- 1x DD Audio D5.500 5-channel amplifier
- 2x DD Audio VO-B1a tweeter
- 2x DD Audio VO-M6.5 bass-midrange driver
- 1x DD Audio LE-M10D 25cm subwoofer
- 1x Stinger SK4241 25mm² cable set incl. fuse(free of charge)
- 1x Masori 25m 2.5mm² speaker cable(free of charge)
- RCA cable. Do you have an aftermarket radio or a factory radio? For an aftermarket radio you need the appropriate number of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
- Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this you can glue them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, which creates an even clearer sound reproduction, without noise.
- Additional battery. Depending on the existing vehicle battery, it makes sense from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
- Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. A power cap or an additional battery can help here.
- Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.
Key Features DD AudioD5.5005 channel amplifier:
- 5-channel amplifier in mini design
- 1Ohm stable
- Dimensions: 350 x 125 x 55 mm
- Power @ 4Ω 14,4v 0,1% THD: 4x90 + 1x200 Watt
- Power @ 2Ω 14,4v 0,1% THD: 4x130 + 1x310 Watt
- Power @ 1Ω 14,4v 0,1% THD: + 1x500 Watt
Key Features DD Audio VO-B1a tweeter:
- VO-B1a Bullet Tweeter Series
- Power: 50W RMS
- Peak power: 100W
- Voice coil diameter: 1"
- Impedance: 4 ohm
- frequency response (Hz): 3.5kHz - 20kHz
- Efficiency in dBSPL: 104
- Mounting diameter (MM): 59
- Mounting depth (MM): 38
Key Features DD Audio VO-M6.5 bass-midrange driver:
- 16,5cm (6,5") bass-midrange driver
- Impedance - 4 Ohm
- Power (RMS) - 60 watts
- Power maximum - 300 watts
- Resonant frequency: 66Hz
- Sensitivity - 91 dB
- Equivalent volume Vas: 11.4l
- Frequency Range - 70Hz-13KHz
- Installation depth: 66mm
- Mounting diameter: 146mm
- Outer diameter: 165mm
Key Features DD Audio LE-M10D 25cmSubwoofers:
- DD Redline Series Subwoofer
- 10" (25cm) sandwich paper cone
- D2 (2x2Ohm) impedance
- Patented ferrite magnet system
- Lossless linear suspension
- Foam surround
- Aluminum die cast basket
- Tuning frequency: 40 Hz
- Recommended amplifier power: 500 watts RMS
- Dimensions: 482 x 279 x 304 mm
Key Features Stinger SK4241 25mm² Cable Set:
- Cable set for a maximum amplifier power of 1500 watts (RMS) / 150A.
- Cable cross section: 25 mm² made of 100% copper!
- Scope of delivery:
- 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
- 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
- 5.18m 0.82mm² remote power on cable (matte blue)
- 60A fuse
- Fuse holder SPD5101 AGU
- 25 mm² crimp ring terminals, pre-installed
- 1.5 mm² piston connector (blue)
- 25 mm² snap in protective fire sleeve
- Mounting screws
- 10x cable ties (17,8cm / 7")
SPL-START Komplettset DD Audio
Masori
Regular price
€1.126,85*
€1.019,96
SPARE €106,89
inkl. MwSt., zzgl. Shipping
- 1x DD Audio D5.500 5-channel amplifier
- 2x DD Audio VO-B1a tweeter
- 2x DD Audio VO-M6.5 bass-midrange driver
- 1x DD Audio LE-M10D 25cm subwoofer
- 1x Stinger SK4241 25mm² cable set incl. fuse(free of charge)
- 1x Masori 25m 2.5mm² speaker cable(free of charge)
- RCA cable. Do you have an aftermarket radio or a factory radio? For an aftermarket radio you need the appropriate number of RCA cables, which you can find under our accessories. You need 1 cable per channel. If you have a factory radio, connect the original speaker wires to the high inputs of the power amp, or use a separate Hi-Low converter.
- Attenuation. With the increased music power, trim parts can suddenly start to vibrate. For this you can glue them from the inside with Alubutyl, this is also recommended for the inside of the vehicle sheet metal, which creates an even clearer sound reproduction, without noise.
- Additional battery. Depending on the existing vehicle battery, it makes sense from about 600W total power of the amplifier, to install an additional battery. You can find this under our accessories -> batteries. For which amplifier power, the respective battery is useful, is noted in the title of the batteries.
- Capacitor (PowerCap). A capacitor compensates for the voltage drops that can occur in the vehicle electrical system during strong bass hits. This is noticeable by an unclean bass reproduction, or slightly dimming lights in the interior. A power cap or an additional battery can help here.
- Rear system. The speakers in the rear doors of your car do not have the same power as the front system. Generally it is sufficient to replace only the front system. However, if you want a homogeneous sound from all speakers, we will be happy to create an individual complete set for you.
Key Features DD AudioD5.5005 channel amplifier:
- 5-channel amplifier in mini design
- 1Ohm stable
- Dimensions: 350 x 125 x 55 mm
- Power @ 4Ω 14,4v 0,1% THD: 4x90 + 1x200 Watt
- Power @ 2Ω 14,4v 0,1% THD: 4x130 + 1x310 Watt
- Power @ 1Ω 14,4v 0,1% THD: + 1x500 Watt
Key Features DD Audio VO-B1a tweeter:
- VO-B1a Bullet Tweeter Series
- Power: 50W RMS
- Peak power: 100W
- Voice coil diameter: 1"
- Impedance: 4 ohm
- frequency response (Hz): 3.5kHz - 20kHz
- Efficiency in dBSPL: 104
- Mounting diameter (MM): 59
- Mounting depth (MM): 38
Key Features DD Audio VO-M6.5 bass-midrange driver:
- 16,5cm (6,5") bass-midrange driver
- Impedance - 4 Ohm
- Power (RMS) - 60 watts
- Power maximum - 300 watts
- Resonant frequency: 66Hz
- Sensitivity - 91 dB
- Equivalent volume Vas: 11.4l
- Frequency Range - 70Hz-13KHz
- Installation depth: 66mm
- Mounting diameter: 146mm
- Outer diameter: 165mm
Key Features DD Audio LE-M10D 25cmSubwoofers:
- DD Redline Series Subwoofer
- 10" (25cm) sandwich paper cone
- D2 (2x2Ohm) impedance
- Patented ferrite magnet system
- Lossless linear suspension
- Foam surround
- Aluminum die cast basket
- Tuning frequency: 40 Hz
- Recommended amplifier power: 500 watts RMS
- Dimensions: 482 x 279 x 304 mm
Key Features Stinger SK4241 25mm² Cable Set:
- Cable set for a maximum amplifier power of 1500 watts (RMS) / 150A.
- Cable cross section: 25 mm² made of 100% copper!
- Scope of delivery:
- 5,5m Hyper-Twist 4GA 25mm² OFC power cable (matt red)
- 0,9m Hyper-Twist 4GA 25mm² OFC ground cable (matt-black)
- 5.18m 0.82mm² remote power on cable (matte blue)
- 60A fuse
- Fuse holder SPD5101 AGU
- 25 mm² crimp ring terminals, pre-installed
- 1.5 mm² piston connector (blue)
- 25 mm² snap in protective fire sleeve
- Mounting screws
- 10x cable ties (17,8cm / 7")