LFB Fiat ISO/Mini ISO 6 LFB Funktionen

LFB Fiat ISO/Mini ISO 6 LFB Funktionen

Technical Highlights

Coil resistance: 75 Ohm min for 1 relay, 150 Ohm for 2 relays.
Total load: 100 mA max, current requirement over 100 mA required.
Connection cable: 42s/acv for steering wheel remote controls from various manufacturers.
More technical details

€99.00

~~€99.00~~ €99.00

2% discount with credit card

including VAT

Free shipping for this item!

datasheet

ACV-LFB Fiat ISO/Mini ISO 6 LFB Funktionen-Lenkradfernbedienung-masori-kaufen

€99.00

~~€99.00~~ €99.00

Product description

LFB Fiat ISO/Mini ISO 6 LFB Functions product is a Steering Wheel Remote Control from ACV with connection via ISO / Mini ISO. Designed for vehicles with OEM device as well as for vehicles with CAN Bus and analog LFB in the Mini-ISO Plug C2 Pin 10/11/12. For vehicles with 6 steering wheel remote control buttons / functions. Suitable for Fiat Ducato (ZAF 250) 06/2006 - 06/2011. In vehicles with Blue&Me, the Silverbox module must remain installed. Provided signals: red +12V ignition terminal 15, orange +12V lighting terminal 58, purple/white +12V reverse signal, green ground GND handbrake signal. Total output load capacity 100 mA max.; current demand greater than 100 mA, 1 relay coil resistance 75 Ohm min., 2 relay coil resistance 150 Ohm min. Reimport vehicles or vehicles with different software may be incompatible in functions.

Features

Steering Wheel Remote Control
Connection: ISO / Mini ISO
Analog
CAN Bus
Vehicles with OEM device
Vehicles with 6 steering wheel remote control buttons / functions
Vehicles with CAN Bus and analog LFB in the Mini-ISO Plug C2 Pin 10/11/12
Vehicles with Blue&Me > Silverbox module must remain installed
For Fiat Ducato (ZAF 250) 06/2006 - 06/2011

Technical Data

red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reverse signal
green: ground GND handbrake signal
Total output load capacity: 100 mA max.
Current demand greater than 100 mA
1 relay coil resistance 75 Ohm min.
2 relay coil resistance 150 Ohm min.
Reimport vehicles or vehicles with different software may be incompatible in functions.
Connection cables for the following radio manufacturers
- LFB cable 42s/acv > Alpine jack: 42ctalpinelead
- LFB cable 42s/acv > Parrot 4 Pin: 42ctasteroidlead
- LFB cable 42s/acv > Bosch-Blaupunkt >2010 Mini ISO: 42ctblaupunktlead
- LFB cable 42s/acv > Blaupunkt/China HU/Kenwood 3 cables: 42ctchinahulead
- LFB cable 42s/acv > Clarion jack: 42ctclarionlead
- LFB cable 42s/acv > JVC 1 cable/jack: 42ctjvclead
- LFB cable 42s/acv > Kenwood 1 cable: 42ctkenwoodlead
- LFB cable 42s/acv > Multilead various devices: 42ctmultilead
- LFB cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead3
- LFB cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead5
- LFB cable 42s/acv > Panasonic 1 cable: 42ctpanasoniclead
- LFB cable 42s/acv > Blaupunkt/Kenwood/Pioneer jack: 42ctpioneerlead
- LFB cable 42s/acv > Pioneer AVH/DMH/SPH 2022> jack loose: 42ctpioneerlead2
- LFB cable 42s/acv > Devices with LFB learning function: 42ctsmartlead
- LFB cable 42s/acv > Blaupunkt/Kenwood/Sony jack: 42ctsonylead
- LFB cable 42s/acv > XZent/Zenec 1 cable: 42ctzeneclead

datasheet

Open data sheet

Frequently Asked Questions about LFB Fiat ISO/Mini ISO 6 LFB Funktionen

How does the Steering Wheel Remote Control with LFB Fiat ISO/Mini ISO 6 LFB functions from ACV work?

The LFB Fiat ISO/Mini ISO 6 LFB functions adapter from ACV allows you to retain the original steering wheel remote control functions when replacing your factory radio with an aftermarket radio. The integration uses a CAN bus connection and works particularly well with vehicles that have an analog steering wheel remote control in the Mini ISO plug (C2 Pin 10/11/12). Ensure that the Blue&Me Silverbox module remains in the vehicle to avoid compatibility issues. Note that depending on the vehicle's equipment and the software of the aftermarket device, certain control functions may be omitted or replaced. For optimal functionality, the vehicle settings, including the steering wheel controls, should be checked for operability before final assembly.

Which vehicles are compatible with the LFB Fiat ISO/Mini ISO adapter?

The LFB Fiat ISO/Mini ISO 6 LFB functions product from ACV is specifically designed for Fiat Ducato models (ZAF 250) from the production year 06/2006 to 06/2011. It is important to ensure the compatibility of the adapter with the connection plugs in the vehicle by comparing the depicted plugs. Some re-imported vehicles or those with different software may be incompatible in terms of functions. Furthermore, vehicles with an LFB interface via the CAN bus or Mini ISO in C2 Pin 10/11/12 are intended for use. Check if one of the specified factory radios was installed in your vehicle to ensure full compatibility.

What technical signals are supported by the LFB Fiat ISO adapter?

The LFB Fiat ISO/Mini ISO 6 LFB functions adapter provides various technical signals: It offers a 12V ignition supply at terminal 15 (red), a 12V lighting control at terminal 58 (orange), as well as a 12V reverse signal (purple/white) and a ground connection via the green GND cable. The signal transmission occurs at a maximum total output load of 100 mA, with the current demand potentially exceeding 100 mA. Additionally, the adapter performs the handbrake signal transmission and relies on a relay coil control with a minimum of 75 Ohms for signal transmission stability, and with two relay coils, a resistance of at least 150 Ohms.

How do I install the LFB Fiat ISO/Mini ISO adapter from ACV in my vehicle?

The installation of the LFB Fiat ISO/Mini ISO 6 LFB Functions Adapter is done by visually and technically matching the plugs of the adapter with the vehicle. The compatibility of the plugs is essential for the installation. The following connections must be made: The Mini-ISO plug is inserted into the original connection of the vehicle. During installation, care must be taken to ensure that the various pins are correctly assigned, especially regarding the CAN Bus and analog signals. After correct installation, all vehicle functions, including the Steering Wheel Remote Control, should be checked to ensure full functionality.

Which radio manufacturers is the ACV LFB cable compatible with?

The LFB Fiat ISO/Mini ISO 6 LFB Functions Adapter from ACV supports a variety of radio manufacturers. These include Alpine, Parrot, Bosch-Blaupunkt >2010, Clarion, JVC, Kenwood, Panasonic, Blaupunkt/China HU, and Pioneer models. Compatibility is enabled through specific LFB cable types optimized for various jack and pin connections, such as the ACV Lead models: 42ctalpinelead for Alpine jack, 42ctasteroidlead for Parrot 4 Pin, and 42ctkenwoodlead for Kenwood. Furthermore, there are models for multi-lead devices that cover various connection types from Blaupunkt to Sony to XZent.

What specific features does the Mini ISO plug of the ACV adapter have?

The Mini ISO plug of the LFB Fiat ISO/Mini ISO 6 LFB Functions Adapter is designed for use in vehicles with CAN-Bus and an analog Steering Wheel Remote Control. Typically, these are connected to pins C2 10/11/12 of the vehicle. The Mini ISO plug supports signal transmission for the steering wheel control and ensures a stable connection to the aftermarket radios. It includes signals such as terminal 15 for ignition and terminal 58 for lighting. The design ensures a reliable connection that optimizes the original functions of the vehicle and protects against potential malfunctions.

Can I use the ACV LFB adapter if my vehicle is a reimport or has different software?

In vehicles that are reimport vehicles or have different software configurations, using the LFB Fiat ISO/Mini ISO 6 LFB Functions Adapter from ACV may lead to limitations. Specific functions may be incompatible in these cases, even if the physical connections are made correctly. It is recommended to check the existing vehicle settings and the installed software. Keep in mind that prior adjustments or comparisons with original factory radios in your vehicle can help ensure compatibility, especially when new devices are integrated indirectly or as part of an upgrade.

Which vehicle settings should be checked when using the ACV adapter?

Before the final installation of the Steering Wheel Remote Control Fiat ISO/Mini ISO 6 Steering Wheel Remote Control Functions Adapter from ACV, it is advisable to check the full functionality of the vehicle settings. This includes the control of the Steering Wheel Remote Control, the correct setup of the ignition and lighting contacts (terminals 15 and 58), as well as the reverse signal. It should be ensured that all stored data of the vehicle software aligns with the functional requirements of the adapter. A functionality test of all relevant systems can reveal possible malfunctions and should be conducted before the final assembly begins.

What specific coil resistances does the ACV adapter require?

For the efficient operation of the Steering Wheel Remote Control Fiat ISO/Mini ISO 6 Steering Wheel Remote Control Functions Adapter from ACV, specific coil resistances are required to ensure both the capacity and stability of the signal processing. When using a relay, the minimum coil resistance must be 75 Ohms, while integrating two relays requires a minimum coil resistance of 150 Ohms. These technical specifications ensure the optimal functioning of the adapter during variable use. They also reduce the risk of short circuits or overloads, thereby protecting certain vehicle functions.

What should I pay attention to during the final assembly of the Steering Wheel Remote Control Fiat ISO/Mini ISO adapter?

During the final assembly of the Steering Wheel Remote Control Fiat ISO/Mini ISO 6 Steering Wheel Remote Control Functions Adapter from ACV, it is essential to carefully check that all cable connections are secure and correctly assigned. It should be ensured that the corresponding pins in the Mini-ISO plug are correctly connected and that compatibility with the vehicle software has been verified. Furthermore, the previous tests on the vehicle settings should be conducted to ensure complete functionality and compatibility. The installation should be stabilized to ensure long-term reliability of the connection. The risk of damage or malfunction is reduced by careful adherence to measurements.