JL Audio M3-10IB

Discover the M3-10IB, a high-performance marine subwoofer from JL Audio. Measuring 25cm (10 inches), this model has been specially designed to give you the best sound on your boat. Equipped with innovative sound dampening technology, this subwoofer reduces vibration and noise, allowing you to achieve powerful musical experiences with less volume. Specifically designed and tested for marine use to the most stringent guidelines, the M3-10IB delivers outstanding sound quality even in the harshest conditions. Manufactured in JL Audio's own factory in Florida, this subwoofer is a valuable addition to any marine audio system.

• M3 10-inch marine subwoofer for use with infinite baffle (175 W, 4 Ω) - Classic grille in glossy white
• With the right system setup, your smaller main speakers can be relieved of the burden of reproducing low frequencies by adding a subwoofer. This allows your entire system to play louder and sound cleaner at all listening levels.
• Developed and built specifically for marine applications, the M3 subwoofers with infinite baffle are designed to operate without a special enclosure and are geared towards moderate power applications.
• The M3-10 is best suited for amplifier power in the range of 50 W to 175 W and is optimized for operation with a large volume of air behind it (at least 2.56 l ). If you need a subwoofer that operates in a small, sealed enclosure, choose our M6-10W instead.
• Like all JL Audio marine speakers, this driver is built to withstand a true saltwater marine environment and provide years of listening pleasure.
• This model is produced at the JL Audio factory in Miramar, Florida, using global materials and components.
• Available individually.

• Continuous load capacity (RMS) 175 W
• Nominal impedance (Zohm) 4 Ohm
• Free air resonance (Fs) 41.84 Hz
• Electrical "Q" (Qes) 0.806
• Mechanical "Q" (QMS) 11,751
• Total loudspeaker "Q" (Qts) 0.754
• Equivalent conformity (Vas) 36.53 l
• Linear one-way deflection (Xmax)* 11 mm
• Reference efficiency (no)
• Efficiency (1 W / 1 m)** 87.23 dB SPL
• Effective piston area (Sd) 0.0327 square meters
• Direct current resistance (Re) 3.957 Ω
• Use of the infinite baffle Yes (preferred)
• Min. sealed housing volume 56.6 l (or larger)
• Optimally sealed housing volume 70.8 l

• Nominal diameter 250 mm
• Overall diameter (A) 273 mm
• Diameter of the mounting hole (B) 225 mm
• Bolt hole circle diameter (C) 247 mm
• Outer motor diameter (D) 134 mm
• Installation depth (E) 130 mm
• Displacement of the loudspeaker 1.13 l
• Net weight 2.94 kg