Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
The components were put together so that the amplifiers produce the maximum possible performance with the selected speakers.

The set includes everything you need for complete and safe cabling!
If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
The set includes the following components:
  • 1x HERTZ Compact Power HCP 4DK 4-channel amplifier
  • 1x HERTZ Mille Pro MPK 165P.3 front system
  • 1x HERTZ SPL SHOW SS12D2 subwoofer
  • 1x Masori 12" bass reflex cabinet 48L (free of charge)
  • 1x Stinger SK4241 25mm² cable set incl. fuse (free of charge)
  • 1x Masori 15m 2,5mm² speaker cable (free of charge)
What you could optionally
use in addition:
  1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
  2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
  3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
  4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
  5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.

Key Features HERTZ Compact Power HCP 4DK 4-channel amplifier:

  • 4-channel Class D amplifier of the Hertz Compact Power series
  • Power: 4x 120W at 4 Ohm
  • Power: 4x 220W at 2 Ohm
  • Power: 2x 120 W at 4 Ohm + 1x 440 W at 4 Ohm
  • Power: 2x 220 W at 2 Ohm + 1x 440 W at 4 Ohm
  • Power: 2x 440 W at 4 Ohm
  • Impedance minimum: 2 Ohm
  • Dimensions: 315 x 190 x 50 mm (length x width x height)
  • Weight: 2,73 kg

Key Features HERTZ Mille Pro MPK 165P.3 Front System:

  • 2-way 6.5" (16.5cm) front system set of the Hertz Mille Pro series.
  • The set differs from the MPK165.3 by the 3Ohm woofer for more level at the same power amp output and a different crossover.
  • The set consists of:
    • 2x Hertz MP25.3 tweeter
    • 2x MP165P.3 bass-midrange driver
    • 2x crossover MPCX 2P.3
  • diaphragm diameter: 165mm / 25mm
  • power handling: 230/115 Watt max/rms
  • Impedance: 3Ohm
  • frequency response: 45Hz - 22,5khz
  • Efficiency: 93db spl
  • Parameter HT/MT:
    • D 25mm / 165mm
    • Xmax ±4,5mm

    Key Features HERTZ SPL SHOW SS12D2 Subwoofer:

    • 12" (30cm) SPL subwoofer of the Hertz SPL Show series.
    • Power handling: 1000W RMS / 2000W Max
    • Impedance: D" (2 + 2 Ohm)
    • Efficiency: 86 dB/SPL
    • magnet: Ferrite
    • Dimensions and Weight:
    • Outer diameter: 320 mm
    • Mounting diameter: 283 mm
    • Magnet diameter: 170 mm
    • total depth: 184 mm
    • Installation depth: 161 mm
    • Weight: 8.8 kg per unit

    Key Features Masori 12" bass reflex cabinet 48L:

    • Height : 380mm
    • Width : 520mm
    • Depth bottom : 382mm
    • Depth top : 266mm
    • Woofer cutout : 275mm
    • Volume : 48 l
    • reflex tube diameter : 100mm
    • reflex tube length: 280mm

    Key Features Stinger SK4241 25mm² Cable Set:

    • Cable set for a maximum amplifier power of 1500 Watt (RMS) / 150A.
    • Cable cross section: 25 mm² made of 100% copper!
    • Scope of delivery:
      • 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
      • 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
      • 5,18m 0,82mm² remote power cable (matt-blue)
      • 60A Fuse
      • Fuse holder SPD5101 AGU
      • 25mm² crimp ring terminals, pre-installed
      • 1.5mm² Piston Connector (blue)
      • 25mm² Snap In Protective Fire Sleeve
      • Mounting screws
      • 10x cable ties (17,8cm / 7")
      Rated 5/5 based on 28 customer reviews
      Benedikt Golla - by , Feb 07, 2021

      SPL-START complete set HERTZ

      Masori SPL-START Komplettset HERTZ SPL-Start
      Masori SPL-START Komplettset HERTZ SPL-Start
      Masori SPL-START Komplettset HERTZ SPL-Start
      Masori SPL-START Komplettset HERTZ SPL-Start
      Masori SPL-START Komplettset HERTZ SPL-Start
      Masori SPL-START Komplettset HERTZ SPL-Start
      Masori SPL-START Komplettset HERTZ SPL-Start

      SPL-START complete set HERTZ

      🚀 ANGEBOT

      Masori

      Regular price €965,79 €797,00 SPARE €168,79

      inkl. MwSt., zzgl. Versand

      Our complete sets consist of perfectly matched components that fit together perfectly in terms of both sound and performance to create a harmonious sound image.
      The components were put together so that the amplifiers produce the maximum possible performance with the selected speakers.

      The set includes everything you need for complete and safe cabling!
      If you do not need individual components, or want to exchange them for others, write us briefly, we will then change the offer immediately according to your wishes.
      The set includes the following components:
      • 1x HERTZ Compact Power HCP 4DK 4-channel amplifier
      • 1x HERTZ Mille Pro MPK 165P.3 front system
      • 1x HERTZ SPL SHOW SS12D2 subwoofer
      • 1x Masori 12" bass reflex cabinet 48L (free of charge)
      • 1x Stinger SK4241 25mm² cable set incl. fuse (free of charge)
      • 1x Masori 15m 2,5mm² speaker cable (free of charge)
      What you could optionally
      use in addition:
      1. RCA cable. Do you have an aftermarket radio or a factory radio? If you have an aftermarket radio you need the right amount of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
      2. Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this purpose you can cover them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, with which you can create an even clearer sound reproduction, without disturbing noises.
      3. Additional battery. Depending on the existing vehicle battery, it is useful from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
      4. Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. Here, a power cap or an additional battery provides a remedy.
      5. Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.

      Key Features HERTZ Compact Power HCP 4DK 4-channel amplifier:

      • 4-channel Class D amplifier of the Hertz Compact Power series
      • Power: 4x 120W at 4 Ohm
      • Power: 4x 220W at 2 Ohm
      • Power: 2x 120 W at 4 Ohm + 1x 440 W at 4 Ohm
      • Power: 2x 220 W at 2 Ohm + 1x 440 W at 4 Ohm
      • Power: 2x 440 W at 4 Ohm
      • Impedance minimum: 2 Ohm
      • Dimensions: 315 x 190 x 50 mm (length x width x height)
      • Weight: 2,73 kg

      Key Features HERTZ Mille Pro MPK 165P.3 Front System:

      • 2-way 6.5" (16.5cm) front system set of the Hertz Mille Pro series.
      • The set differs from the MPK165.3 by the 3Ohm woofer for more level at the same power amp output and a different crossover.
      • The set consists of:
        • 2x Hertz MP25.3 tweeter
        • 2x MP165P.3 bass-midrange driver
        • 2x crossover MPCX 2P.3
      • diaphragm diameter: 165mm / 25mm
      • power handling: 230/115 Watt max/rms
      • Impedance: 3Ohm
      • frequency response: 45Hz - 22,5khz
      • Efficiency: 93db spl
      • Parameter HT/MT:
        • D 25mm / 165mm
        • Xmax ±4,5mm

        Key Features HERTZ SPL SHOW SS12D2 Subwoofer:

        • 12" (30cm) SPL subwoofer of the Hertz SPL Show series.
        • Power handling: 1000W RMS / 2000W Max
        • Impedance: D" (2 + 2 Ohm)
        • Efficiency: 86 dB/SPL
        • magnet: Ferrite
        • Dimensions and Weight:
        • Outer diameter: 320 mm
        • Mounting diameter: 283 mm
        • Magnet diameter: 170 mm
        • total depth: 184 mm
        • Installation depth: 161 mm
        • Weight: 8.8 kg per unit

        Key Features Masori 12" bass reflex cabinet 48L:

        • Height : 380mm
        • Width : 520mm
        • Depth bottom : 382mm
        • Depth top : 266mm
        • Woofer cutout : 275mm
        • Volume : 48 l
        • reflex tube diameter : 100mm
        • reflex tube length: 280mm

        Key Features Stinger SK4241 25mm² Cable Set:

        • Cable set for a maximum amplifier power of 1500 Watt (RMS) / 150A.
        • Cable cross section: 25 mm² made of 100% copper!
        • Scope of delivery:
          • 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
          • 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
          • 5,18m 0,82mm² remote power cable (matt-blue)
          • 60A Fuse
          • Fuse holder SPD5101 AGU
          • 25mm² crimp ring terminals, pre-installed
          • 1.5mm² Piston Connector (blue)
          • 25mm² Snap In Protective Fire Sleeve
          • Mounting screws
          • 10x cable ties (17,8cm / 7")

          €965,79 €797,00 SPARE €168,79

          inkl. MwSt., zzgl. Versand

          1 set
          Delivery time: 5-10 days