Germany (€)
SPL Show HP 802
SPL Show HP 802
Technical Highlights
- 1800 watts total power, impedance at 1 ohm, three operating modes.
- Distortion factor below 0.05%, signal-to-noise ratio 103 dB.
- Four toroidal transformers, hi-pass and lo-pass filters available.
- More technical details
Delivery & availability
The selected variant is in stock at Masori. The delivery estimate above applies to the shown selection and destination country.
The selected variant is not currently in stock at Masori and is sourced from the supplier. Refer to the estimated delivery window above.
Pre-order: this variant is not currently in our stock. Without a confirmed delivery date we cannot give an exact arrival date. We ship once the goods are available.
The selected variant cannot currently be ordered. We can offer a suitable alternative available sooner.
Orders ship together based on the item with the longest lead time. If you need something sooner, ask by email about a possible partial shipment beforehand.
Shipping costs and options depend on the destination. Check the shipping calculator; final costs are shown before placing the order.
Email us the product, car, existing system and budget. We will offer an alternative available sooner.
Ask for an alternative available soonerReply in 1–3 working days · Mon–Fri
Availability for pickups could not be loaded.
shipping calculator
Pay in instalments
Pay comfortably in 12 interest-free installments of €59,37 with Klarna.
Receive an email recommendation for your car, existing system and budget. Replies within 1–3 working days, Monday to Friday.
The Hertz SPL Show HP 802 is a 2-Channel Amplifier of Class AB with a total power of RMS 1800 Watts. The model operates with 11–15 V DC and is equipped with an oversized Power Supply and four toroidal transformers. The minimum load impedances are 1 Ohm in 2-channel operation and 2 Ohms in 1-channel operation. Integrated are Hi-Pass and Lo-Pass filters with 50–1k Hz or 500–10k Hz, a bandpass of 50–10k Hz, as well as a parametric equalizer with 50–1k Hz, Q 0.5–2, and Gain ±12. The bandwidth with filters disabled is 10–55k Hz, the damping factor is 500, and the signal-to-noise ratio is 103 dB. Connections are made via PRE IN, and a Pre-out Full-Range is available. The sensitivity of the preamplifier input is 0.3–5 VRMS (15 k Ω). The dimensions are 544 x 240 x 65.5 mm, and the weight is 7.5 kg. Distortion is 0.05% (100 Hz @ 4 Ω), Remote input 7–15 V DC with 1 mA.
- 2-Channel Amplifier
- Class AB
- Channels 2–1
- Oversized Power Supply
- Four toroidal transformers
- INPUTS PRE IN
- Pre-out Full-Range
- Adjustable crossovers
- Hi-Pass 50–1k Hz or 500–10k Hz
- Lo-Pass 50–1k Hz or 500–10k Hz
- Bandpass 50–10k Hz (HI) and 50–10k Hz (LO)
- Equalizer 50–1k Hz, Q 0.5–2, Gain ±12
- Size 544 x 240 x 65.5 mm
- Weight 7.5 kg
- Supply voltage 11–15 V DC
- 4 x 30 A
- Idle current (on/off) 0.04 mA
- Consumption at 1 Ohm, 14.4 V DC (max. music power) 100 A
- Remote input 7–15 V DC, 1 mA
- Distortion (100 Hz @ 4 Ohm) 0.05%
- Bandwidth (filters off) 10–55k Hz
- Signal-to-noise ratio (A weighted @ 1 V) 103 dB
- Damping factor (100 Hz @ 4 Ohm) 500
- Pre-In sensitivity 0.3–5 VRMS (15 k Ω)
- Load impedance (min) 1 Ohm (2 channels)
- Load impedance (min) 2 Ohms (1 channel)
- Output power RMS @ 14.4 V DC, THD 1% 330 W x 2 (4 Ohm)
- Output power RMS @ 14.4 V DC, THD 1% 550 W x 2 (2 Ohm)
- Output power RMS @ 14.4 V DC, THD 1% 800 W x 2 (1 Ohm)
- Output power RMS @ 14.4 V DC, THD 1% 1100 W x 1 (4 Ohm)
- Output power RMS @ 14.4 V DC, THD 1% 1600 W x 1 (2 Ohm)
- Output power RMS @ 14.4 V DC, THD 10% 380 W x 2 (4 Ohm)
- Output power RMS @ 14.4 V DC, THD 10% 630 W x 2 (2 Ohm)
- Output power RMS @ 14.4 V DC, THD 10% 900 W x 2 (1 Ohm)
- Output power RMS @ 14.4 V DC, THD 10% 1260 W x 1 (4 Ohm)
- Output power RMS @ 14.4 V DC, THD 10% 1800 W x 1 (2 Ohm)
- Total power RMS 1800 Watts
- Size A 544 mm
- Size B 524 mm
- Size C 240 mm
- Size D 182 mm
- Size E 65 mm
