If you want to replace your factory radio with an aftermarket radio, it is advisable to retain the original steering wheel remote control functions.

However, please note that depending on the vehicle equipment as well as the functionality and software of the retrofit device, certain operating functions may be omitted or replaced by other functions.

Compare the illustrated plugs of the adapter with those in your vehicle and ensure that they fit both visually and technically.

Please also check if one of the specified original factory radios was installed in your vehicle.

Before the final assembly, we recommend that you check the functions of your vehicle, the vehicle settings, and the steering wheel remote control for their functionality to ensure that everything works perfectly.

Note

• CAN Bus
• Connection: 40 Pin Quadlock Citroen/Peugeot Connector
• Vehicles with RD4 / RT4 / RD45 1-DIN OEM device
• Vehicles without Bosch OEM device
• Vehicles without Magneti Marelli RT3 / RT6 / Harman Becker OEM Navigation
• Vehicles without JBL OEM sound system
• vehicle settings with SWC supported (look into the manual)
• Vehicles with PDC additionally > Article: can-pdc
• Vehicles with ECO mode > +12V continuous power battery secured

Suitable for the following vehicles

• Citroen
• Citroën Berlingo (7) 06/2008 - 03/2012
• Citroën Berlingo (7) 04/2012 - 05/2015
• Citroën Berlingo (7) 06/2015 - 06/2018
  
  
• Citroën C2 (J) 12/2004 - 12/2009
• Citroën C3 (F) 10/2005 - 01/2010
• Citroën C3 (S) 01/2010 - 01/2017
• Citroën C4 (L) 11/2004 - 08/2010
• Citroën C5 (D) 10/2004 - 04/2008
• Citroën C8 (E) 01/2008 - 07/2012
• Citroën C8 (E) 07/2012 - 06/2014
• Citroën DS3 (S) 03/2010 - 07/2014
• Citroen Jumpy (X) 02/2007 - 05/2016
• Citroen Nemo (A) 08/2008 - 12/2015
• Citroen Xsara Picasso (C) 03/2004 - 02/2010
• Fiat
• Fiat Scudo (ZAF 270) 02/2007 - 07/2016
• Peugeot
• Peugeot 207 (WC) 06/2006 - 06/2009
• Peugeot 207 (W) 06/2009 - 07/2015
• Peugeot 208 (C) 04/2012 - 04/2015
• Peugeot 307 (3/ 3 Break/ 3 SW/3 CC) 06/2005 - 03/2009
• Peugeot 308 (4/4 GTI/4 SW/4 CC) 09/2007 - 07/2015
• Peugeot 407 (6/6 SW/6 Coupe) 05/2004 - 07/2008
• Peugeot 407 (6/6 SW/6 Coupé) 02/2006 - 03/2011
• Peugeot 807 (E) 07/2002 - 02/2008
• Peugeot 807 (E) 07/2002 - 02/2008
• Peugeot 807 (E) 02/2008 - 06/2014
• Peugeot 3008 (oU) 06/2009 - 10/2013
• Peugeot 5008 Van (O) 10/2009 - 10/2013
• Peugeot Bipper (A) 12/2007 - 12/2015
• Peugeot Expert (X) 02/2007 - 08/2016
• Peugeot Partner (7) 05/2008 - 03/2012
• Peugeot RCZ (4J) 04/2010 - 09/2015
• Peugeot 3008 (oU) 06/2009 - 10/2013
• Peugeot 5008 Van (O) 10/2009 - 10/2013
• Peugeot Bipper (A) 12/2007 - 12/2015
• Peugeot Expert (X) 02/2007 - 08/2016
• Peugeot Partner (7) 05/2008 - 03/2012
• Peugeot RCZ (4J) 04/2010 - 09/2015
• Toyota
• Toyota Proace 03/2013 - 08/2016

The following signals are provided.

• Reimport vehicles or vehicles with differing software may be incompatible in functions.
• +12V ignition terminal 15
• +12V Lighting Terminal 58
• +12V reverse signal
• speed signal
• Load capacity total outputs: 200 mA max.
• Load capacity single output: 180 mA max.
• Current demand greater than 180 mA
• 1 Relay Coil Resistance 75 Ohm min.
• 2 Relay Coil Resistance 150 Ohm min.
• steering wheel remote control
• Vehicle settings supported

Connection cable for the following radio manufacturers

• LFB Speedsignal Cable > Blaupunkt/Kenwood/Pioneer 12 Pin: 42c-3414101
• LFB Speedsignal Cable > Kenwood 12 Pin: 42c-3414104
  
• LFB Speedsignal Cable > Alpine 12 Pin: 42c-3414105
• LFB Speedsignal Cable > Sony/Phonocar 12 Pin: 42c-3414107
• LFB Speedsignal Cable > Alpine I2C 12 Pin: 42c-3414115
• LFB Speedsignal Cable > Blaupunkt/China HU/Kenwood 12 Pin: 42c-3414124
• LFB Speedsignal Cable > Clarion 12 Pin: 42c-3414127
• LFB Speedsignal Cable > JVC 3.5mm Jack 12 Pin: 42c-3414128
• LFB Speedsignal Cable > Zenec II Lead 12 Pin: 42c-3414129
• LFB Speedsignal Cable > Zenec I Lead 12 Pin: 42c-3414130
• LFB Speedsignal Cable > JVC 1 Lead 12 Pin: 42c-3414140

General Installation Instructions

• Review
• 1: Review of all operating functions and vehicle adjustment functions of the OEM device
• 2: Carry out the disassembly of the OEM device without voltage.
• 3: Check all interface connections for correctness and continuity without voltage.
• Connection and connection sequence
• 1: Make settings and hardware configuration of the interface without voltage.
• 2: Check configuration of the radio connection cable
• 3: Connect the radio connection cable according to the operating instructions of the retrofit device.
• 4: Connect all other connections according to the operating instructions of the retrofit device.
• 5: Connection of the entire installation to the vehicle with live connection last
• 6: Software configuration of the interface according to the instructions in the article text and in the BDA
• 7: Configuration of the retrofit device according to the operating instructions of the retrofit device steering wheel remote control/camera/telephone hands-free system/antenna phantom power supply and more
• 8: Function test steering wheel remote control and vehicle
• Changes to the hardware configuration of the interface and the radio connection cable
• 1: Carry out changes without tension
• 2: Connection after change see above 5 to 8
• In case of malfunction of the interface or the vehicle
• 1: Reversion to the OEM device
• 2: Operate OEM device
• 3: Establish CAN Bus idle
• 4: Review of the hardware configuration of the interface
• 5: Connection to CAN Bus idle see above 5 to 8
• The connections, connection changes, alternative connections, connections of loose cables, or connection extensions of loose cables specified in the instructions or the operating manual are intended solely for orientation and information for trained professional personnel.
• Further connections, changes to the cable configuration of the wiring harness, or use of alternative connections or connection extensions.
• 1: Connections and modifications are to be carried out exclusively by trained professionals.
• 2: Connections and modifications must be checked for any manufacturer approvals or any manufacturer warranty conditions that may be affected by the modifications before connection.
• 3: Connections and modifications must be checked for functionality and accuracy before connection by measuring and by matching against the vehicle's wiring diagram.
• 4: Connections and modifications are made at your own risk without guarantee of functionality.
• 5: Connections and modifications are made at your own risk without any guarantee against damage to the vehicle, the retrofit device, or the interface.
• 6: Modifications to the pre-assembled wiring harness may result in the expiration of the product's warranty.