100 WATT RMS

ESX Vision VE1300.11SP

11-channel DSP amplifier

1.499,00€

/Stück

(/)

Inkl. MwSt. Exkl. MwSt. inkl. Versandkosten exkl. Versandkosten

skonto Nur 1.424,05€ mit  5% Skonto 5% Skonto bei: Vorkasse

Du sparst 5% auf diesen Artikel, indem du beim Bestellvorgang die Zahlungsart Vorkasse (Banküberweisung) wählst Der Rabatt wird automatisch abgezogen!

Available, in 2-5 days with you

Vollständige Lieferbedingungen

Günstiger gesehen?

„Wir halten mit - garantiert!" Nutze die Tiefpreisgarantie! Wenn du einen Artikel auf einer Internetseite innerhalb der EU günstiger findest, ziehen wir mit dem Preis der Konkurrenz gleich und legen einen Artikel aus unserem Zubehörsortiment bei.

Die Menge überschreitet den verfügbaren Bestand.
paypal master visa klarna amazon payments scalapay
Beschreibung

    The  Vision VE1300.11SP is an 11-channel DSP amplifier that shines with its impressive power of 9 x 100 watts RMS at 4 ohms and an additional 2 x 200 watts RMS at 2 ohms. With low noise and minimal THD distortion, the Vision VE1300.11SP impresses across the board. ESX has also integrated a high-quality 12-channel DSP and Bluetooth into this product. Perfect for complex sound systems and extremely powerful to drive even larger subwoofers. With the Vision VE1300.11SP, your car becomes a top-class sound stage.

Characteristics

    • Analog Devicesâ„¢ DSP chip, ADAU1452 dual 2 x 32 bit processor, 294 MHz, Full HD audio 96 kHz
    • AKM Velvet Soundâ„¢ Series 5 signal converter, A/D 32 bit, D/A 32 bit
    • HP/LP/BP @ 6-48 dB, phase shift, time correction 0 ~ 20 ms / 0.01 ms steps
    • Input mixer, subwoofer control, priority input mode for digital input signals
    • DSP control via ESX DSP Toolkit
    • - PC software for Microsoft® Windowsâ„¢ 10 or newer
    • Integrated Bluetooth® Receiver including antenna for controlling the DSP via app and Full HD audio streaming
    • Bluetooth version 5.0, profiles: A2DP/AVRCP, codecs: aptX, aptx LL, aptX HD, AAC, SBC
    • REM OUT function for external devices, MODE switching input for e.g. convertible tops (Preset Auto Switch)
    • Optional accessory: RC-DQ (LCD remote control)

Technical data 

    • Class D 11-channel amplifier 
    • Digital Full HD Audio 12-channel signal processor
    • 9 x 100 watts RMS @ 4 Ω + 2 x 200 watts RMS @ 2 Ω
    • Frequency response 5 ~ 45,000 Hz
    • Signal-to-noise ratio (A-weighted) 106.5 dB
    • THD 0.005% @ 1 Watt RMS, 0.003% @ 5 Watt RMS
    • Operating voltage 7.5 ~ 17 V
    • Dimensions 284 x 54 x 181 mm
    • Inputs:
      • 8 x RCA/Cinch input, balanced (via Molex connector)
      • 8 x high-level input (via Molex connector)
      • 1 x Optical stereo, S/PDIF 192 kHz, 24 bit
      • 1 x Bluetooth® stereo input via audio streaming
      • 1 x USB Type Mini B for PC software
      • 1 x RJ45 for remote control/extension
      • 1 x connection incl. REM IN/OUT & Mode Preset switching input
      • Input sensitivity low level 500 mV ~ 6 V
      • Input sensitivity high level 2 ~ 15 V or 15 ~ 40 V (switchable)
      • Input resistance low level 10 kΩ
      • Input resistance high level 10/150/600 Ω (switchable)
      • Automatic switch-on function DC / VOX / OFF
    • Outputs:
      • 9 x Amplified speaker output (via Molex connector)
      • 2 x Amplified speaker/subwoofer output (via Molex connector)
      • 1 x subwoofer output (RCA/Cinch via Molex connector)
      • 1 x switching output for external fan +12V