ACV LFB Citroen 40Pin Quadlock RD4 Gerät steering wheel remote control

Max, Mikael and 53k+ customers already with Masori sound upgrade

ACV LFB Citroen 40Pin Quadlock RD4 Gerät steering wheel remote control

Impedance of the relays: 75 Ohm min. for one relay, 150 Ohm min. for two.
Load capacity of the total outputs: maximum 100 mA current requirement.
PDC support for Citroën/Fiat with RD4 OEM device and 40 pin Quadlock.
Mehr technische Details

€99,00

~~€99,00~~ €99,00

5% Rabatt mit Vorkasse

inkl. VAT , possibly plus shipping

Bequem in 12 zinsfreien Raten à €8,25 mit Klarna zahlen.

Jetzt mit kostenlosem Versand ab 50€!

Shipping cost calculator

Land/Region

PLZ

Garantie & zusätzlicher Geräteschutz für dein HiFi-System

3 Jahre Masori Garantie Kostenlos 48 Monate Plusgarantie €14,99 60 Monate Plusgarantie Am beliebtesten €19,99

Deshalb wählen uns 100.000+ Kunden

3 Jahre Garantie

Sicher & sorglos
Blitzversand

mit DHL Express
Tiefpreisschutz

Nie zu viel zahlen

Rob

Max

Unsicher, ob dieses Produkt zu deinem Auto passt?

Wir helfen dir – schnell, persönlich und unverbindlich.

Antwort on weekdays within 24h

ACVLFB Citroen 10Pin/28Pin Toyota AUX/USB

ACVLFB BMW/Mini 40Pin Quadlock CAN Bus

LFB Citroen 40Pin Quadlock RD4 Gerät by ACV

If you want to replace your factory radio with an aftermarket radio, make sure to retain the original steering wheel remote control functions.

"However, it is possible that depending on the vehicle equipment as well as the functionality and software of the retrofit device, individual operating functions may be omitted or replaced by other functions."

Compare the illustrated plugs of the adapter with those in your vehicle and ensure that they fit visually and technically.

Please also check if one of the specified original factory radios was installed in your vehicle.

Before the final assembly, we recommend that you check the functions of your vehicle, the vehicle settings, and the steering wheel remote control for their functionality.

Note

CAN-Bus

Connection: 40 Pin Quadlock Citroen / Peugeot Connector
Vehicles with Blaupunkt / Continental / Siemens VDO RD4 OEM device with volume control knob
Vehicles without Continental RD5 OEM CD-Tuner Silverbox
Vehicles without Continental RD45 OEM device with volume control knob**
Vehicles without Magneti Marelli RT3 / RT6 / Harman Becker OEM Navigation Vehicles without JBL OEM Sound System
Vehicle settings supported (see user manual)
Vehicles with ECO mode > +12V permanent power connection terminal 30 battery fused
Vehicles with PDC additionally > can-pdc*

Suitable for the following vehicles

Citroën

Citroën Berlingo (7) 06/2008 - 03/2012
Citroën Berlingo (7) 04/2012 - 05/2015
Citroën Berlingo (7) 06/2015 - 06/2018
Citroën C2 (J) 12/2004 - 12/2009
Citroën C3 (F) 10/2005 - 01/2010
Citroën C3 (S) 01/2010 - 01/2017
Citroën C4 (L) 11/2004 - 08/2010
Citroën C5 (D) 10/2004 - 04/2008
Citroën C8 (E) 01/2008 - 07/2012
Citroën C8 (E) 07/2012 - 06/2014
Citroën DS3 (S) 03/2010 - 07/2014
Citroen Jumpy (X) 02/2007 - 05/2016
Citroen Nemo (A) 08/2008 - 12/2015
Citroen Xsara Picasso (C) 03/2004 - 02/2010

Fiat

Fiat Scudo (ZAF 270) 02/2007 -07/2016

Toyota

Toyota Proace 03/2013 - 08/2016

The following signals are provided.

Reimport vehicles or vehicles with differing software may be incompatible in functions.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reverse signal
rosa: speed signal
green: mass GND handbrake signal
Load capacity total outputs: 100 mA max.
Current demand greater than 100 mA

1 Relay Coil Resistance 75 Ohm min.
2 Relay coil resistance 150 Ohm min.

steering wheel remote control
Vehicle settings supported

*Vehicles with RD4 OEM device / PDC LFB Citroen/Fiat various vehicles 40Pin Quadlock PDC > Article: 42sct008
**Vehicles with RD45 OEM device LFB Citroen/Fiat/Peugeot/Toyota 40 Pin Quadlock > Article: 42b-3444741

Connection cable for the following radio manufacturers

LFB Cable 42s/acv > Alpine Jack: 42ctalpinelead
LFB Cable 42s/acv > Parrot 4 Pin: 42ctasteroidlead
LFB Cable 42s/acv > Bosch-Blaupunkt >2010 Mini ISO: 42ctblaupunktlead
LFB Cable 42s/acv > Blaupunkt/China HU/Kenwood 3 Cable: 42ctchinahulead
LFB Cable 42s/acv > Clarion Jack: 42ctclarionlead
LFB Cable 42s/acv > JVC 1 Cable/Jack: 42ctjvclead
LFB Cable 42s/acv > Kenwood 1 Cable: 42ctkenwoodlead
LFB Cable 42s/acv > Multilead various devices: 42ctmultilead
LFB Cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead3
LFB Cable 42s/acv > Multilead various devices/Pioneer 2022>: 42ctmultilead5
LFB Cable 42s/acv > Panasonic 1 Cable: 42ctpanasoniclead
LFB Cable 42s/acv > Blaupunkt/Kenwood/Pioneer Jack: 42ctpioneerlead
LFB Cable 42s/acv > Pioneer AVH/DMH/SPH 2022> Loose jack: 42ctpioneerlead2
LFB Cable 42s/acv > Devices with LFB learning function: 42ctsmartlead
LFB Cable 42s/acv > Blaupunkt/Kenwood/Sony Jack: 42ctsonylead
LFB Cable 42s/acv > XZent/Zenec 1 Cable: 42ctzeneclead

General Installation Instructions

Connection and connection sequence

1: Make settings and configuration of the interface without voltage.
2: Check the configuration of the radio connection cable
3: Connect the radio connection cable according to the operating instructions of the retrofit device.
4: Connect all other connections according to the operating instructions of the retrofit device.
5: Connection of the overall installation to the vehicle with live connection last.
6: Configuration of the retrofit device according to the operating instructions of the retrofit device steering wheel remote control/camera/telephone hands-free system/antenna phantom power supply and more

Changes to the configuration of the interface and the radio connection cable

1: Carry out changes without voltage
2: Connection after change see above 5 and 6

The connections, connection changes, alternative connections, connections of loose cables, or connection extensions of loose cables specified in the instructions or the operating manual are intended solely for orientation and information for trained professional personnel.
"Connections, changes to the cable configuration of the wiring harness, or use of alternative connections or connection extensions"

1: Connections and modifications are to be carried out exclusively by trained professionals.
2: Connections and modifications must be checked for any manufacturer approvals or any manufacturer warranty conditions that may be affected by the modifications before connection.
3: Connections and modifications must be checked for functionality and accuracy before connection by measuring and by matching against the vehicle's wiring diagram.
4: Connections and modifications are made at your own risk without any guarantee of functionality.
5: Connections and modifications are made at your own risk without any guarantee against damage to the vehicle, the retrofit device, or the interface.
6: Changes to the pre-assembled wiring harness will void the product warranty.

ACV LFB Citroen 40Pin Quadlock RD4 Gerät Datenblatt

Datenblatt öffnen

Frequent questions about LFB Citroen 40Pin Quadlock RD4 Gerät

Welche Fahrzeugmodelle sind mit dem LFB Citroen 40Pin Quadlock RD4 Gerät kompatibel?

The LFB Citroen 40Pin Quadlock RD4 device from ACV is compatible with a variety of vehicle models. This includes, among others, Citroën models such as the Berlingo (from 2008 to 2018), C2, C3, C4, C5, C8, DS3, Jumpy, Nemo, Xsara Picasso, as well as Fiat Scudo and Toyota Proace. It is important that the 40 Pin Quadlock connection is present and that the vehicle is equipped with a Blaupunkt, Continental, or Siemens VDO RD4 OEM device. The device is not suitable for vehicles with certain JBL or Magneti Marelli systems. Check the specific model compatibilities in the product description.

Wie überprüfe ich die Kabelkompatibilität des LFB Citroen 40Pin Quadlock RD4 Geräts?

To ensure the cable compatibility of the LFB Citroen 40Pin Quadlock RD4 device, you should first compare the illustrated connectors of the adapter with the connections in your vehicle. It is important that the connectors match both visually and technically. Before final assembly, it is recommended to test all functions of the vehicle as well as the correct operation of the steering wheel remote control. This step ensures that all connections are correct and that no functions are lost due to incompatibilities. In the user manual, you will find detailed installation instructions for the connection cables.

Welche Signale stehen beim Anschluss des LFB Citroen 40Pin Quadlock RD4 Geräts zur Verfügung?

The LFB Citroen 40Pin Quadlock RD4 device offers various signals for connection. The provided signals include a +12V ignition connection (terminal 15), +12V lighting connection (terminal 58), a reverse signal, a speed signal, and the ground connection (GND). Additionally, there is a handbrake signal. With a total output capacity of a maximum of 100 mA, the current demand should not exceed 100 mA. Two coil resistances of at least 75 and 150 Ohms are required for certain relay operations. These signals support integration into your existing vehicle network.

Wie erfolgt die richtige Installation des LFB Citroen 40Pin Quadlock RD4 Geräts?

The installation of the LFB Citroen 40Pin Quadlock RD4 device requires several steps. First, you configure the interface without power and check the radio connection cable. Then, you connect all the connections according to the user manual. The interface is finally connected to a powered connection. Any changes to steering wheel remote controls, cameras, or hands-free devices should be carried out without power. Changes to the pre-assembled wiring harness may affect warranty claims. The detailed installation manual provides precise information on the correct cable connection and configuration to operate the product without errors.

Welche Funktionen sind mit dem LFB Citroen 40Pin Quadlock RD4 Gerät möglich?

The LFB Citroen 40Pin Quadlock RD4 device supports a variety of functions, including the integration of the steering wheel remote control. Vehicle settings are also supported, ensuring seamless operation. It is important to check the compatibility of the software of the retrofit device, as some functions may be omitted or replaced depending on the equipment. Vehicles in ECO mode require a +12V permanent power connection (terminal 30). For specific configurations such as use with PDC, an additional CAN bus connection may be required. You can find all the details in the device's user manual.

Welche Radiohersteller sind mit dem LFB Citroen 40Pin Quadlock RD4 Gerät kompatibel?

The LFB Citroen 40Pin Quadlock RD4 device is compatible with various radio manufacturers, including Alpine, Parrot, Bosch-Blaupunkt, Kenwood, Clarion, JVC, Panasonic, Sony, XZent, and Zenec. Compatibility is ensured through specific connection cables. The item numbers for the respective cables are listed in the product description, such as the Alpine cable (42ctalpinelead) or the Kenwood cable (42ctkenwoodlead). When installing, it is important to check the configuration of the radio connection cable according to the user manual of the aftermarket device to ensure that everything is connected correctly.

Wie wird die Funktionalität der Lenkradfernbedienung sichergestellt?

To ensure the functionality of the steering wheel remote control when switching to the LFB Citroen 40Pin Quadlock RD4 device, it is essential to check the functions of your vehicle, including the remote control, before final assembly. All vehicle functions should be correctly switched to the aftermarket radio, with some functions possibly omitted or replaced by others depending on the vehicle's equipment. Also, check that all connections are properly secured. Note that the setup should only be carried out by trained professionals to prevent possible incompatibilities.

Welche Besonderheiten sind beim CAN-Bus Anschluss zu beachten?

The CAN bus connection on the LFB Citroen 40Pin Quadlock RD4 device requires specific prerequisites. Vehicles with Blaupunkt, Continental, or Siemens VDO RD4 media technology are compatible. However, those with Continental RD5 or RD45 devices, Magneti Marelli RT3/RT6, or Harman Becker navigation are excluded. Before connecting, it must be checked whether the vehicle settings are compatible with the CAN bus. Vehicles in ECO mode also require a specially secured +12V permanent power connection. The CAN bus allows for a networked control that is specifically tailored to compatibility with vehicle functions.

Welche Anschlusskabel-Optionen gibt es für das LFB Citroen 40Pin Quadlock RD4 Gerät?

Various connection cables are available for the LFB Citroen 40Pin Quadlock RD4 device. These connect the device to radios from Alpine, Parrot, Bosch-Blaupunkt, Kenwood, Clarion, JVC, Sony, and other manufacturers. The item numbers of the cables are, for example, 42ctalpinelead for Alpine or 42ctkenwoodlead for Kenwood. Each cable is specifically tailored to the requirements of the respective radio manufacturer. The selection of the appropriate connection cable depends on the model-dependent structure of the connector system, which is described in more detail in the user manual of the retrofit radio. A thorough check of cable compatibility can prevent installation issues.

Wie beeinflusst der Anschluss des LFB Citroen 40Pin Quadlock RD4 Geräts die Fahrzeugeinstellungen?

The connection of the LFB Citroen 40Pin Quadlock RD4 device can affect the vehicle settings. The integration of the device supports the steering remote control and the PDC function by default. However, it is advisable to check the vehicle settings for their configuration with the aftermarket radio before installation. Vehicles must not be directly connected to an unsecured power supply source in ECO mode; a secured +12V constant power connection is crucial. Additionally, caution is advised with differing software versions or re-imported vehicles, as compatibility may be limited. Always consult the user manual for more detailed information.

Herstellerinformation/verantwortliche Person

acv GmbH
Straßburger Allee 10-12
41812 Erkelenz
Germany
Represented by:
Thomas Landmesser, Hendrik Frentzen

Contact: info@acvgmbh.de

Let customers speak for us

from 9066 reviews

Artiomrusanovschi

👌

👌 superr

Machete Fight MF-15R

12/13/2025

Franco

Super guter Subwoofer

Super Subwoofer mit extrem tiefem Bass. Die Kabel sind dick und hochwertig verarbeitet. Es gibt nichts zu beanstanden. Absolut empfehlenswert.

CBP1000

12/09/2025

Jean François Tedesco

Alpine tube 12 bazooka , Un sacré caisson de basses ,

Un sacré caisson de basses , j'ai eu un 46 cm killer 454 de l'époque année 90 , qui tapait vraiment bien , mais ce tube est bien plus fort et plus ample, toutes les basses passent sans problème, avec une télécommande à réglage multiples taramps eq bass , et un ampli Machete de masori , le couple est parfait, personnellement j'en ai deux tubes et ça donne énormément, avec l'ampli 2 x 530 en 4 ohms . Parfois le plus simple est bien meilleur et plus durable .

SWT-12S4

11/29/2025

Bartosz Erber

X-10 v3 d2

Hallo. Sehr freundlicher Kundenservice und schnelle Auftragsabwicklung. Der Lautsprecher ist brandneu und unbenutzt. Ich habe ihn vor einiger Zeit gekauft, aber erst kürzlich das Gehäuse fertiggestellt. Die Parameter entsprechen den Herstellerangaben: 42,5 Liter Nettovolumen, abgestimmt auf 32 Hz und 21 mm starkes Sperrholz. Ich hatte noch nie einen 10-Zoll-Lautsprecher und wusste nicht, was mich erwartet, aber das Ergebnis hat meine kühnsten Erwartungen übertroffen. Der Bass aus einem so kleinen Lautsprecher in einem so kleinen Gehäuse ist einfach unglaublich. Um den X-10 zu kaufen, habe ich meinen DD 712f in einem 70-Liter-Gehäuse verkauft, und der war ein Volltreffer. Der Sundown ist in jeder Hinsicht besser. Ich kann diesen Lautsprecher und den Händler, bei dem ich ihn gekauft habe, wärmstens empfehlen. Beste Grüße.

X10 v3

11/18/2025