 4 Ω 500 W RMS x 1
    • Subwoofer channel @ 3 Ω 500 W RMS x 1
    • Subwoofer channel @ 2 Ω 500 W RMS x 1
    • Subwoofer channel @ 1.5 Ω 500 W RMS x 1

Rated continuous power (RMS) @ 25 V

    • Main channels @ 4 Ω 100 W RMS x 4
    • Main channels @ 3 Ω 75 W RMS x 4
    • Main channels @ 2 Ω 75 W RMS x 4
    • Main channels @ 1.5 Ω 75 W RMS x 4
    • Main channels - Bridged @ 8 Ω 200 W RMS x 2
    • Main channels - Bridged @ 4 Ω 150 W RMS x 2
    • Subwoofer channel @ 4 Ω 500 W RMS x 1
    • Subwoofer channel @ 3 Ω 500 W RMS x 1
    • Subwoofer channel @ 2 Ω 500 W RMS x 1
    • Subwoofer channel @ 1.5 Ω 500 W RMS x 1

Signal processing

    • Filter mode(s): Channels 1 &; 2 (front) High-pass only
    • Filter slope(s): Channels 1 & 2 (front) 12/24 dB/octave
    • Filter frequency range: Channels 1 &; 2 (front) 50 Hz - 500 Hz
    • Filter mode(s): Channels 3 & 4 (rear) High-pass only
    • Filter slope(s): Channels 3 & 4 (rear) 12/24 dB/octave
    • Filter frequency range: Channels 3 &; 4 50 Hz - 500 Hz
    • Filter mode(s): Subwoofer channel low-pass only
    • Filter slope(s): Subwoofer channel 12/24 dB/octave
    • Filter frequency range: Subwoofer channel 50 Hz - 500 Hz
    • Locked, calibrated filter frequency potentiometers Yes
    • Filter defeat function Yes
    • Infrasonic filter: Subwoofer channel 30 Hz, can be switched off
    • Optional remote control (HD-RLC)
    • Remote level modes Sub-channel only
    • Channel input mode switch Yes (2/4/6 channels)
    • Pass-through preamplifier output None
    • Selection of the source channel for PreOuts N/A

Dimensions

    Lineart Top-View and Side-View of MHD900/5 Amplifier with Height (H), Width (W) and Depth (D) dimension labels

    • Height (H) 49 mm
    • Width (B) 273 mm
    • Depth (D) 199 mm
    • Net weight 3.11 kg