Tang Band's W1-1942S micro full-range speaker offers amazing performance that belies its tiny 46mm diameter (just over 1-3/4"). The patented design uses a unique flower petal polypropylene diaphragm connected to a neodymium motor for maximum BL product in the voice coil gap. A free air resonance of 120 Hz allows you to pair these with almost any woofer or subwoofer up to 9 feet away without localization and radiation effects (poor off-axis response).

Plus, you can use these drivers in multiples for a great line array speaker that requires minimal floor space. Excellent for use in designing micro LCR (left, center, right) speakers for modern HDTV flat panel displays or even computer desk and laptop speakers. The high fidelity of these drivers is illustrated by their low Qts specification (quite rare in drivers of this size), while the ultra-low inductance allows them to reproduce a relatively flat frequency response up to 20,000 Hz! Ferrofluid cooling protects and cools the voice coil, while the mineral-filled polypropylene diaphragm, along with the Santoprene surround, ensures use in harsh environments. The press-fit frame design minimizes center-to-center spacing.

Note: Higher power handling can be achieved by using a 2nd order 150 Hz high pass filter or by using multiple drivers together.

Highlights:

  • Amazing response with extended frequency range from 120 to 20,000 Hz.
  • Perfect for line arrays and modern speaker designs
  • Super-low 0.046 mH inductance and cooled ferrofluid
  • Low 0.24-Qts driver for superior high-fidelity performance
  • Santoprene surround with mineral-filled polycone and press-fit frame

Features:

  • Nominal diameter1" (2.5cm)
  • Power handling (RMS) 4 watts
  • Power handling (max) 8 watts
  • Impedance 4 ohms
  • Frequency response 120 to 20,000 Hz
  • Sensitivity 82 dB 1W/1m
  • Voice coil diameter1".

Parameters:

  • Resonant frequency (Fs) 120 Hz
  • DC resistance (Re) 3.5 Ohm
  • Voice coil inductance (Le) 0.046 mH
  • Mechanical Q (Qms) 1.79
  • Electromagnetic Q (Qes) 0.27
  • Total Q (Qts) 0.24
  • Compliance equivalent volume (Vas) 0.005 ft.³
  • Mechanical compliance of suspension (Cms) 1.37 mm/N
  • BL Product (BL) 3.49 Tm
  • Diaphragm mass Inc. air load (Mms) 1.25g
  • Maximum linear excursion (Xmax) 1.3 mm
  • Surface area of diaphragm (Sd) 9 cm².

Dimensions:

  • Overall outer diameter 1.81 "
  • Baffle cutout diameter 1.67"
  • Depth 0.61"

Enclosure Recommendations:

  • Sealed Volume0.000378 ft.³.
  • Sealed F3 435 Hz
  • Vented volume0.00083 ft.³
  • Vented F3 273.1 Hz
    Rated 5/5 based on 28 customer reviews
    Benedikt Golla - by , Feb 07, 2021

    W1-1942S

    Tang Band W1-1942S Breitbänder
    Tang Band W1-1942S Breitbänder
    Tang Band W1-1942S Breitbänder

    W1-1942S

    Tang Band

    Regular price €27,99

    inkl. MwSt., zzgl. Versand

    Tang Band's W1-1942S micro full-range speaker offers amazing performance that belies its tiny 46mm diameter (just over 1-3/4"). The patented design uses a unique flower petal polypropylene diaphragm connected to a neodymium motor for maximum BL product in the voice coil gap. A free air resonance of 120 Hz allows you to pair these with almost any woofer or subwoofer up to 9 feet away without localization and radiation effects (poor off-axis response).

    Plus, you can use these drivers in multiples for a great line array speaker that requires minimal floor space. Excellent for use in designing micro LCR (left, center, right) speakers for modern HDTV flat panel displays or even computer desk and laptop speakers. The high fidelity of these drivers is illustrated by their low Qts specification (quite rare in drivers of this size), while the ultra-low inductance allows them to reproduce a relatively flat frequency response up to 20,000 Hz! Ferrofluid cooling protects and cools the voice coil, while the mineral-filled polypropylene diaphragm, along with the Santoprene surround, ensures use in harsh environments. The press-fit frame design minimizes center-to-center spacing.

    Note: Higher power handling can be achieved by using a 2nd order 150 Hz high pass filter or by using multiple drivers together.

    Highlights:

    • Amazing response with extended frequency range from 120 to 20,000 Hz.
    • Perfect for line arrays and modern speaker designs
    • Super-low 0.046 mH inductance and cooled ferrofluid
    • Low 0.24-Qts driver for superior high-fidelity performance
    • Santoprene surround with mineral-filled polycone and press-fit frame

    Features:

    • Nominal diameter1" (2.5cm)
    • Power handling (RMS) 4 watts
    • Power handling (max) 8 watts
    • Impedance 4 ohms
    • Frequency response 120 to 20,000 Hz
    • Sensitivity 82 dB 1W/1m
    • Voice coil diameter1".

    Parameters:

    • Resonant frequency (Fs) 120 Hz
    • DC resistance (Re) 3.5 Ohm
    • Voice coil inductance (Le) 0.046 mH
    • Mechanical Q (Qms) 1.79
    • Electromagnetic Q (Qes) 0.27
    • Total Q (Qts) 0.24
    • Compliance equivalent volume (Vas) 0.005 ft.³
    • Mechanical compliance of suspension (Cms) 1.37 mm/N
    • BL Product (BL) 3.49 Tm
    • Diaphragm mass Inc. air load (Mms) 1.25g
    • Maximum linear excursion (Xmax) 1.3 mm
    • Surface area of diaphragm (Sd) 9 cm².

    Dimensions:

    • Overall outer diameter 1.81 "
    • Baffle cutout diameter 1.67"
    • Depth 0.61"

    Enclosure Recommendations:

    • Sealed Volume0.000378 ft.³.
    • Sealed F3 435 Hz
    • Vented volume0.00083 ft.³
    • Vented F3 273.1 Hz

      Regular price €27,99

      inkl. MwSt., zzgl. Versand

      1 piece
      Delivery time: 5-10 days