Vehicle Search
Prima APS 10 S4S
Technical Highlights
- Peak power 800W, impedance 4 Ohm, Xmax 12.6mm.
- Compact design, high performance, low installation depth.
- Optimized for AP F8.9 bit, customized housings possible.
- More technical details
Availability for pickups could not be loaded.
Shipping cost calculator
Shipping cost calculator
Rob
Max
Unsure if this product fits your car?
We help you – quickly, personally, and without obligation.
Fill out the form and we'll send you a personalised offer
This product is not universally compatible. Send us your vehicle details and we will check fitment for your model free of charge.
Prima APS 10 S4S by Audison
The Audison Prima APS 10 S4S is a 10-inch (25 cm) Subwoofer with a single 4-ohm voice coil. The design features an ultra-flat profile of 120 mm and is intended for sealed enclosures starting from 10 liters. The power handling is 400 W continuous and 800 W peak. The magnetic system uses High Density Flux Ferrite, and the voice coil measures 60 mm in diameter. The water-resistant treated, pressed paper cone and the cone dust cap basket geometry were developed using FEM and optimized with the Klippel Scan Vibrometer. Xmax is 12.6 mm, Xmech is 18 mm, Fs is 28.5 Hz, Vas is 39.62 liters, and Qts is 0.68. D 220 mm, dimensions A 270 mm, B 233 mm, C 105 mm, and D 88 mm, weight 5.24 kg. Includes steel grille and plastic gasket; basket with venting openings below the spider. Single voice coil design for combination with AP F8.9 Bit (2 CH, bridged, 260 Watts RMS).
- 10-inch (25 cm) Subwoofer
- Single voice coil 4 Ohm
- Ultra-flat profile 120 mm
- Optimized for sealed enclosures starting from 10 liters
- Water-resistant treated, pressed paper cone
- High Density Flux Ferrite magnetic system
- Basket with venting openings below the spider
- Cone dust cap basket geometry, FEM developed and optimized with Klippel
- Massive motor assembly, FEM optimized
- Includes steel grille and plastic gasket
- Single voice coil design for combination with AP F8.9 Bit (2 CH, bridged, 260 Watts RMS)
- Size 250 mm
- Power handling peak 800 W
- Power handling continuous 400 W
- Impedance 4 Ohm
- Voice coil Ø 60 mm
- Cone material water-resistant treated, pressed paper
- Magnet material High Density Flux Ferrite
- Xmax 12.6 mm
- Xmech 18 mm
- D 220 mm
- Re 3.7 Ohm
- Fs 28.5 Hz
- Vas 39.62 liters
- Mms 160 g
- Cms 0.2 mm/N
- BL 12.9 T•m
- Qms 6.9
- Qes 0.75
- Qts 0.68
- Le Standard 1.9 mH
- Spl 83.5 dB
- Driver displacement volume 1.12
- Weight 5.24 kg
- Dimension A 270 mm
- Dimension B 233 mm
- Dimension C 105 mm
- Dimension D 88 mm

