JL Audio M600/6-24V
6-channel amplifier
Du sparst 5% auf diesen Artikel, indem du beim Bestellvorgang die Zahlungsart Vorkasse (Banküberweisung) wählst Der Rabatt wird automatisch abgezogen!
Günstiger gesehen?
„Wir halten mit - garantiert!" Nutze die Tiefpreisgarantie! Wenn du einen Artikel auf einer Internetseite innerhalb der EU günstiger findest, ziehen wir mit dem Preis der Konkurrenz gleich und legen einen Artikel aus unserem Zubehörsortiment bei.
Beschreibung
Discover the M600/6-24V, a 6-channel marine amplifier from the renowned manufacturer JL Audio. Equipped with intelligent controls and integrated tone control, this amplifier brings an impressive sound experience to your maritime environment. Specially developed for 24 V systems, the M600/6-24V offers high flexibility and performance, which is made possible by its NexD ultra-high-speed switching designâ„¢ In addition, the robust powder coating and high-quality stainless steel hardware ensure a long service life, even under the toughest conditions at sea.
_msttexthash="144339" _msthash="2" overview
- For 24 V systems only: 6-channel Class D marine wideband amplifier, 100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω - 28.8 V
- This incredibly flexible amplifier packs a significant full-range punch, delivering an astonishing 100 watts to each of its six channels into 2 Ω (28.8 V, 1% THD). The breakthrough that enables so much power in such a small package is our NexD ultra-high-speed switching design™ , which enables full-bandwidth Class-D operation with extremely low distortion and excellent efficiency.
- The M600/6-24V gives you many great options. Use it as a six-channel satellite amplifier with 75W x 6 @ 4Ω or bridge four of its channels to create a staggered four-channel amplifier with 200W x 2 @ 4Ω to one satellite pair and 75W x 2 @ 4Ω to a secondary satellite pair. You can also drive two subwoofers at 200W each and a pair of satellites at 75W x 2. The M600/6-24V includes a 12dB/octave filter for each channel bank that can be configured as a low-pass or high-pass filter and offers a continuous cutoff frequency selection from 50-500Hz. With the additional HD-RLC remote control (sold separately) you have the ability to control the level of two, four or all six of the amplifier's channel levels from a remote location.
- This marine amplifier features a white and gray powder coat finish, a sealed control cover, and stainless steel hardware for long life in the marine environment.
- This amplifier is designed to operate in containers with 24 volt negative grounded electrical systems. Using this product in containers with positive ground and/or voltages other than 24 volts may cause damage to the product and will void the warranty.
service description
- Frequency response 12 Hz - 22 kHz (+0, -1dB)
- Signal-to-noise ratio, based on the highest rated power >104 dB below the rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Signal-to-noise ratio, based on 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping factor @ 4 Ω >150 / 50 Hz
- Damping factor @ 2 Ω >75 / 50 Hz
- THD+N @ rated power <1% @ 2 Ω per channel.
- Input voltage range @ RCA inputs 100 mV - 4 V RMS
- minutesCopper Power / Ground Wire Cross Section 4 AWG Wire
- Fuse rating 30 A (AFS, AGU or MaxiFuseâ„¢ )
Rated continuous power (RMS) @ 28.8 V
- @ 4 Ω 75 W RMS x 6
- @ 2 Ω 100 W RMS x 6
- Bridged @ 4Ω 200 W RMS x 3
Rated continuous power (RMS) @ 25 V
- @ 4 Ω 60 W RMS x 6
- @ 2 Ω 90 W RMS x 6
- Bridged @ 4Ω 180 W RMS x 3
signal processing
- Filter mode(s): Lowpass or Highpass
- Filter slope(s) 12 dB/octave
- filter frequency range 50 Hz - 500 Hz
- Locked, calibrated filter frequency potentiometer Yes
- Filter defeat function Yes
- Optional remote control (HD-RLC)
- Remote level modes 2 or 4 or all channels
- Channel input mode switch Yes (2/4/6 channels)
- Pass-through preamp output None
- Selecting the source channel for PreOuts N/A
Dimensions
- Height (H) 52 mm
- width (B) 260 mm
- Depth (D) 180 mm
- Net weight: 2.63 kg