Prima AFBMW ReAMP 3

Prima AFBMW ReAMP 3

Technical Highlights

Compatible with 676 HiFi package, Audison AF bit amplifier.
2Ω woofer, requires adjustments, 4Ω replacement.
Hi-Level Input, Bit Drive Wizard Configuration.
More technical details

€65.55

-5% ~~€69.00~~ €65.55

2% discount with credit card

including VAT

Free shipping for this item!

datasheet

Audison-Prima AFBMW ReAMP 3-DSP-Zubehör-masori-kaufen

€65.55

~~€69.00~~ €65.55

Prima AFBMW ReAMP 3 is DSP Accessories from Audison. It is compatible with the 676 HiFi audio package with RAM module as well as with the Audison AF-Bit amplifier. 676 HiFi systems use 2 Ohm woofers; bridging two channels with a 2 Ohm load is not intended. For a bridged channel, Audison APBMW S8-4.2 4 Ohm woofers should be used. For signal routing, the Hi-Level input configuration #11 (2-way front + rear + center) is used in the Bit Drive Wizard. APBMW ReAMP 1, APBMW ReAMP 2, and AFBMW ReAMP 3 use identical plugs, but with different pin assignments and are not interchangeable. Using with other products may require modifications and additional connections in the vehicle; proper application must be confirmed.

Features

DSP Accessories
Compatible with 676 HiFi audio package with RAM module
Compatible with Audison AF-Bit amplifier
Plug identical to APBMW ReAMP 1 and APBMW ReAMP 2, different pin assignment; not interchangeable
Using with other products may require changes and additional vehicle connections
Confirm proper application

Technical Specifications

Impedance OEM woofers (676 HiFi systems): 2 Ohm
Required impedance for bridged channel: 4 Ohm (Audison APBMW S8-4.2)
Bridging note: do not bridge two channels with 2 Ohm load
Hi-Level input configuration: #11 (2-way front + rear + center) in the Bit Drive Wizard

Frequently Asked Questions about Prima AFBMW ReAMP 3

What technical features does the Audison Prima AFBMW ReAMP 3 have?

The Audison Prima AFBMW ReAMP 3 is a DSP Accessories designed specifically for compatibility with the 676 HiFi audio package and the Audison AF-Amplifier. It is important to note that this product operates with built-in RAM modules and may require adjustments for use with other systems. The recommended Hi-Level input configuration #11 (2-way front + rear + center) is essential to correctly route the input signal to the bit processor. The unique plugs of the ReAMP series, although visually identical, have different pin configurations and are not interchangeable, requiring careful application.

How do I set up the Audison Prima AFBMW ReAMP 3 correctly?

To correctly set up the Audison Prima AFBMW ReAMP 3, it is necessary to adhere to the specifications of the 676 HiFi audio package and the Audison AF-Amplifier. An important component is the use of the Hi-Level input configuration #11 to ensure that the input signal is properly routed to the bit processor. During the installation process, it is important to ensure that the pin configurations of the cables and plugs meet the specific standards to guarantee compatibility and operational safety. A mismatch may result in signal interruptions or damage to the device.

Can I bridge two 2Ω channels with the Audison Prima AFBMW ReAMP 3?

No, two 2Ω channels must not be bridged with the Audison Prima AFBMW ReAMP 3. Using 2Ω woofers requires special attention, as an incorrect bridging configuration can lead to a protection shutdown or even damage to the amplifier. To efficiently use a bridged channel, the OEM 2Ω woofers must be replaced with the Audison APBMW S8-4.2 4Ω woofers. The correct bridging wiring must always be checked to ensure that the system operates without malfunctions.

Which speakers are compatible with the Audison Prima AFBMW ReAMP 3?

The Prima AFBMW ReAMP 3 is optimized for use with 4Ω speakers, especially when bridged channels are to be used. OEM 2Ω woofers must be replaced with Audison APBMW S8-4.2 4Ω woofers to ensure optimal sound quality and system stability. This product adjustment is essential for efficiently using the Audison AF-Bit Amplifier. When selecting speakers, the impedance must be taken into account to avoid protection shutdowns or potential damage to the amplifier.

Why is the pin configuration of the Prima AFBMW ReAMP 3 so important?

The pin configuration of the Prima AFBMW ReAMP 3 is crucial because, despite identical plugs within the ReAMP series, different configurations exist. These nuances in wiring directly affect compatibility with different systems and overall functionality. If the pins are incorrectly configured, it can lead to signal loss or short circuits. During installation, it must be carefully checked that each connection is linked to its correct counterpart to maintain the integrity of the audio signal and ensure the efficient operation of the Audison DSP Accessories.

How does the Prima AFBMW ReAMP 3 affect the sound in my BMW?

The Prima AFBMW ReAMP 3 from Audison is designed to significantly enhance audio quality in vehicles with the 676 HiFi audio package. With compatibility with the Audison AF-Bit Amplifier, you will experience a more precise and powerful sound, especially when you replace the OEM 2Ω woofers with Audison APBMW S8-4.2 4Ω woofers. This adjustment allows the amplifier to fully utilize its capabilities, resulting in clearer and more dynamic music playback. Music lovers will particularly appreciate the improved audio quality at high volumes.

Does the Prima AFBMW ReAMP 3 have specific installation requirements?

Yes, some specific preparations are necessary for the installation of the Prima AFBMW ReAMP 3. In addition to using the Hi-Level input configuration #11 for proper signal processing, special attention should be paid to ensuring that the correct bridging wiring is set up. Replacing the OEM 2Ω woofers with Audison 4Ω woofers is required for bridged channels. All connections must be carefully checked to guarantee system compatibility. A messy or faulty installation could disrupt the audio processor and impair overall performance.

Can the Prima AFBMW ReAMP 3 be used with Audison APBMW S8-4.2 speakers?

Yes, the Prima AFBMW ReAMP 3 is specifically optimized for use with Audison APBMW S8-4.2 4Ω woofers. When using these speakers, the DSP Accessories unleash their maximum sound optimization capability. Especially with bridged channels, replacing them with these Audison speakers is necessary to minimize the risk of protection shutdowns. This adjustment ensures that the system is optimally tuned and the audio performance in the vehicle is significantly improved. Considering the correct wiring, these speakers can significantly enhance the sound experience.

What signal configuration is recommended for the Prima AFBMW ReAMP 3?

For the Prima AFBMW ReAMP 3, the use of the Hi-Level input configuration #11 is recommended, which consists of a 2-way setup in the front, rear, and a center channel signal. This configuration ensures that the bit processor correctly receives and processes the input signals. In the configuration, all signal paths must be tuned to ensure accurate reproduction. Since different systems have different signal needs, the specific installation situation in the vehicle must always be considered. A correct configuration is crucial for system performance.

Is the Prima AFBMW ReAMP 3 easy to integrate into a BMW system?

Integrating the Prima AFBMW ReAMP 3 into a BMW system with the 676 HiFi audio package is relatively straightforward if the specific requirements are observed. In addition to the previously mentioned necessity of replacing 2Ω woofers with 4Ω components, the specific pin assignments of the ReAMP 3 are particularly critical. A correct implementation requires care in wiring and signal processing. Once properly installed, the Audison DSP Accessories will enable significantly optimized sound reproduction. The right configuration ensures a seamless listening experience and long-term functionality.

Manufacturer information/responsible person

Elettromedia SpA
62018 Potenza Picena (MC)
Strada Regina km 3,500
Italy

Contact person:
Simone Iampieri
Executive Director Assistant
T +39 0733 870 813
Elettromedia SpA
62018 Potenza Picena (MC) Italy
Strada Regina km 3,500
T + 39 0733 870 870

Contact: simone.iampieri@elettromedia.it