JL Audio 12W1V3-2
12" (30cm) subwoofer
still
/piece
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
The 12W1V3-2 is a 12" (30cm) subwoofer from the renowned manufacturer JL Audio. This subwoofer is known for its excellent performance and is one of JL Audio's best-selling models. With an output of 300W at 2 ohms, remarkable excursion and linearity as well as optimum performance and reliability thanks to JL Audio's unique technologies, this could be the missing piece of the puzzle in your sound experience. It is no coincidence that the 12W1V3-2 was rated 1.5 and "very good" in the 3/2014 issue of Car & Hifi magazine. Look forward to shockingly deep and high-quality sub-bass.
Features
- The 12W1v3 is a lightweight 12-inch driver with excellent performance characteristics at moderate power levels.
- It is characterized by a moderate installation depth without pole slots, so that the rear of the motor structure can be placed directly on a housing boundary.
- Thanks to its excellent excursion and linearity, it can reproduce sub-bass with shock-like extension and quality.
- Several proprietary technologies from JL Audio enhance its performance and reliability.
- The 12W1v3-2 is best used with amplifier power levels in the 75W - 300W range and is optimized for operation in a compact, 31.5L (1.10 cu. ft.), sealed enclosure.
General specifications
- Continuous load capacity (RMS) : 300 W
- Recommended amplifier power (RMS) : 75 - 300 W
- Nominal impedance (Znom) : 2 Ω
- Protective grille optionally available
Dimensions
- Nominal diameter: 300 mm / 12.0 inch
- Overall diameter (A): 318 mm / 12.5 inches
- Installation diameter (B) : 281 mm / 11.0625 inch
- Bolt circle diameter (C) : 297 mm / 11.7 inch
- Motor outer diameter (D): 133 mm / 5.25 inches
- Installation depth (E) : 137 mm (5.41 inch)
- Volume displacement : 0.052 cu ft / 1.47 L
- Net weight : 12,2 lb / 5,5 kg
Parameters
- Free air resonance frequency (Fs) : 26.55 Hz
- Electrical "Q" (Qes) : 0.554
- Mechanical "Q" (Qms) : 8,731
- Total quality "Q" (Qts) ; 0.521
- Equivalent volume (Vas) : 2.544 cu ft / 72.04 L
- One-way linear deflection (Xmax) : 0.45 inch / 11 mm
- Efficiency : 0,23%
- Efficiency (1 W / 1 m) : 85.9 dB SPL
- Membrane area (Sd) : 0.0525 square meter
- Direct current resistance (Re) : 2.210 Ω
Closed housing specifications
- Wall thickness: 19 mm / 0.75 inch
- Thickness of the front baffle: 19 mm / 0.75 inch
- Volume (net int.) : 1.10 cu ft / 31.5 L
- Outer width (W) : 406 mm / 16 inch
- Outer height (H) : 406 mm (16 inch)
- Outer depth (D) : 279 mm / 11 inch
- F3 : 38.99 Hz
- Fc : 48.39 Hz
- Qtc : 0,9496
Specifications for bass reflex enclosures
- Wall thickness: 19 mm / 0.75 inch
- Thickness of the front baffle: 19 mm / 0.75 inch
- Volume (net int.) : 1.6 cu ft / 45.3 L
- Outer width (W) : 635 mm / 25 inch
- Outer height (H) : 394 mm (15.5 inches)
- Outer depth (D) : 330 mm (13 inch)
- Internal slot connection width (SW): 38 mm (1.5 inch)
- Internal slot height (SH): 356 mm / 14 inches
- Internal slot connection length (SL): 781 mm / 30.75 inches
- Length of the port extension (EL): 432 mm (17 inches)
- Tuning frequency (Fb) : 31.79 Hz
- F3 : 31 Hz
