ACV LFB Fiat 52Pin
Steering wheel remote control
/piece
Seen cheaper?
"We keep up - guaranteed!" Take advantage of the low price guarantee! If you find an item cheaper on a website within the EU, we will match the competitor's price and add an item from our range of accessories.
Your advantages with Masori
Description
Wenn du dein Werksradio gegen ein Nachrüstradio tauschen möchtest, empfehlen wir dir, die originalen Lenkradfernbedienungsfunktionen beizubehalten.
Beachte jedoch, dass je nach Fahrzeugausstattung, Funktionsumfang und Software des Nachrüstgeräts einzelne Bedienfunktionen entfallen oder durch andere Funktionen ersetzt werden können.
Vergleiche die abgebildeten Stecker des Adapters mit denen in deinem Fahrzeug und stelle sicher, dass sie optisch und technisch passen.
Bitte prüfe auch, ob eines der angegebenen originalen Werksradios in deinem Fahrzeug verbaut war.
Vor der Endmontage solltest du die Funktionen deines Fahrzeugs, die Fahrzeugeinstellungen und die Lenkradfernbedienung auf ihre Funktionstüchtigkeit überprüfen, um sicherzustellen, dass alles reibungslos funktioniert.
Note
CAN bus
- Anschluss: 52 Pin Fiat Stecker
- Fahrzeuge mit OEM Gerät
- Fahrzeuge ohne Continental VP1 / VP2 / Daiichi OEM Gerät*
Suitable for the following vehicles
Fiat
- Fiat Ducato (ZAF 250) 05/2014 - 11/2021
The following signals are provided
- Reimported vehicles or vehicles with different software may be incompatible in terms of functions.
- red: +12V ignition terminal 15
- orange: +12V lighting terminal 58
- purple/white: +12V reversing signal
- pink: speed signal
- green: Ground GND handbrake signal
- Total output load capacity: 100 mA max.
Current requirement greater than 100 mA
- 1 relay Coil resistance 75 Ohm min.
- 2 Ralais Coil resistance 150 Ohm min.
- Lenkrdadfernbedienung
- *Fahrzeuge mit Continental VP1 / VP2 OEM Gerät:
- LFB Citroen/Fiat/Opel/Peugeot VP1/VP2/Daiichi 52Pin > Artikel: 42sfa019
Connection cable for the following radio manufacturers
- LFB cable 42s/acv > Alpine jack: 42ctalpinelead
- LFB cable 42s/acv > Parrot 4 pin: 42ctasteroidlead
- LFB cable 42s/acv > Bosch-Blaupunkt >2010 Mini ISO: 42ctblaupunktlead
- LFB cable 42s/acv > Blaupunkt/China HU/Kenwood 3 cable: 42ctchinahulead
- LFB cable 42s/acv > Clarion jack: 42ctclarionlead
- LFB cable 42s/acv > JVC 1 cable/jack: 42ctjvclead
- LFB cable 42s/acv > Kenwood 1 cable: 42ctkenwoodlead
- LFB cable 42s/acv > Multilead various devices: 42ctmultilead
- LFB cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead3
- LFB cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead5
- LFB cable 42s/acv > Panasonic 1 cable: 42ctpanasoniclead
- LFB cable 42s/acv > Blaupunkt/Kenwood/Pioneer jack: 42ctpioneerlead
- LFB cable 42s/acv > Pioneer AVH/DMH/SPH 2022> jack loose: 42ctpioneerlead2
- LFB cable 42s/acv > Devices with LFB teach-in function: 42ctsmartlead
- LFB cable 42s/acv > Blaupunkt/Kenwood/Sony jack: 42ctsonylead
- LFB cable 42s/acv > XZent/Zenec 1 cable: 42ctzeneclead
General installation instructions
Review
- 1: Checking all operating functions and vehicle setting functions of the OEM device
- 2: De-energize the OEM device
- 3: Check all interface connections for correctness and continuity without voltage
Connection and connection sequence
- 1: De-energize the settings and hardware configuration of the interface
- 2: Check the configuration of the radio connection cable
- 3: Connect the radio connection cable according to the operating instructions for the retrofit device
- 4: Connect all other connections according to the operating instructions for the retrofit device
- 5: Connection of the complete installation to the vehicle with live connection last
- 6: Software configuration of the interface according to the instructions in the article text and in the BDA
- 7: Configuration of the retrofit device according to the operating instructions for the retrofit device Steering wheel remote control/camera/FSE/antenna phantom power and others
- 8: Function test steering wheel remote control and vehicle
Changes to the hardware configuration of the interface and the radio connection cable
- 1: Carry out changes without tension
- 2: Connection after change see above 5 to 8
In the event of a malfunction of the interface or the vehicle
- 1: Retrofit to the OEM device
- 2: Operate OEM device
- 3: Establish CAN bus silence
- 4: Checking the hardware configuration of the interface
- 5: Connection after CAN bus rest see above 5 to 8
- Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the operating instructions are for guidance and information purposes only for trained specialist personnel.
Additional connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions
- 1: Connections and modifications must only be carried out by trained specialist personnel
- 2: Connections and modifications must be checked for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications before connection
- 3: Connections and modifications must be checked for function and correctness before connection by measuring and adjusting using the vehicle's cable assignment diagram
- 4: Connections and modifications are made on your own responsibility without any guarantee of function
- 5: Connections and modifications are carried out under your own responsibility without guarantee of damage to the vehicle, the retrofit device or the interface
- 6: Modifications to the pre-assembled wiring harness may invalidate the product warranty
Download data sheet
