Audison Great APS 10 D

Beschreibung

The APS 10 D is designed to deliver maximum power in a closed enclosure with an ultra-compact volume of 10 to 12 liters. The dual voice coil and single voice coil versions feature push-in connectors for easy wiring and configurations. The Prima subwoofer components have been designed with one primary goal: to deliver high power in the smallest possible space. Power is a question of excursion; the more air the cone moves, the more level. However, a low installation depth traditionally means low excursion. Prima subwoofers use a special cone-dust cap-basket geometry that guarantees a large excursion of the mobile group while reducing the installation depth to a minimum. The surround and the centering spider have been carefully designed to prevent the "rocking mode" phenomenon. The cooling circuit has been designed with vents on the basket below the spider, eliminating the need for vents on the base plate. This allows the subwoofer to be mounted close to the rear wall of the cabinet, making optimal use of the small installation depth.

TECHNICAL DATA

• size 250 mm
• load capacity - peak 800 W
• Load capacity - continuous operation 400 W
• impedance 4.4 ohms
• Magnet material HIGH DENSITY FLUX FERRITE
• voice coil Ø 60 mm
• woofer Qes 0.58
• Cone material WATER REPELLENT PRESSED PAPER
• Xmax 12.6 mm
• Xmech 18 mm

ELECTRO-ACOUSTIC PROPERTIES

• D 220 mm
• Driver displacement volume 1.12
• Re 2.2 Ohm
• Fs 27 Hz
• Vas 41 l
• Mms 170 g
• Cms 0.2 mm/N
• BL 10.4 T•m
• Qms 4.7
• Qts 0.52
• Le Standard 1.5 mH
• Spl 84 dB

GENERALLY

• Weight 5.24 kg

DIMENSIONS

• Dimension A 270 mm
• Dimension B 233 mm
• Dimension C 105 mm
• Dimension D 88 mm

CHARACTERISTICS

• Ultra-flat profile (120 mm) for maximum installation flexibility. 
• Designed for maximum performance in a sealed housing with start function
  of 10 liters
• Specially developed cone-dust cap-basket geometry, which
  long linear deflection (11 mm, one-sided) while maintaining the
  Installation depth to minimum.
• Ventilation holes on the basket under the spider, eliminating the need for
  The central ventilation opening allows installation near the rear wall of the housing.
• Massive engine assembly, optimized with FEM (Finite Element Modeling)
  for perfect control under high power and large displacement conditions.
• Water-repellent, pressed paper, 10 inch cone, with a developed profile
  with FEM simulation and optimized with the Klippel Scan Vibrometer.
• Dual voice coil design, specifically developed for combination with either
  AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D
  (2 CH bridged) amplifier.
• Includes steel grille and plastic seal.